Question about Hitachi CP-X1200 Multimedia Projector

1 Answer

Can't reset lamp timer

We have a Hitachi CP-X1200 Multimedia Projector and just replaced the lamp. When we try to reset the lamp timer the menu won't allow us do the final reset it defalts bac k to the main menu

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Turn on the projector, and reset the lamp timer.
(1) While the projector running, press the MENU button to open the menu.
(2) Choose the “OPTION” on the menu using the / button, then press the
button or ENTER button.
(3) Choose the “LAMP TIME” using the / button, then press and hold the
RESET button for 3 seconds.
(4) Choose the “RESET” using the button.
memo When the lamp has been replaced after

Posted on Jan 22, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I clean the filter of the Hitachi CP-X1200 multimedia Projector ?


Remove and use fine bristle brushes assisted with a jet of air which will clean up the fine netting of the filter. It is important that the filters are occassionally cleaned so that there is no dirt accumulation within the lens unit that can reduce the life of the LAMP and save an expensive repair.

Aug 19, 2011 | Hitachi CP-X1200 Multimedia Projector

1 Answer

Re set timer?


hi,
To reset the lamp hour timer do the following,
1. Power on the projector
2. press the menu button
3. Select option
4. in the option menu select Lamp time
5 press and hold the reset button on the remote or Right arrow button on the projector for 3 seconds
the lamp reset diagonal box will appear
6 using the up arrow button select reset.

Also try to reset the filter time using the same procedure


lamp reset is recommended only after the lamp replacement.
ok

Apr 04, 2011 | Hitachi CP-RS55 LCD Projector

1 Answer

Is the only difference between at CP-X1200 and CP-X1250 the bulb, or is the ballast circuit different too? Just thinking how easily I could boost the brightness from 3500 to 4500 lumens.


Model: CP-X1200 ( Lamp)
Part#: DT00591
Lamp Type: UHB
Wattage: 275 Watts
Lamp Hours: 2000 Hours

Model: CP-X1250 ( Lamp)
Part#: DT00601
Lamp Type: UHB
Wattage: 310 Watts
Lamp Hours: 2000 Hours

I'm not sure but I would think the same ballast board is used, and the trimpots adjustments set in the factory.
If you fiddle with it, you may not be able to get the tube to strike on startup, or worse you can explode the lamp.
Also the extra heat generated may degrade the optics and LCD panels.not mention melting the housing.
Better to leave well alone.

Feb 18, 2011 | Hitachi CP-X1200 Multimedia Projector

1 Answer

Getting message "After replacing lamp, reset the lamp timer." How do I do that?


From the manual located here.

Turn on the projector, and reset the lamp timer.
(1) While the projector running, press the MENU button to open the menu.
(2) Choose the “OPTION” on the menu using the up/down arrow button, then press the right arrow button or ENTER button.
(3) Choose the “LAMP TIME” using the up/down arrow button, then press and hold the
RESET button for 3 seconds.
(4) Choose the “RESET” using the up button.

May 18, 2010 | Hitachi CP-X1250 Multimedia Projector

2 Answers

Cleaning the filter/blinking LAMP and TEMP


Goto Advanced menu and select option then lamp Time hold down the reset button on the unit for 3 seconds until a new screen comes up then hit reset. Do the same for resetting the filter time

Feb 01, 2009 | Hitachi CP-X445 Multimedia Projector

2 Answers

Resetting the air filter timer


If you do not have a remote here is how to reset the filter time. Use the "Menu" bottun to get the "easy menu" to display. Push the down arrow until you get to "Filter Time," then push and hold the RIGHT arrow to reset the filter time. DO NOT try to reset using the "Reset" option on the easy menu, it will not work.

Apr 22, 2008 | Hitachi CP-S335 Multimedia Projector

1 Answer

Hitachi CP R555 Multimedia LCD Projector


Hi there

In your Menu options there is a subfolder where it either reads lamp or lamp timer.

Scroll down to it and hold down you right or left arrow key on the Projector for a couple of seconds.

Mar 23, 2008 | Hitachi Performa CP-RS55 Multimedia...

2 Answers

Hello Wardens wife


What you want to do is go to the advanced menu, find the filter time and using the remote hold down reset button for 3 seconds or so while the filter time is selected. This will bring up a reset menu and reset the timer.

Mar 23, 2008 | Multimedia Projectors

2 Answers

Hitachi CP-X250 LCD Projector


clean filter and reset the filter timer by advanced options filter timer and hold reset till menu shows then arrow up and it will zero out.

Oct 19, 2007 | Hitachi CP-X250 Multimedia Projector

Not finding what you are looking for?
Hitachi CP-X1200 Multimedia Projector Logo

Related Topics:

1,266 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Multimedia Projectors Experts

Electro Med Services...
Electro Med Services...

Level 3 Expert

5653 Answers

The Knight
The Knight

Level 3 Expert

68368 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Hitachi Multimedia Projector Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...