Question about Canon imageRUNNER C3200 Color Printer

3 Answers

CAN I RESET A DRUM LIGHT ON FOR A CANON IR 1600?

Drum light and waste toner full light is on

Posted by on

  • Ford Nkandu
    Ford Nkandu May 11, 2010

    Give me model of machine cos the service mode procedure difers from model to model. But try to go in service mode go to copier then function then error then clear. Hope you know to to go in service mode.In case you do not know try just as follows :press * then 28 at same time another screen will pop up then touch copier then do as above.

  • Jay Otaigbe
    Jay Otaigbe May 11, 2010

    What machine do you have?

×

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,219 Answers

Take out the drum.
Open the "cork" on his top side an vacume the waste toner.
If you have E100 error you must replace it, if not, must work

Posted on Jan 14, 2010

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 108 Answers

This machine has no drum light. It has an error light. If the machine is telling you to replace one of the drums, it`s because the drum is either defective or worn out, there is no reset for that, you just have to replace it. The same with the waste toner bottle, it must be emptyed when you get the empty toner message, open the front door and you see the bottle righ there at the bottom.
If you need aservice manual you can get it here
http://www.techmanualarchives.com/canon-irc-2620_3200-_3220-service-amp-parts--manual-25171.html

If you need further assistance from me you can reach me here ultimate_sacrifice@msn.com

Posted on Mar 13, 2010

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 31 Answers

Check clarification request and do as advise.

Posted on Aug 22, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Display on screen when I copying document for a few sheet of paper : system error E019 What is the meaning.


the code error e019 means that the waste toner is full,you must change the drum is 2 in 1 waste toner and the drum are the same ,you can take out the toner of the drum .

Nov 23, 2010 | Canon iR 2016i Black and White Copier

1 Answer

Canon photocopier iR2016 displaying "waste toner full" on screen. How do I fix this?


Hi there you can empty the waste toner box wich is located inside drum unit.

The procedure is next:

open front cover and leftsideway door
release the blue handle above the drum unit
pull out the drum unit
on top of drum unit, near handle is located plastic grey colored cork
remove it and by means of vacume cleaner clean the vaste toner.

Note that if you flip out the drum unit and try to empty waste toner it could be messy and the toner can get into charge roller or on drum cleaning blade and then you need to change it completly.

hope that hepls

Aug 16, 2010 | Canon iR 2016i Black and White Copier

1 Answer

Error code 19


You have waste toner full!
Remove the drum, on top of drum there is cork, remove cork and vacume all the waste toner out.

May 19, 2010 | Canon ImageRunner 2020i Copier

2 Answers

Where is the waste cartridge for the canon ir 2018


If you open the front cover and release the leaver of the drum unit.Remove the drum unit.On the drum itself is a plastic plug,remove the plastic plug and remove the waste toner in to a bin.The waste toner is stored behind the drum and must be removed reguarly.

Dec 14, 2009 | Canon imageRUNNER 2018 Copier

2 Answers

CANON 1600


Try to clean the drum & shake toner & it's nothing to do with transfer roller for sure , it's your drum unit only . Another thing ,was your drum unit exposed to light for more time than normal , in that case try another drum ,try this i think that will solve your problem

Jul 10, 2009 | Canon imageRUNNER 1630 Copier

3 Answers

Canon imageRUNNER 2020 alternates between displaying Error Code E019 and saying "Waste Toner Full".


hi you have a waste toner error code, the waste toner is apart of the drum unit in these machines so you will need to order a new drum unit for it.
easiest way to fix the problem.
Canon Tech

May 28, 2009 | Canon imageRUNNER 2000 Copier

2 Answers

Wast tuner is full!


you need to empty the waste toner inside the drum cartridge,open the front door pull the lever down and take the drum cartridge out(with care) there is a cover on top of it.

May 23, 2009 | Canon iR 2022 Printer

2 Answers

Canan ir 1018 make sound


Normally nise come from the drum unit when the waste toner is too full.Remove the waste toner by removing the drum unit and remove the waste toner plug and disgard the waste toner and reinsert the drum unit.

May 18, 2009 | Canon imageRUNNER 1023iF Black and White...

1 Answer

Waste Toner is full. It's a iR2020/iR2016 photocopier and I need to clean it. Please help.


Hello sir; According this particular model,the waste toner box comes with drum unit, for another word if waste toner box is full you have to replace whole drum cartridge.

May 08, 2009 | Canon iR 2016i Black and White Copier

Not finding what you are looking for?
Canon imageRUNNER C3200 Color Printer Logo

702 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Printers & Copiers Experts

kakima

Level 3 Expert

96576 Answers

old marine
old marine

Level 3 Expert

1472 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Canon Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...