Clicker garage door keypad works inconsistently

If your opener doesn't have safety sensors in the doorway this keypad will not work with it.

No the clickers will only work with openers with sensors.

Have you tried adjusting the antenna position? If you can't find a good position for the antenna, you may want to extend it and bring it close to or outside the garage door opening.

The radio frequency has changed and the old keypad will not work with the new opener.

I find Clicker products confusing. Might want to buy whole new replacement readio control set. how old is operator?

what keypad are you using with new opener? Frequency has changed. can't use old one. you probably never needed to change things; just needed to follow proper coding procedures.

Does your wall console have a LOCK or VACATION setting. Turn off.

My best advise to you is get the brand name remote for your opener. I know it sounds like a pain but click brands are not super great because there supposed to work for many different kinda. For the most part you can call your local garage door dealer and pick one up for your opener. They may sell you a lift master brand opener which is find sears/liftmaster/chamberlain are all the same. Should only be about 35 bucks if you pick it up

Have you replaced the battery in your keypad? That should take care of the trick.

I have a Liftmaster 377LM wireless Keypad no maual

How do I reset it?