Question about Belkin (F5D9230-4) Wireless Router (F5D92304)

1 Answer

How to secure my belkin router version 1100uk version

Always shows not seccured

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 827 Answers

Type into the internet browser url box.this is the router's ip address.
it should ask for a username and password. try admin for username and password for password. then check the page it is displaying. this is the settings page for the router. you can change the username and password in there. write it down!
then you could go to your wireless connection list, right click on the connection and press properties. hit the security tab and there should be a line saying security options or something like that (that's what it is in vista) and enable encryption, like WEP, or preferably WPA. there will be a list of available protection methods. i'm not sure but wpa2 might be a good way to go.
hope this helps, good luck.

Posted on Dec 12, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a Belkin N wireless router. It's all set up but it shows as not being secured. How do I secure it? Model F5D8233-4v3

Connect a LAN cable from Belkin to your laptop/computer's LAN port, open a browser on your laptop/computer and enter the Belkin's configuration URL.
The default PW = blank (just press Enter) You can now change the default admin password.
You can now configure the wireless settings to protect your wireless network and Internet from unauthorized access. Now configure the wireless card in your computer/laptop with the router's wireless settings. To secure your wireless network from unauthorized access, please click on this link and follow my instructions :-

Jan 08, 2013 | Belkin Computers & Internet

1 Answer

Where is the network security key located

Unfortunatly there is no way of recovering your password however you can always reset your router.
Keep in mind this will reset the router to factory default and make your router unsecure here is a link to show you how to reset the bottom link is to secure:

Oct 25, 2010 | Belkin (F5D7230-4) Router (587009)

1 Answer

I have a Belkin wireless router but no one can see it

The settings for different wireless routers differ based on the manufacturer. If I could log into your router, I'm sure it would take seconds to diagnose the issue. Since that is not possible, you should know that Belkin will provide support for you. If you will simply call them and they can walk you through the issue.

Feb 25, 2010 | Gateway Belkin 54g Wireless DSL/Cable...

1 Answer

Belkin g wireless modem router f5d7634 always disconnect

try to reduce the MTU settings on your router.
If possible upgrade the firmware of the router.
Click here for more info about the networking

Oct 07, 2009 | Gateway Belkin 54g Wireless DSL/Cable...

2 Answers


u can acess router with following link

type username and password "admin"
or password remain blank

Apr 13, 2009 | Belkin (F5D7231-4) Wireless Router

1 Answer

Belkin N1 wireless router drops offline

The connectivity issue with your Belkin router could be due to a couple of different items. Your ISP might even be able to shed a little light on the subject.

I would also go to Belkin's website, and go to the support area by clicking on Support Center in the left pane of the sight. You can then search for your product number. With the results that you receive, you will be able to see what version of firmware they have, which is like doing a software upgrade on your computer. There should also be a step by step process on the website for you to install the firmware. I would do it from a desktop that is connected physically to the router.

Please let me know if you would like further assistance with this matter. Thank you.

Mar 27, 2009 | Belkin N1 Vision Wireless Router

1 Answer

How can I secure my router Belkin Version ? always show not seccured

If you are connected and up and running, just login to your router from a browser go to and you will be asked for password (default has no password set). If there is a password set then use it if you know it, if you dont then reset the modem by pressing in the reset button at the back of the modem (a hair/paper clip is good for this) keep it held for 10secs and then release, modem should be reset to factory defaults. Once browsing the settings you will be able to secure it with a password.

Dec 11, 2008 | Belkin (F5D9230-4) Wireless Router...

Not finding what you are looking for?
Belkin (F5D9230-4) Wireless Router (F5D92304) Logo

Related Topics:

276 people viewed this question

Ask a Question

Usually answered in minutes!

Top Belkin Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2263 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18413 Answers

Are you a Belkin Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides