Question about Konica Minolta MAGICOLOR 2300W LASER Printer

1 Answer

Konica Minolta Magicolor 2300w---

Print's a half of sheet and then jams

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

Try this, I had the same problem, and this worked for me, TURN OFF the printer and OPEN the back of the printer, NOT where the cartridges go, you will see TWO LIGHT GREEN LEVERS at the top, lift them up and gently pull down the BLACK FRAME READING CAUTION, this area can be very hot to touch, so make sure the printer is OFF and FEELS COLD, then with a BABY WIPE clean THE INSIDE, especially the SPIKES or GROOVES where the paper should transfer out. BEFORE CLEANING these SPIKES or GROOVES can get a STICKY BUILD-UP that catches the paper and needs a good cleaning.
After cleaning, put back BLACK FRAME READING CAUTION and replace the LIGHT GREEN LEVERS to their position, close the BACK COVER and TURN ON your printer. Try again.

Anytime this happened to me, I done this and the printer worked perfect.

Posted on Jun 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Konica Minolta Magicolor 2300W firmware needed


firmware is located on secure web site try having a Konica Minolta tech come out and flash the firmware

Apr 15, 2010 | Minolta magicolor 2300W Laser Printer

1 Answer

I just installed 4 new toner cartridges in my magicolor 2300 DL and I still can't print. It is still tellimg me to change the cartridges. Help!


You have to tell the printer that you have replaced the cartridges.
Here are step by step instructions:

http://www.laserquipt.com/support/idx/0/012/article/How-To-change-a-Konica-Minolta-2300W-cartridge.html

Also, check to make sure that you have removed all the tabs and plastic strips from the toner cartridge.

Aug 04, 2009 | Konica Minolta magicolor 2300DL Laser...

1 Answer

Driver


Hi,
Here is the link to download your driver.

Konica Minolta Magicolor 2300W

Thanks

Mar 12, 2009 | Konica Minolta MAGICOLOR 2300W LASER...

1 Answer

Paper jam message on Magicolor 2300W


How do you clean the rubber rollers, hope you didnt use solvent....
Use dry cloth with dishwashing fluid only to wipe the rollers.  You will notice the increase in grip immediately.

Dec 17, 2008 | Konica Minolta magicolor 2300DL Laser...

1 Answer

Paper keeps jaming!


Print a test page, then when it jams, notice if the paper made it's way in to fuser (toward the back of the unit. If it got that far, your fuser may be bad.

Let me know.

Nov 22, 2008 | Minolta magicolor 2400W Laser Printer

1 Answer

Paper jam, cleaner kit


If the paper is not situated perfectly in the tray, and it cannot grab the top sheet easily, mine will give the paper jam message. I just adjust the paper in the tray, then open one of the doors, front or back, and close it again, and it usually fixes the "Jam".

Jun 23, 2008 | Minolta magicolor 2300W Laser Printer

1 Answer

Paper jam


open doors and find these solenoids, clean them and make sure they are moving fine, its not so hard. just step by step move with paper and find out where the solenoids are. solenoids aren't expensive so if its a solenoid problem you should fix it

May 28, 2008 | Minolta magicolor 2300W Laser Printer

Not finding what you are looking for?

Open Questions:

Printers & Copiers Logo

344 people viewed this question

Ask a Question

Usually answered in minutes!

Top Konica Minolta Printers & Copiers Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

5695 Answers

David Burkhart
David Burkhart

Level 2 Expert

207 Answers

George Mclaughlin

Level 2 Expert

330 Answers

Are you a Konica Minolta Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...