Question about Panasonic KX-T7453 Corded Phone

1 Answer

D1232 Panasonic - Removing Long distance restriction

Hello, I have an issue with my extension. Does anyone know how to remove the long distance extension?? all my other extension can dial out but this one does not allow.
Any help would be great

Posted by on

  • k10bhakta Dec 11, 2008

    this is a motel and I am the owner,, need to figure out how to unlock extension as it is for my living quaters. let me know if you can assist with instructions.

  • Carl Navarro
    Carl Navarro May 11, 2010

    Yep, it's done in Class of Service (COS). Your system administrator should have the programming instructions on how to get into the system and make changes. COS is an installer option. Since this is a public forum, I'll not go into details on exactly how it's done.



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Panasonic Master
  • 2,460 Answers

Changing the Class of Service COS of that extension to "1" will allow it to dial anything.
In a TD system, that is a 2-step process, because you have to find where the extenion jack is located in the system.

Go into programming and dial 003. If you press the SP PHONE button, it will step you through all the ports in the system and give you extension numbers. To start 01-1 will be 101 01-2 201 02-1 102 etc. Since you're in a motel, it should be renumbered to match the rooms and if you started with 100 or eliminated 113 your whole plan may be different.

Once you find the jack number for your station, press the HOLD button and dial 601 SP PHONE and the 2 digit jack number from above. You will be looking at your extension COS. Dial 1 STORE and it will turn off that extension's toll restrictions.

Please rate this solution and let me know if you had any problems following this instructions.


Posted on Dec 12, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I'd like a (relatively) simple answering machine for d1232.

I can get you there, but you have to do some programming.

A Panasonic TD-1232 starts its life with 16 analog and 16 digital ports. On the back of your digital phone is a modular jack called an XDP If you plug in a single line device and dial 390 from the digital set, and it's programmed, you will split the extensions to whatever your number is and 100 more than your number (by default). So, if you're 110, the XDP analog port is 210.

Once you get that far, it's a (fairly) simple matter to go into programming and make 10-2 (the second port for your hardware) ring on any and all lines you choose.

I hope this is a good start, as full programming is beyond the scope of a free forum.



Apr 08, 2009 | Panasonic Lands Phones

1 Answer

I don't know to set the scope for distance and for

removing clutter from My Work Queue and Formn boards

If this problem remains unresolved. repost/comment and ill clarify any issues your having

Mar 31, 2009 | Crosman Optics

1 Answer

Can I program a long distance block on our lobby courtesy phone?

It can be done...

do you know the extension of the phone?
If not goto the phone, press FEATURE *0 and the intercom button, this will tell you the DN of the phone...

Ok, now get into the system programming,

-> TERMINALS&SETS and enter type in the extension of the set
-> hit next till you find RESTRICTIONS and enter
-> then you will find SET RESTRNS enter
-> FILTERS enter
-> typically filter 1 is restrict everything but local calling and internal calling (to find out ~ go back to RESTRN FILTERS and look at the programming) and change all the settings: NORMAL to 1/ AFTERNOON to 1/ NIGHT to 1 etc. to 1

This is how I would restrict a phone that I do not want calling long distance that is in an unsupervised area.

Mar 04, 2009 | NorStar M7324 Telephone

3 Answers

How many stations can a Panasonic D1232 support?

If it says D1232 on the box, it's a TD-1232. Look at the black and silver tag on the side of the KSU, IIRC the TD-1232's tag is on the lower right outside above the power cord. Three is a TA-1232 a TD-1232, and a 123210/11. Only the TD is digital (uses 72xx/74xx phones).

As far as SYSTEM phones, the TA/TD 1232 come out of the box as 8x16 devices and you add cards to expand it. These cards have -70 part numbers and are fairly difficult to find. (I think I have one or two on my shelf). If you really have a 123211, it also expands by using cards, that fit vertically in the card file with an AMP connector plugged into its face. Those are easier to find, the risk there is when you turn off the system to install them, it sometimes forgets to power back up.

Lastly, if you really have a TD with digital phones, there is an ANALOG port on the back of each digital phone that can be wired for seperate extensions (by default it's 100 more than the digital extension). You can add single line devices in those ports.(Some restrictions apply :-). For two quick phones, you might go that route.


Feb 28, 2009 | Panasonic KX-T7453 Corded Phone

1 Answer

Locking overseas call...

The 7730 doesn't do anything. The cabinet the phone is plugged into does. It can be one of about 18 models that Panasonic makes and it has programming rules under TRS (toll restriction). For example, in some models, if you change your extension COS (Class of Service) to 7, it can't dial long distance. In others, you have only 5 COS and you have to build all tables..

In the simplest case, you need to find a programming manual for the particular system and review the section on TRS. In that, you will start by putting 00 in a class from 2-5 and then change the COS of the extension to match. There are other rules like Allow in COS 2 will allow all Allow codes entered in TRS 2-5, but that's for another day.

If you find a model of the cabinet, I can get you pointed in the right direction. I will not build your tables :-)


Nov 08, 2008 | Panasonic KX-T7730 Corded Phone

1 Answer

D1232 extension programming issue

Welcome to Panasonic TD programming....

Even though the hardware doesn't exist, the numbers do. The universe of 101-164 and 201-264 are already taken. Oops, 200 might be available, 100 might be available. 167 and 168 and the 80's might work.

It's a 3 step process. Change 210 to 200 change 225 to 210 and change 200 to 225. There's your "swap".

Now, keep in mind that the XDP port for 110 is 210 and if your voice mail is analog.....Ah, but that's another thread.


Sep 19, 2008 | Panasonic KX-T7453 Corded Phone

1 Answer

7453 Display

Without looking up details on versions, I think you may have an early D1232. Look at the plate on lower edge/front and see if there is a number in a circle. If there is no version number, the serial number will tell when the system was made.

Jul 07, 2008 | Panasonic KX-T7453 Corded Phone

2 Answers

Expanding phone system

We have existing Ativa Model # D5772 & just purchased a 2nd model How do we connect the 2 systems?

Dec 12, 2007 | Panasonic KX-T7453 Corded Phone

Not finding what you are looking for?
Panasonic KX-T7453 Corded Phone Logo

425 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Lands Phones Experts


Level 3 Expert

102366 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers


Level 2 Expert

85 Answers

Are you a Panasonic Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides