Question about Washing Machines

3 Answers

My front end loader washer keeps saying e10 error

Posted by on

  • bbygrl_schwa Jan 04, 2009

    My front load washer keeps flahing e10

  • Cody Zimmerman
    Cody Zimmerman May 11, 2010

    what kind of washer is it?

×

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 373 Answers

E10- Problems with water drain during washing
-Drain hose kinked, filter blocked, drain pump, water distributor, wiring , main PCB, pressure switches


Usually due to debris trapped in the drain pump (pebbles/coins/hairgrips etc) jamming it. Clean it all out including all pipes.

Please rate fixya if we could solve your problem.thank you.

Posted on Dec 11, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

We bought this beauty used, $400 for the W/D pair ~4 yrs old. First run attempt, after loading the laundry and all modes automatically set for perm press, the drum would slowly turn for ~20 sec and stop. Then rotate again and stop. After about 5 minutes, "E10" in the display...forgot to turn on the H & C water so after I connected the new stainless steel hoses with water on, E10 gone! Washed great!

Posted on Apr 09, 2010

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had the same problem and all i did to fix it was take the hose out of the floor drain and put it in the sink. now my washer works fine

Posted on Apr 01, 2009

1 Suggested Answer

techbuster
  • 5081 Answers

SOURCE: i have a frigidaire gallery

E10 means that your cold water is coming in too slow, disconnect the cold water hose and check to see if the screen on your washing machine is clogged. If the screen is clean and the hose has good pressure then you will need to replace the water valve on your machine--- this is the piece that the hoses directly connect to.

Posted on Sep 15, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My washing machine keeps stopping during its washing cycle and says fault E10


Thank you for your inquiry, Barbara Constable!
I see that your Electrolux washer is displaying an "E10" error code. "E10" stands for fill time too long you may want to check the hoses to make sure they are not restricted or kinked this could cause slow fill within your washer. If the hoses look to be in good shape then I would suggest it could be a faulty sensor or control panel. You could additionally reset your washer by disconnecting power from it for ten minutes. If you restore power and it continues to flash "E10" I would recommend having a professional out to properly diagnosis your washer. Hopefully this information is helpful. -Matt

Dec 21, 2014 | Electrolux Washing Machines

1 Answer

I have a frigidaire gallery series front loader washing machine and when I am washing it says e10 what does e10 mean


it means you have a problem with the water supply. start by takeing off the hoses and cleaning the inlet screens on the washer with old tooth brush. I have to do this about every two or three months on mine because of it getting clogged.

Mar 24, 2014 | Washing Machines

1 Answer

Error e 12 frigadaire front end loader washer


Hello paversa971 - Are you certain the error code is E12? This manufacturer does not have any E12 error code for washers. Could it possibly be E10 or E11? If so, washer may be experiencing a water fill issue.

Dec 14, 2012 | Frigidaire ATF6000ES Front Load Washer

1 Answer

I have a frigidaire gallery series front loader washer model gltf2940e it keeps giving error e10 what do i do


E10 means that your cold water is coming in too slow, disconnect the cold water hose and check to see if the screen on your washing machine is clogged. If the screen is clean and the hose has good pressure then you will need to replace the water valve on your machine--- this is the piece that the hoses directly connect to.

Sep 15, 2010 | Frigidaire ATF6000ES Front Load Washer

1 Answer

My front loader is not working whirlpool


1 Beep/E10--Error: Water doesn't enter Cause: Water supply problem, Check kinks and faucets
1 Beep/E10--Error: Water leaks Cause: Water connections loose,household drain clog,oversudsing. Correct problems.
1 Beep/E10--Error: Dispenser drawer is open Cause: Washer will not operate if drawer is open.
2 Beeps/E20--Error: Water dosen't drain. Cause: Drain is kinked or household clog. Correct.
3 Beeps/E30--Error: Drum overfilled. Cause: Inlet valve,pressure switch or control board failure.Select drain/spin to remove water. Restart.
4 Beeps/E40--Error: Door is open. Cause: Washer will not operate if door is open. Close door.
5 Beeps/E50--Error: Motor is overheated. Cause: Wait 30 minutes to cool down. Restart.
7 Beeps/E70--Error: Cold water doesn't enter. Cause: Hoses crossed,faucet problem.
15 Beeps/EF0--Error: Oversudsing. Cause: Too much detergent,or improper detergent for machine.
15 Beeps/EF0--Error: Hot water doesn't enter. Cause: Hoses crossed,faucet problem.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Jul 01, 2010 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

I keep getting an E1 Error code on my Whirlpool Duet dryer. Technician came and didn't fix it. Any suggestions?


1 Beep/E10--Error: Water doesn't enter Cause: Water supply problem, Check kinks and faucets
1 Beep/E10--Error: Water leaks Cause: Water connections loose,household drain clog,oversudsing. Correct problems.
1 Beep/E10--Error: Dispenser drawer is open Cause: Washer will not operate if drawer is open.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Aug 15, 2009 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

E10 error code. I have to keep hitting the start


hi

it is water pump error ,,please check it thank u,,

please rate it

Jul 04, 2009 | Frigidaire GLTF2940ES Front Load Washer

1 Answer

My washer is giving error code e10 and im not sure what to do my washer is a frigidaire front load


I have an error code chart that came with mine and it says a few different things for E10. 1st says water not entering washer. 2nd says water leaks. 3rd soap dispenser drawer is open. In another post there was something about a magnet needed in the drawer too. But I would suggest checking your hoses and making sure you have water and the drawer is completly closed.

Jan 18, 2009 | Frigidaire ATF6000ES Front Load Washer

1 Answer

I have a Fridgidaire Front Loader Washer _ Affinity. It has an error message flashing. E10. What does that mean? What do I do to fix it?


I have a Fridgidaire Front Loader Washer _ Affinity that flashed the E10 error code. I also had the problem with the fabric softener dispenser not emptying, and staying full of water. The problem was the cold water filter on the back of the washing machine that was semi-plugged. Cleaned the filter and now works perfectly. My machine is no longer flashing the Error code 10. The dispenser works perfectly.

Oct 05, 2008 | Frigidaire Affinity ATF7000ES Front Load...

1 Answer

E10 error with NEW front loader fridgidaire


Are you sure that water fills the tub ? Close the hot water tap and check if cold water fills in, then close the cold water tap and open the hot water one and check whether hot water fills in. Let me knw with your test results.

Aug 12, 2007 | Frigidaire ATF6000ES Front Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

1,580 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...