Question about Philips Magnavox 9P6034C 60" Rear Projection Television

1 Answer

Need a remote

I need a remote for 15MF200V/37

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 121 Answers

Servicemanuals.net or get universail.

Posted on Dec 11, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 51pp9100d/37 philips TV doesn't have any sound.


This set has a "small signal board" The board is about 3x5 inches and plugs into board on far left as seen from back of set.

A lot of these fail:

low sound
no sound
intermittant sound
no remote functions
no channel up or down
etc etc

Last time I looked board was around 100 exchange rebuilt

Mar 13, 2012 | Philips Projection Televisions

1 Answer

HOW TO MAKE THE PICTURE BIG ON THE SCREEN FOR PHILIPPS HDTV MODEL SIPP91000/37


Hi

Thanks for using FixYa. You'll need to use the Zoom feature on your remote to make the picture big on the screen.
Please do rate the solution and revert for further assistance.
Thanks
Rylee

Nov 24, 2009 | Philips Projection Televisions

1 Answer

Philips 60pp9100d/37 - remote sensor


Yes it probley got pulled out and since
its a stragler wire ,it would be easy to miss

little trick I use is never dust or vacume
till your done , that way you can see where
somthing was or was not pluged in at that
location

darn gota take it apart again , I know the feeling.

Jun 30, 2009 | Projection Televisions

1 Answer

Re: Sony Bravia remote problems


Hi,
sounds like you need to "autoprogram" your channels. In the customer menu search for "settings" (looks like a toolbox) select that, arrow down to "channels" select that, you'll see option for "autoprogram" select that. Any channel it sees it will lock in and you shouldn't have to press numbers anymore.
Rustym62
http://www.the-tv-dude.typepad.com

Apr 27, 2009 | Projection Televisions

1 Answer

Cant control volume with dish satelite remote


FIRSTLY
  • With the desired equipment on, press and release the Mode button until the light flashes behind the correct mode.
  • Using the tip of a pen or the eraser on a pencil, press the address button.
  • Enter the code (see links to find your code below) on the remote's numbered keypad for the equipment.
  • Press the Address button. If the code entered is valid for the remote, the mode light flashes three times.
  • To verify the code works, try several functions for that equipment. Some codes may provide partial functions or respond differently than the button's titled function. Try the other codes listed for that device until you find one that offers more complete functionality.
wHAT IS THE REMOTE MODEL?

Jan 21, 2009 | Philips 60PP9200D Television

1 Answer

Can't find remote code for my Magnovox TP2783C101 TV, I bought a RCA Universal remote.


If the remote was older stock, it may not have all the codes listed in the user guide.

This site may have some codes not listed:

http://www.thompsontv.com/rcarc.html

If this doesn't help, there are numerous sites listed by Google:

http://www.google.com/search?sourceid=navclient&ie=UTF-8&rls=GGLG,GGLG:2005-37,GGLG:en&q=RCA+%22universal+remote%22+codes

Most 'universal' remotes really aren't all that 'universal.'
We have two sets at home for which no one seems to have codes and one of them won't even program a 'learning remote' which is what you might need.

Jun 30, 2008 | Projection Televisions

2 Answers

I have a flat screen lcd 42 inch model number 37MF321D/37 and the on button just keeps flashing and the remote does nothing?


You have either a bad power supply ( a very common problem) or the inverter board that runs the back - light is bad. The power supply board will have capacitors that are leaking or puffed up looking. Same on the inverter board. If you can get a component leval repair then that is cheaper ... But most techs just replace the board. Not a do it yourself job. Expect a cost of $200.00 to $300.00

Jun 13, 2008 | Projection Televisions

1 Answer

Need replacement remote control for tv model #15MF500T/37


You can get the Phillips Universal Remote at the following link that will control that model. They offer free shipping .
http://servicemanuals.vstore.ca/

Apr 13, 2008 | Projection Televisions

Not finding what you are looking for?
Philips Magnavox 9P6034C 60" Rear Projection Television Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Projection Televisions Experts

matt martin
matt martin

Level 3 Expert

1191 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

The Knight
The Knight

Level 3 Expert

68157 Answers

Are you a Philips Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...