Question about Sector 2653940025 Wrist Watch

1 Answer

Sector 250 Chronograph Alarm

I just bought this watch and I need instructions how to set the alarm and etc.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 1 Answer

The middle dial on the right side of the watch is used to switch from watch settings to alarm settings..
pull the middle dial out to put it in alarm mode.
To set alarm:
-pull the center knob out.
-with it out you can now use the bottom (right) knob to set the alarm.
-pull the bottom right knob out one notch
-turn the knob clockwise or counter clockwise to set the alarm time
-push the knob back in (all the way)

the alarm is now set

if the center (right) knob is pulled out the alarm is ON
if the center (right) knob is pushed in the alarm is OFF
--------------------------------------------------------
I have owned this watch for about 10 years now and love it.
the past few years the chronograph buttons (on the left side of the watch) were not working well rendering the chronograph and count down timer functions unusable.

repairing a chronographs is expensive and watch makers usually charge several hundred dollars which is not a feasible fee for a watch of this value so i decided to open it up my self and clean it up and that did the trick.. its working like new!

enjoy the watch!

Posted on Jan 09, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Set alarm on sector 550 chronograph alarm saphire crystal


Thanks for help!I love older Sector swiss watches !Those watches were built to last!

Sep 23, 2013 | Watches

1 Answer

Manuel for yacht timer 700 please. Best regards P.Hessner


Could not find a download for instructions on this watch, but I did manage to find some basic instructions for the Sector brand. I hope this helps as this is the best I can come up with.
Good luck.
Sector Chronograph Watch Instructions
  • Most chronograph watches have screw-down crowns for water resistance. You must unscrew the watch crown before you can make any changes to the watch time. After time is set screw the crown back in. To utilize the chronograph dials, use the buttons on the side of the watch. One button will be for the second timer. Press once for the second hand to start timing. Press again to stop it. Another button will be to reset the second hand timer back to zero. Sector Chronograph watches may have different dial functions (see link in References).
  • Sector Dual-Time Watch Instructions
  • Because Sector watches are known for their sports capabilities, the Dual-Time watches have screw-down crowns. For Dual-Time timepieces, unscrew the crown counterclockwise. Pull the crown to middle position to set the date. Pull the crown out to its fully extended position and rotate it to set the day of the week, hour and time. Press and hold in the crown and turn clockwise to seal the crown back in to the watch.
  • Sector Ana-Digi Watch Instructions
  • Sector Ana-Digi timepieces have analog hands plus digital timekeeping functionality. To set the time, unscrew the crown counterclockwise and then clockwise to the appropriate time. The digital functionalities are programmed by the buttons on the side of the case. Depending on the style of the Sector watch, you can set the digital time with one button, set the date display, 1/100 seconds chronograph timer, altimeter, thermometer and alarm functions.
  • Aug 12, 2010 | Sector 700 2653700025 Watch

    1 Answer

    Need instructions for seabo watch


    i have a wristwatch by seabo #so-6117 i do not know how to set the alarm, time, chronograph, etc.i need to set the watch.

    Jun 23, 2010 | Bulova Watch

    1 Answer

    Coutura Chronograph Watch: set the alarm on a coutura chronograph...


    pull the crown out 2 clicks.... set the alarm the same as your current time on your watch..... push the crown in 2 clicks..... than pull the crown out 1 click ..... set the alarm at the desired time with the lower button..... than push the crown in 1 click .... the alarm is ON

    or go to this address http://caliber.seikowatches.com/ select the desired language than - alarm chronograph and play the alarm option on your right

    May 17, 2010 | Seiko Coutura Chronograph Watch

    2 Answers

    How to use seiko coutura chronograph alarm?


    pull the crown out 2 clicks.... set the alarm the same as your current time on your watch..... push the crown in 2 clicks..... than pull the crown out 1 click ..... set the alarm at the desired time with the lower button..... than push the crown in 1 click .... the alarm is ON

    or go to this address http://caliber.seikowatches.com/ select the desired language than - alarm chronograph and play the alarm option on your right

    May 19, 2010 | Watches

    1 Answer

    Looking for instructions for a Seiko digital alarm chronograph solar powered back has 8n1913 the 8 could be a B. Thanks


    seiko chronograph set the alarm etc pull the crown out 2 clicks.... set the alarm the same as your current time on your watch..... push the crown in 2 clicks..... than pull the crown out 1 click ..... set the alarm at the desired time with the lower button..... than push the crown in 1 click .... the alarm is ON

    or go to this address http://caliber.seikowatches.com/ select the desired language than - alarm chronograph and play the alarm option on your right

    May 14, 2010 | Watches

    1 Answer

    How do you use the alarm in the Seiko coutoura chronograph?


    You can obtain instructions from the Seiko web site "seiko.com".

    Go to their web site, click on "support". The on "instruction booklets",

    You can either enter the number off your watch or choose the instructions from the list.

    Jan 25, 2010 | Seiko Coutura Chronograph Watch

    4 Answers

    How to set alarm on seiko chronograph sports 100


    pull the crown out to the first click press the reset chronograph button until the hands on the small alarm dial start to move.set the alarm time press the crown back!

    Jan 15, 2010 | Watches

    Not finding what you are looking for?
    Sector 2653940025 Wrist Watch Logo

    1,416 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Sector Watches Experts

    Les Dickinson
    Les Dickinson

    Level 3 Expert

    18297 Answers

    Tom Chichester

    Level 3 Expert

    24347 Answers

    Are you a Sector Watch Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...