Question about BenQ FP937s+ (Silver) 19" LCD Monitor

Open Question

Inverter DS-1107A damaged

The inverter DS-1107A of my BenQ fp937s+ is damaged. A new one is available for a 17" screen but not for the 19" inch which I have. Can you tell me where I can get a DS1107A inverter for a 19" Benq fp937s+.
Thanks for the reply.

Posted by on

5 Suggested Answers

alxz
  • 89 Answers

SOURCE: BenQ FP731 17" LCD Monitor Problem

Its a problem with the inverter. check the 4 transistors, C5707 near the connectors for the backlight. If none are defective, look for the PF751 FUSE. It sure to be busted.You can replace that with another 3A fuse. Remember, you should only replace the fuse if you are certain there are no busted transistors in the inverter board. Otherwise, you now have a refurbished Benq Monitor

Posted on Jan 07, 2008

  • 1 Answer

SOURCE: Benq FP731 17" monitor goes Blank after start up

The only solution I've been able to find for this is to turn off the computer for a minute or two and reboot, while rebooting, it is important to keep the mouse moving so the arrow on the screen moves. This should provide a temporary fix, I'm unsure about a permanent one.

Posted on Sep 03, 2007

viziks
  • 220 Answers

SOURCE: BenQ FP731 17" Inverter transistors

T751,752,753,753 are the transformers to be resoldered ,and resolder Transistors Q759,60,39,40,43,51.
Please check them with a multimeter if you are adept .
Please rate the solution and provide feedback.
Samir

Posted on Apr 25, 2008

viziks
  • 220 Answers

SOURCE: BenQ FP71G+ screen blank

If front power led is on and No display ,Problem is with Inverter circuit.The post u descibe should help you determine with certainity that Inverter is the issue.
Samir

Posted on May 08, 2008

viziks
  • 220 Answers

SOURCE: Benq inverter board schemtic

Post me a picture of the board and I might be able to Help.Normally transistors 2Sc5707 are defective.
Samir.
viziks@gmail.com

Posted on Sep 12, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

17" flat screen upper half is dark until "thumped"!


The inverter board that controls the lighting on the screen is dying. since its a 5 year old monitor and only a 17 inch. the cost to repair is greater than the cost of buying a new one. unless you know how to replace the part yourself. I think its best to just buy a new monitor

May 04, 2010 | Rosewill R900J 19" Flat Panel LCD Monitor

1 Answer

Benq T905 Monitor's green light turns on and then off


Check for blown MOSFET IRFU9024N and transistors C5707/5706, and fuse in the inverter circuits section. Also look for bad caps with bulging top/seal. See some pictures of failed Dell monitors (BenQ made alot of monitors for Dell), http://s807.photobucket.com/home/budm/allalbums

Mar 14, 2010 | BenQ T905 (Black, Silver) 19 inch LCD...

1 Answer

Ds-1107a inverter/power supply no power or comes on &LCDflickers


Classic sign of bad inverter. Since it is inside the LCD not something you can fix yourself unless you work with electronics. Needs to go to the repair shop.

Jan 01, 2009 | Dell E173FPb 17" TFT LCD Monitor

2 Answers

Benq t905 monitor blank


Fist check the fuse on the inverter board if it is blown replace it if not you need another inverter board as it has fried. But I looked and was unable to find a new/replacement inverter online so I wish you the best of luck

Dec 08, 2008 | BenQ T905 19" LCD Monitor

1 Answer

Screen blackout


I had the same problem and fixed it with a new backlight inverter board. It was a pretty easy install. The part is available on eBay. http://cgi.ebay.com/New-Inverter-for-Dell-W1700-17-inch-LCD-TV_W0QQitemZ400017456720QQcmdZViewItemQQptZLH_DefaultDomain_0?_trksid=p3286.m20.l1116

Nov 07, 2008 | Dell W1700 17 in. HD-Ready LCD Television

1 Answer

BenQ FP71G+ screen blank


If front power led is on and No display ,Problem is with Inverter circuit.The post u descibe should help you determine with certainity that Inverter is the issue.
Samir

Apr 08, 2008 | BenQ FP71G 17" LCD Monitor

1 Answer

Can repairs be made to BenQ FP731 17 inch Flat Screen.


The power and Inverter board has a problem.Check Inverter transistors and the related fuse.

Jan 30, 2008 | BenQ FP731 17" LCD Monitor

Not finding what you are looking for?
BenQ FP937s+ (Silver) 19" LCD Monitor Logo

Related Topics:

847 people viewed this question

Ask a Question

Usually answered in minutes!

Top BenQ Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Tony

Level 3 Expert

2598 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

Are you a BenQ Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...