Question about HP LaserJet 2300d Printer

2 Answers

Hp2300 laser printer

Error code 52

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 62 Answers

Hi,

52.x PRINTER ERROR alternates with To continue turn off then on Possible printer control panel error messages 52.0 PRINTER ERROR 52.1 PRINTER ERROR 52.2 PRINTER ERROR Description A temporary printing error occurred. The x can equal one of the following: 0 = Scanner error 1 = Scanner startup error 2 = Scanner rotation error This error can also indicate a problem with the shutter tab on the print cartridge. Action

  1. Turn the printer power off, and then turn on the printer power.
  2. If the message persists, check the print cartridge for damage.
    1. Verify if the shutter tab on the cartridge is broken or damaged. click on the below link. Shutter tab on the print cartridge
  3. 1 - Shutter Tab
  4. Replace the cartridge if damaged.
If the message continues to persist, then download the printer software based on operating system and reinstall.

HP Laser-Jet 2300d Printer Software


Regards
Chittaranjan

Posted on Jan 02, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

We need the driver for hp laserjet 2300

Posted on May 15, 2009

4 Suggested Answers

seeker5211
  • 1089 Answers

SOURCE: HP Laser Jet 4 Plus error code 52

A 52 error is a Scanner failure. Do you hear a "whirring" sound when you get the error?

That's the sound of the scanner motor running amuck.

You're probably going to have to replace the Laser/Scanner assembly or the DC Controller which controls the Laser/scanner motor.

Posted on Jan 23, 2010

  • 731 Answers

SOURCE: Error : 52 scanner error

Turn the unit off for at least 30 seconds before power it back on.
If you have the unit on a surge protector ... remove it as these unit can create low voltage problems for laser printers.
If the problem persists ( and there's a 50-50 chance it will) my 20+ years experiance with HP printer says you need a new scanner assembly. HP Part# RM1-4724-005CN $90-$120 + installation

It may be better to replace the printer as a used one can be bought for about $250

Posted on Nov 25, 2010

  • 304 Answers

SOURCE: scaner error 52 in my

52 Scanner Error
The all-in-one has experienced an internal hardware error.

1. Turn off the power by using the power switch, and then wait at least 30 seconds.
2. If a surge protector is being used, remove it. Plug the all-in-one directly into the wall socket.
3. Check the FFC connection between the formatter and the scanner.
NOTE Do not bend or fold the FFCs during the removal or reinstallation process.
4. Try connecting the product to a different power source or surge protector.
5. Turn on the power and wait for the all-in one to initialize.
6. If the error persists, replace the laser scanner assembly.

Posted on Jul 12, 2011

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bizhub C250 using to much toner. Images are very dark. Ink can even be rubbed off pages. How do you adjust?


Check that the fuser is not in enevople mode. two green handle up not down. check the files

Oct 28, 2016 | Konica Minolta bizhub C250 All-In-One...

3 Answers

HP Laserjet 3330. Scanner bulb warming up doesn't go away. I have done the "solution 1" as discribte but nothing is happening. It goes like: - i put the power on, hewlett packard is flashing, the...


How does the bulb look? Is it bright or kind of dim. The bulb warming error is designed to halt use of the machine until the scanner bulb reaches the correct output level. As these are basically a flourescent tube, they will dim over time and at a certain point they will not generate enough light to enable proper scanning. If the bulb is dim, it will require replacement.

Mar 14, 2011 | Office Equipment & Supplies

1 Answer

My fax wont work in my ricoh aficio 1515 mf??


Using the 1515 as a fax machine is a pretty simple procedure if everything works right. All you have to do is hook a working phone line up to the phone jack on the back of the copier (the one labeled LINE, not TEL).

Why won't the fax work? If it is giving you an error message, what is the message?

If you are not getting a dial tone when faxing, unplug the fax from the phone line and plug a working phone in, and see if the phone gets a dial tone. If it doesn't, there is a problem with your phone line.

You can also try plugging the fax machine into another phone line. If the fax works on that line, then there may be a problem with the first line.

Are you having problems sending faxes or receiving them, or both?

Jan 05, 2010 | Office Equipment & Supplies

Not finding what you are looking for?
HP LaserJet 2300d Printer Logo

804 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

100492 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...