Question about Nikon FM10 35mm SLR Camera

1 Answer

Nikon fm10 35mm SLR developed pictures turn out white

I have developed two rolls of film and they have all developed white and have changed the shutter speed and am wondering what else i can do to make it work right?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 55 Answers

That sounds like your shutter isn't opening. take the lens of and set the shutter speed to B this should keep the shutter open as long as the release is pushed down. advance one frame and hold down the shutter release while looking at the opening where the lens should be. If the shutter opens you will hear it and see the back plane where the film would sit to be exposed. I expect your shutter won't open.

Good luck
Rob

Posted on Dec 11, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Blank Film Developing


kwilson36

you should have at least 6in. of exposed film from the film canister to the take-up spool unless you loaded the film in total darkness.
open the back cover to make sure the shutter is working, reload and give it another try.

Jan 25, 2009 | Nikon N90S 35mm SLR Camera

1 Answer

2 rolls out of a 3-pack ruined.


I would suggest you buy an off-brand roll of 12 or 24 exposures. Run it through the camera taking snaps of anything -- but make sure you vary the lighting, ISO, shutter speed, aperture, etc. as you snap the pics. Don't worry too much about composition. This roll is a quick test, NOT for photos to keep.

Have the film developed and then follow-up with comments on the results. I'll gladly assist you further at that time.
Char1ieJ

Nov 11, 2008 | Nikon N65 35mm SLR Camera

2 Answers

Changing lens


Your Nikon is a SLR which stands for single lens reflex. The reflex part is the way the mirror that lets you look through the lens to frame the picture flips up to let the light go straight to the film. You can change the lens half way through the film roll because the mirror is down while you change the film and blocks light from getting to the film, just as it blocks the light until you push the shutter button. Have fun with your 'new' camera! I use an even older style Nikon FE2. I like my Nikon 55mm macro lens but your newer camera takes autofocus lenses so you'll need advice from someone else for that.

Oct 01, 2008 | Nikon F65 35mm SLR Camera

1 Answer

Film is not developing


It's hard to tell without looking at the film itself, and it would help to know what type of film you are using (black and white? color?). My guess would be a light leak. If the film is exposed to any light, that results in a black picture, possibly blotches of color. Either you opened the camera before you rolled the film back into the canister (unlikely), or your camera is responsible for the light leak, in which case, you will have to bring it to a repair shop.

Mar 24, 2008 | Pentax ZX-50 35mm SLR Camera

1 Answer

Film doesn't develop


check your camer without film:

1). open the back, use different combinations of film speeds, shutter speeds and apartures. if you can see light coming in from the lens, no matter how little light and how fast.
2). check that film advances or not. if you camera detects film and loads automatically, insert any expired film cassette, or badly developed film and roll it back into cassette.
3). send it for service if either one or both gives you an answer of "N".

Jan 07, 2008 | Nikon N55 35mm SLR Camera

2 Answers

Developing pictures


depending on the type of film you are using and where you are taking it could be the problem. if you are using professional film and taking it to a pharmacy to get developed, the chemicals used at these places will erase the images off the film and appear as if the film is blank.

Nov 11, 2007 | Nikon N75 35mm SLR Camera

1 Answer

Bad picture developing


Since this happened on two seperate rolls of film, the problem may be that the shutter blades have been bent out of place.  This can cause the symptoms you describe.  Have a qualified technician look at the shutter.  Usually the blades can be reset.  In bad cases the blades may be bent or creased. If this is the case, the shutter may need to be replaced.

Oct 23, 2007 | Nikon N55 35mm SLR Camera

1 Answer

My negatives are turning out clear.


"Clear" = no exposure, right? Two possibilities: light not getting in; or film not advancing. To check the former, take a "picture" with the camera open at the back. See the light through the lens? Yes = OK, No = there is a problem with the shutter. Most likely the film is not advancing. Here's a test. Load the camera with a roll of film and take one picture. Open the camera and see if film moved. If not, go read the manual to make sure you are loading it properly.

Jan 28, 2007 | Nikon N75 35mm SLR Camera

2 Answers

N75 will not load film


Quick solution: force a manual rewind.
1. Remove film
2. Close camera back.
3. With the power turned on, press the two rewind buttons together. They are marked in red.
4. The camera will make a rewind sound and will stop after about 2 seconds.
5. DO NOT fire the shutter yet.
6. Put the mode on Manual and select a fast shutter speed like 1/90 sec. Any aperture will do.
7. Load the film correctly as given in the user's manual.
8. As you close the camera back, the film will prewind to the end of roll. At the end of the roll pre-wind the LCD will show you the total number of frames available.
9. Select any shooting mode.
10. Go on and take pictures.

Hope this helps

Dec 14, 2006 | Nikon N75 35mm SLR Camera

Not finding what you are looking for?
Nikon FM10 35mm SLR Camera Logo

Related Topics:

217 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nikon Photography Experts

kakima

Level 3 Expert

102366 Answers

Ric Donato

Level 2 Expert

225 Answers

Bart Pulverman

Level 2 Expert

362 Answers

Are you a Nikon Photography Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...