Question about Canon PIXMA iP1800 InkJet Photo Printer

2 Answers

Canon ip 1800 refilled ink says ink has run out, it's full

Canon ip 1800
refilled ink
says ink has run out
how to disable ink counter

Posted by on

  • 1 more comment 
  • funwithdouge Dec 11, 2008

    I have been refilling canon printers for years
    The fact is Canoa changed the programing for the 1800 the 1500 allowed you to reset the ink level counter
    this ink cartrage works fin in any of the other canon 1800 printers.
    The new Canon program recognizez the serial number of each individual cartrage and simply rejects the cartrage after a given ammount of time.

    Doug Peters

  • Anonymous Feb 09, 2009

    my printer keep saying catridge not installed properly

  • Anonymous Mar 23, 2014

    refilled ink. need to reset to full on printer

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Here's how to reset the printer so it doesn't give you the out-of-ink message:   1)  Hold down the flashing yellow RESUME button for almost 1 minute 2) Open the cover 3) Release the cartridge(s) (#30 is black, #31 is color), and then reinstall cartridge(s).  Close cover. 4) Turn printer OFF (I had to wait and try this numerous times as green light was flashing & it wouldn't shut off.  Wait, then press OFF again. ) 5) Turn printer back ON, and cheer when it prints.

Posted on Dec 29, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 78 Answers

Funwithdouge,

The fact is that you there is no ink counter in this machine. It is simply the fact that the refill ink is faulty as many of them are. I don't mean to be cheeky, but try putting a genuine cartridge in your printer. You will do your prints and the printer a huge favor and at the same time save your self a mess of head aches. As a canon technician, I can tell you that yours is a very comon story amoung those who choose to use non genuine cartridges, and the fact is that you are really not saving a whole hell of a lot of money by using refills.

Gremlin11

Posted on Dec 11, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Show that ink is finished , but it's not .


Printer "read" ink level counter, not ink level actually. Refillable ink tank read as empty ink. Two methods to resolve this. Reset ink level counter using software. Or disable ink level counter reading.

Jan 26, 2013 | Canon PIXMA MP495 InkJet Printer

2 Answers

Black ink cartridge is full, when printing no black showing


Reset waste ink counter

To reset waste ink counter at printers canon pixma MP150, MP160, MP170, MP180, MP450 and MP460 there any 2 choice, that is :

Start with printer on then run this software
Click Reset Main (main) to reset waste ink counter and then click Reset Platen button (additional)

Or

When you insert a refilled ink cartridge into your Pixma MP500 printer you should get a warning about the refilled cartridge. You should also be prompted, asking if you wish to disable ink level detecting. Agree to do so, and you won't get the warnings again because the ink levels won't be monitored by the printer.

Feb 22, 2011 | Canon PIXMA MP150 All-In-One InkJet...

1 Answer

Canon ip 1800 full tank


Reseter Printer Canon IP1880 To reset manually Ink Full Tank, try these methods :
1. Turn on Printer Canon iP 1880
2. Push and Hold resume button about 2 minutes
3. Release resume button
4. Printer will back in normal again
5. Then use the software.
6. Good Luck friend
7. If you want this permanent, Please Download Reset Tool
ip+1800+service+tools.jpg
8. Reset tool support Canon iP2500, iP 1800, iP 1100

For more details visit the following link
http://indoresetter.blogspot.com/2009/04/reseter-printer-canon-ip1880.html

Feb 09, 2011 | Canon Printers & Copiers

2 Answers

Bland and color cartridges have been refilled but


Ink level counter (program) didn't read actually ink at ink tank. Brand new cartridge ink level counter 100% (full), and ink 100% (about 10 ml). After may printing, ink will dry out, and ink level counter reach zero (ink out). Printer will not allow print anymore, even have refilled, because ink level read "ink out". For canon type, you just to release ink level counter, and counter just stop, but printer will allow to print. Press stop/reset button for about 30 second.

Mar 15, 2010 | Canon PIXMA MP190 All-In-One InkJet...

