Printer cartridge error message for office jet 5510 printer

If it copies ok, then the issue is either the way it is cabled to computer or the print driver software settings on pc.... How is it connected via USB? Check port and correct driver is in windows/control panel/printers. Reinstall.

Here is the link to download a copy of the manual for the HP 5510 All-in-One Office Jet Thermal Printer at HP.com:

http://h10025.www1.hp.com/ewfrf/wc/manualCategory?lc=en&dlc=en&cc=us&product=311255&

Step-by step instructions along with illustrations on how to replace the print cartridge is found on p. 63

Hi

you need to replace your cartridges
one of it will stop printing and a message will come in
you monitor "cartridge error" and it must be replaced


In case I had help you pls vote me

the print head the the cartridge sits in might need to be pushed in

It sounds like the jets on your cartridge is plugged. I have unplugged some cartridges by soaking the jets in alcohol. I pour some alcohol in a shallow dish and set the cartridge in it with printing jets down. Leave it for 5-10 minutes. If the jets start to unclog you will see the ink discolor the alcohol.

Be careful when wiping off the ink jets so you don't damage them. Use a soft cloth. Try the cartridge and see if it prints. If you need to soak it longer.

Look on the right side where the cartridge goes, if the spring on the right is hanging loose it might have poked a hole in the ribbon cable at the rear near the contacts. If so it's time for a new printer, if OK, check the exp. date on the ink cartridge and if it's been refilled or a generic ink you may just need another one.

You did take the protective film off the new cartridge, correct?, could also be the contacts that recognize the cartridge ae dirty, also, try unplugging the power cord on the printer and plug back in to reset

Hi There follow the link bellow for the hp site & manual

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c00033418

Regards Al "alstech"

Are you sure you installed the ink cartridges correctly? They should snap in and then you should be able to do a Printer Test/Align cartridges function. 
Which error message is it putting out? 

i have an hp office jet 5510 and its not print and it keep on saying cartiage is jam , the timeing is all mess up the leg that bring the paper out keep on coming up whilethe cartiage is going across is there a way of reset the print to get back the timeing