Question about RCA 25202RE3 Corded Phone

1 Answer

Need to know how to turn off answer feature

Answer Feature

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

How can i remotely forward my phne to another number

Posted on Dec 14, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I turn off the auto attendant on my Norstar M7310?


It depends. Go into feature 983, default pwd of 1020000 for 3-digit extensions. Go into AA, Table, Table 1, and change the option for the AA to N. If you're using a CCR tree, you'll have to go into Table 1 and disable the tree under Morn CCR and all the CCRs that follow.

Mar 03, 2015 | NorStar M7310 Corded Phone

1 Answer

FEATURE BUTTON IS STUCK ON, MUST PUSH ANSWER BUTTON TO ANSWER PHONE CALLS.


with this nec phone. you need to unplug it all . stick a small screwdriver on the feature button to pop it up and off the board (since its stuck) and plug it back in. to reset the phone.,

Mar 17, 2011 | NEC DTH-8D-1 Corded Phone

2 Answers

I push the feature button it turns red as soon as i enter the phone number the light goes out press feature and does not program


Why are you pressing the feature button?

Press feature then answer. You envoked ringing line pick up.
Press feature then speed dial button, dial a number like your dialing out, then feature again. You've just set a speed dial button.
Press feature, then 3 and you've changed your ringtone on a series i phone.

Mar 16, 2010 | NEC Dterm DTP 16D-1 Corded Phone

1 Answer

How do I program the line redirection feature


If you switched phone companies and the feature stopped working you probably had Call Forward Busy/No Answer from AT&T. If you use the call forwarding in the phone it will use two phone lines for the entire length of the call. Call Comcast and have them add Call Forward Busy/No Answer and tell them the number you would like your calls forwarded to and the ring cycle (the number of rings on no answer).

Mar 05, 2010 | Nortel T7316E 2-Line Corded Phone

1 Answer

Feature button stays illumated


If it keeps on blinking, try

feature ->99 ->feature

Aug 26, 2009 | NEC Dterm DTP 16D-1 Corded Phone

1 Answer

We need to use the Lucent Merlin ''all call'' feature


What model phone are you talking on? The manuals will not do you any good if you dont know what system it is.

Jun 16, 2009 | Phones

2 Answers

DO not disturb feature will not turn off


do not pick up the headset
push feature 69 feature

Jan 20, 2009 | NEC Electra Elite DTU 16D-2 Corded Phone

2 Answers

Conference Calls/Transfer


Conference [Feature] [3]

  • Establish a conference call between yourself and two other parties.
1. Make or answer the first call.
2. Put the first call on hold.
3. Make or answer the second call.
4. After the second call is connected, press [Feature] [3].
5. Press the line or intercom button of the first held call.
6. Press [Rls] to end the conference call

  • To remove yourself from a conference permanently (unsupervised conference):
    • Press [Feature] [7] [0]. The other two callers remain connected. (Some external lines may not support this feature.)

May 21, 2008 | NorStar Meridian M7310 Phone

1 Answer

NEC DTU-32D


Have you tried the answer key by itself? Usually feature and answer turns it back off.

Nov 29, 2007 | NEC Electra Elite 32D-1 Corded Phone

Not finding what you are looking for?
RCA 25202RE3 Corded Phone Logo

Related Topics:

134 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Phones Experts

kakima

Level 3 Expert

96683 Answers

yadayada
yadayada

Level 3 Expert

61249 Answers

Cindy Wells

Level 3 Expert

4761 Answers

Are you a RCA Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...