Hi i have a Medion 2120 laptop and when you turn it on you a screen saying press f2 to enter setup but when you press f2 nothing happens. I have replaced the keyboard and removed the backup battery. But no joy . any help would be geat chears Bob
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
i have had the same fault with my medion mim2230 and tryed everything you list and i now have put it down to a battery pack fault why i say that is i removed my battery and laptop works ok some i ordered a battery of
ebay and placed it in my laptop and now its ok but just to make sure
i put my old battery pack back in my medion mim2230 and it come up with the same fault again so turned laptop off and replaced my laptop battery with my new one from ebay and its working ok
hi..go and try to find the (Control Panel) then double click the icon of name is (Network Connections) then find the wireless LAN connection..if you have wireless connection u need configuration..if not no have wireless connection you need re-install the LAN card driver..Thanks and good luck..^_^
I could not find a breakdown for you laptop. But from a picture I saw on the web, I could tell you that it is probably the same as most laptop. First, there are screws under the round inserts. You need to pry those up and stick the aside ,in order to put them back when you finish.
Then remove the screws, usually 4 on each corner of the screen. Some laptops have 2 screws on top of the screen near the latch.
Then you need to pry the front bezel off the screen. You can use a small straight screw driver. Carefully (as not to scratch the case) insert the screw driver and pry the bezel away from the back casing of the LCD.
Once you have the bezel off you will see the screws that hold the actual LCD screen in, remove them and lift the LCD out. You will have to un-hook the cable from the System board to get the screen completely out. Then install the new screen. Please remember to rate all users who assist you for free :)
The safemode may not be accessable probably because you have the Other Gadgets connected to the comp.
Turn Comp off...
Remove every thing(except Keyboard,mouse,monitor& power.)
Then Keep Tapping F8 to enter "advanced screen options menu".
***If the safemode would not enter then enter the safemode with command Prompt.
***Log on to your computer with an administrator account or with an account that has administrator credentials. *** Type the following command at a command prompt, and then press ENTER: %systemroot%\system32\restore\rstrui.exe if all this do not work and the OS is an OEM then the manufacturer of this computer should have a to Recovery the OS by formatting the comuter.