6 Answers

How to reset pixma ip1980


This is the REAL working method of manually resetting Canon ip1880 - ip 1980.

1. Unplug the POWER cord.
2. Press & hold the power button.
3. Connect the power cord WHILE holding the power button.
4. Keep on holding the power button for about 30 seconds.
5. Release the power button. The printer should be turned off.
6. Turn the printer on and that's it!

NOTE: You have to do this every time you turn on your printer. Or you will get the waste pad full error.

Hope this helps.
vulmec.wordpress.com

Jul 11, 2009 | Canon PIXMA iP1800 InkJet Printer

2 Answers

My Canon IP 1800 cannot recognized the Black ink


It sounds like the electrics on the back of the cartridge have failed, replace with a new cartridge, and away you go.

Jun 06, 2009 | Canon PIXMA iP1800 InkJet Photo Printer

1 Answer

Cannon printer pixma ip 1600 ink absorber full


Dear khalid,
To fix this problem you need to reset waste ink counter of the printer by using General Tools for Canon ip1200 series (General Tools for ip1300 & 1800 series also works on this printer)
Perform following step to reset waste ink counter:
  • Enter service mode:
-Plug in power cable while holding power button.
-Press RESUME button twice
  • Connect USB cable (you may also connect USB cable before entering service mode, no problem).
  • Run General Tool
  • Select USB port
  • Click waste ink counter: Main & Platen
  • Turn off the printer then turn on and run your printer as usual.
I think it will be more helpful with picture enclose. For I cannot insert image more than 150 kb here, I suggest you to visit Canon Inkjet Printer Forum. I have discussed this topic before.
Please rate me.
Regards,

Nov 26, 2008 | Canon PIXMA iP1600 Printer

1 Answer

My cannon printer pixma ip1800 cannot detect ink pls help me...


If after you install the cartridge you get a yellow light and error message:
“The following may have run out of color. The function for
detecting the remaining ink level will be disabled since the
ink level cannot be correctly detected. If you want to
continue printing with out this function, press the printer’s
start button. Canon recommends using new genuine Canon
cartridges in order to obtain optimum quality.”


Do not click “cancel printing”. Press printer start button
to start printing. This action will bypass the ink level
detection from the recycled cartridge. It will not damage the
printer! With a recycled cartridge this action needs to be
done one time.
A full recycled cartridge ink level may not display correctly.
It may show empty.
If you want to check the ink level, you can do a “Nozzle
check” by follow the directions below:
Go to menu File select print click on “Property” click
on “Maintenance”
Click on “Nozzle check” to print out the color check.
Click on “Cartridge Alignment” to align the cartridge.

See pictures for above process at Inktelligent ip 1800 topic

Also the refills refered to above are at the IP 1800 inkfilling page

Sep 23, 2008 | Canon PIXMA iP1800 InkJet Photo Printer

1 Answer

Error messages: U150 + Ink tank errors have occured


ON THE CHIPS, TRY CLEANING THEM WITH ALCOHOL (70%)

SOME BRANDS YOU CAN SHAKE THE CARTRDGES TO RESET THE INK COUNTER

Feb 21, 2008 | Canon Pixma MP500 All-In-One InkJet...

9 Answers

The ink absorber is full for pixma 1880


This is the REAL working method of manually resetting Canon ip1880 - ip 1980.

1. Unplug the POWER cord.
2. Press & hold the power button.
3. Connect the power cord WHILE holding the power button.
4. Keep on holding the power button for about 30 seconds.
5. Release the power button. The printer should be turned off.
6. Turn the printer on and that's it!

NOTE: You have to do this every time you turn on your printer. Or you will get the waste pad full error.

Hope this helps.
vulmec.wordpress.com

Jan 15, 2008 | Printers & Copiers

Not finding what you are looking for?
Canon PIXMA  iP1800 InkJet Photo Printer Logo

662 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Printers & Copiers Experts

kakima

Level 3 Expert

96627 Answers

old marine
old marine

Level 3 Expert

1476 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Canon Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...