My dvd player note "nodisc" when i have a disc in the player

I bought one dvd player
but it is not recognizing th disc (Nodisc)
can you help me , i am from india ,Karnataka yallapur

hello there soenensistva
Well first of all Compact discs are easy to be read by a DVD player then ordinary Cd player cause of their lens are made for more compressed Data discs..there for try some of the options

1. make sure that the disc Surface is Clean and don't have finger prints or any other material that is disturbing the the read process between the CD and lens present inside CD player

2.if your CD is precious for you ( that consist some important Data you may need ) then try a DVD player for that

3.if both things doesn't work try a cleaning Cd for Cleaning the Head of CD player .

i wish that your problem may be solved
Best Regards

Loading may mean it is not seeing the disc---A dirty or bad optical pickup is possible if you get this error with every disc.

The DVD player's laser pickup assembly is intermittent and since it is brand new and under warranty take it back for replacement. There should be no issue with your TV set.

Good day to you!!

Did you try to check if the disc have many scratch?please check it then replace it or try another kind of disc (original) if possible so we can find out where the problem is, in the disc or in the DVD itself..

for comments or question please feel free to click the " ADD A COMMENT " below

If this suggestion helps you please don't forget to rate or have a testimonial with me...

Thank you for using FixYa!!!

1. Power on your player with no disc in the tray
2. Press REPEAT for 5 seconds
3. Enter the corresponding combination for your current RC (see top of the page)
4. Current RC should be displayed
5. Press the button for the desired RC (9=multi-region)
6. (Press OPEN)
Power off your player

Hi,
Please follow the steps : To change the player region code
1. Be sure players drive is empty (nodISC)
2. Enter following key sequence using remote control:

Enter, 6, >=10, <<, 00F2, Audio, 8, * requested region code here (1-8) *, Subtitle, 1

3. Player will reset and requested region code will be set.
- For example to set region code to 3 press: "Enter, 6, >=10, <<, 00F2, Audio, 8, 3, Subtitle, 1"

To set the player to RCE proof region free
1. Be sure players drive is empty (nodISC)
2. Enter following key sequence using remote control:

Enter, 6, >=10, <<, 00F2, Audio, 8, 1, Subtitle, 4

3. Player will reset and set to "region-free" and "RCE-free" mode

To restore players factory region code
1. Be sure players drive is empty (nodISC)
2. Enter following key sequence using remote control:

Enter, 6, >=10, <<, 00F2, Audio, 8, 9, Subtitle, 1

3. Player will reset and set to factory region code

Probably dirty pick up lens.
Get a lens cleaning disc and run that and see if that cures problem.

---

Please dont forget to vote this answer was helpful

Many thanks

------

Hi there,

Did you try to test it and play another using another disc?

You may try to clean the optical lens of the unit using a optical disc cleaner available on any electronic shop, it seems that the drive lens is dirty and can't recognize the disc inserted.

Hope this helps.

micro

check & clean the lens.