Question about StarTech.com StarView SV211K 2-port KVM Switch
Try and determine the lowest transponder frequency that you can get a signal on.
Look at the frequencies you already have on the channels saved so far and choose the lowest.
Then in the installation menu select MANUAL SCAN and set that as the frequency.
Make sure you can see a signal and scroll down to Network scan and change to ENABLE with the Right arrow.
While still highlighted, click OK.
Scanning should then begin. It will say 1/1 to start with but should then jump up to 1/?? (the ?? being 2 digits).
Posted on Dec 11, 2008
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Jun 10, 2009 | StarTech.com StarView SV211K 2-port KVM...
Mar 26, 2009 | StarTech.com StarView SV211K 2-port KVM...
Jan 07, 2009 | StarTech.com StarView SV211K 2-port KVM...
67 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: