Question about Televison & Video

4 Answers

No remote for Swisstec T.V.

We have a Swistec 19'' H.D.ready...built in Freeview...Widescreen L.C.D. T.V. flatpanel. Which we have just purchased , but the remote was lost . We cannot seem to obtain one anywhere, and wondered if you can help us with finding a Universal remote that will cover Swisstec.

Posted by on

  • rhami Dec 11, 2008

    Many many gratefull thanks ! As a pensioner I was not looking forward to buying a new T.V. ! We had tried everywhere localy without success.

    I will let you know if we manage to get a remote from Amazon,

    Thankyou again

    Ann

  • Anonymous Mar 16, 2014

    TV turns on and off

×

4 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 59 Answers

Hi rhami,

The only brand of universal remote I know of that has a code for Swisstec brand TVs is the Integra - the code is 0880.

The other option is to order a replacement remote for your model TV. http://www.amazon.co.uk carries remotes for a wide variety of Swisstec TVs (note that www.amazon.com does *not* offer these since Swisstec is British).

I hope this helps - please let me know if I can be of any further assistance.

Posted on Dec 11, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

If you're still looking go to Swisstec's website at http://www.skymediauk.co.uk/
Replacement changer costs £14.99 + post

Posted on Nov 16, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Had same problem with a 42" Dixel HD ready. Seems like this brand doesn't even exist. With several universal remotes tried all configurations, it didn't work. Finally found the Logitech 525, connected on internet recognized my Dixel remote as a swisstec programmed accordingly and it works! I guess it should work with any Swisstec devices....

Posted on Jun 28, 2009

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

Goto this link, you will find a remote for swisstec who are the same as UMC .
http://www.remotes4u.co.uk/show_models.php?brand=UMC

Posted on Mar 10, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I needreplacement remote control for DVD-R1300


If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand. They can either give you a genuine remote control to your device, or can direct you, from where can you purchase a suitable one.
To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability. Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have.
Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the sites.
http://electro-medical.blogspot.com/

Jan 09, 2017 | Televison & Video

1 Answer

Could you please recommend an app for remote control of my Changhong Smart TV?


If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand. They can either give you a genuine remote control to your device, or can direct you, from where can you purchase a suitable one.
To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability. Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have.
Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the sites.
http://electro-medical.blogspot.com/

Jan 08, 2017 | Televison & Video

1 Answer

Sense tv code for humax freeview


What models are they?
ELECTREPAIRUSA@ELECTREPAIRUSA or you can contact us at that address as we repair/renovate all items electronic and electrical old and new.

Jan 02, 2017 | Humax Televison & Video

1 Answer

I purchased a Sanyo video cassette recorder VHR5206 and it does not have a remote or instruction manual. I don't know how to set the clock or program it???


Without a remote control, you can't access most of its functions. If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand. They can either give you a genuine remote control to your device, or can direct you, from where can you purchase a suitable one.
To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability. Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have.
Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the sites.
http://electro-medical.blogspot.com/
http://electrohelponline.blogspot.com/
http://remotesearch.blogspot.com/
Universal remote controls are available at most of the electronic spare part selling shops. Visit some on-line sites too, which deals with electronic spare parts.

Dec 11, 2016 | Sanyo Televison & Video

1 Answer

Toshiba mv19m4..can i get to the menu without a remote? Want to adjust brightness..


YES THER WIIL BE A BUTTON THAT SAYS MENU DOWN BELOW AND THERE YOU CAN ADJSUT THE BRIGHTNESS CONTRAST SHARPNESS AND SOMETIMES DENSITY OF THE SCREEN INCLUDING THE COLOR

Dec 04, 2016 | Toshiba MV19M4 19 in. TV/VCR Combo

1 Answer

I got bush TV cant get off device cuz havent got remite


Purchase a Logitec Harmony remote. When you set it up, the software asks for the device you intend to control. Enter in your make, and model number. After the remote setup is complete, you should be able to control it.

I would check on the logitec website (logitec.com) before you purchase to make sure your device is supported before making the purchase. But they support just about anything under the sun.

Jan 14, 2015 | Televison & Video

1 Answer

Where can I purchase a replacement remote for my 2004 ESA DVD player?


If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand. They can either give you a genuine remote control to your device, or can direct you, from where can you purchase a suitable one.
To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability? Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have.
Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the site http://electrohelponline.blogspot.com/ Check this site too. http://remotesearch.blogspot.com/ Universal remote controls are available at most of the electronic spare part selling shops.

Dec 20, 2014 | Televison & Video

1 Answer

Veon tv manual


The eject button on the remote appears as an upward-pointing arrow with an underline - see below image. The eject button on the TV has a similar symbol.

4191bd4f-0bce-464a-b56a-423972698140.jpg


However, I suspect that in your case, you might not be having a Remote.

This link says that your TV doesn't come with a Remote and DVD cannot be ejected without the remote :
VEON 19 LED TV DVD FREEVIEW COMBO A1823511 1

Jun 28, 2014 | Televison & Video

1 Answer

My panasonic DMR-EZ45V will not auto -setup restart the dvb freeview channels it goes through the channel numbers but they do not download only the anologue channels download. it is connected to a...


I have one of these with the same problem. I couldn't find any others with answers but there are people giving answers about the DMR-EX75 showing the same problem due to power supply decoupling capacitor failure.
I just ordered a manual for mine from manualzone.com to try to locate the culprits. - Wish me luck!

Jul 25, 2011 | Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

2,699 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69718 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6364 Answers

yadayada
yadayada

Level 3 Expert

63580 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...