I'm using a trendnet TEW-424ub wireless adaptor to get internet in my computer. Was working fine but 2 days ago there was a power outgage on all neighborhood and when situation was resolved and power came back , no internet. Signal strength is almost 100% but can't get internet.Wireless network connection shows connected and firewalled. What could be the problem ?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You may be fighting an internet connection slowdown or shut down. The modem is looking for that connection and if it falls below a certain speed it shuts off. You might contact your ISP first and see if they are having issue in your area, and you can also test your speed at Speedtest.net. If t he internet is good ,then the modem may be bad and last resort, replace it.
I hope this was useful and please comment if this was helpful to you.
First RESET your router to defaults. for that press RESET button for 10 seconds RESET button is in back side of router. Then connect your router to computer with ethernet cable. Then you can access it with following link. http://192.168.1.1 or http://192.168.0.1 type user as "admin" and password as "admin" or blank or "password" Then you can see configuration page of router. Set WAN settings as your internet service provider settings. Enable DHCP . CLick on wireless and enable wi fi. If you want secure router then enable WEP security then add new code it is your password key for connect wi fi. Let me know if you need further assistance. Thanks.
Sounds like you may be having an issue with software already installed on the laptop to control the wireless connection. Many laptops have preinstalled software for their internal wireless devices. You should consult your manual about configuring and saving passwords for a network for that particular device. Typically you will need to enter the WEP key in the software itself.
HI! all your computer is connected except for one, you are connected to to the local network but cant get an internet connection, I dont see any problem with your wireless connection bcoz you are connected to the lan, check the security settings of your browser on your windows vista, go to internet option and security, lower it down to medium security, so that you can access the internet or try using other browser like firefox or google chrome.. check your firewall settings as well on your windows vista..
Sounds like you need to configure the PC's USB wireless adaptor. The settings must be the same as the router. If you use a WEP password on the other connections then you need to have the same password on the USB wireless adaptor.
I had this same problem. I was going to go ahead and call ATT and ask them to put my modem into bridge mode, but I messed around a bit more....
I went ahead and turn on PPPoE...tried to run the set up again. Well it worked. Not the internet connection is working through the modem. For some reason, the setup changed PPPoE back to DHCP Client, but it's working now. Give this a shot before calling ATT if you like. Good luck.