Question about Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Problem with my washer

We are getting the F71 code what does that mean ?

Posted by on

  • judy zangrilli Jan 19, 2009

    my duet model is wfw9400sw00 but i'm getting the same error every now and then. f71 not listed as an error in manuel. seems alot of people have this but no one knows how to correct short of replacing board.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

I have a GHW9100LW1 model washer and discoverd that if you remove the front bottom cover three screws there was a tech sheet mounted on the right hand side in plastic this sheet has all the error code explanations maybe that yours has a copy in it also.

Posted on Dec 11, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What does error code f71 mean?


F71 means it is an Central Control Unit(CCU) communication failure.

http://www.fixya.com/support/r6709094-whirlpool_duet_f70_f71_error_codes


There is an detailed article by one of our senior experts in the above link.. Kindly look into the same.

Mar 03, 2011 | Kenmore Elite 45986 Front Load Washer

1 Answer

My washer is not operating properly. please tell me what code F71 means and how to fix the problem. Thank you.


Hi,

F71 points at a connection error between button pad and control board.

Please read the indications in this article: F70 and F71 are two logic board error codes...

Regards.

Dec 11, 2010 | Kenmore 47081 Front Load Washer

1 Answer

Getting code F70 and F71.


Hi.

Please read the tip below, explaining how to fix F70 and F71 problems. The comment applies to Whirlpool Duet washers like the one in question.

F70 and F71 are two logic board error codes that point at a communication error between the main log...

Regards.

Ginko.

Oct 28, 2010 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

What does F71 mean ? This comes up half way through the cycle


Hi,

F71 points at a connection error between button pad and control board.

Please read the indications in this article: F70 and F71 are two logic board error codes...

Regards.

Oct 20, 2010 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

I got an F70 code . After unplugging the machine and then plugging it back in, I now get an F71 code. What to do?


Hi.

Please read the tip below, explaining how to fix F70 and F71 problems. The comment applies to Whirlpool built kenmore washers like the one in question.

F70 and F71 are two logic board error codes that point at a communication error between the main log...

Regards.

Ginko.

Oct 16, 2010 | Kenmore Elite HE5t Washer

1 Answer

Error code shows F71. door is locked and there are clothes in there soaking in water that I need to get out!! what does F71 mean and how do if solve the problem


Hi.

Sorry for the late reply.

F71 points at a connection error between button pad and control board.

Please read the indications in this article: F70 and F71 are two logic board error codes...

If you get similar problems in the future, and machine gets stuck in error mode with clothes inside, empty water from tub disconnecting the drain filter, located behind a panel in front lower side of appliance. After emptying water the door will normally get opened.

Regards.

Sep 13, 2010 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Getting code f70 & f71 washer will not run water does not fill or spin


Hi.

Please read the tip below, explaining how to fix F70 and F71 problems. The comment applies to Whirlpool built kenmore washers like the one in question.

F70 and F71 are two logic board error codes that point at a communication error between the main log...

Regards.

Ginko.

Jun 06, 2010 | Kenmore 47081 Front Load Washer

1 Answer

Error code F71 f71 error code comes up. What does it mean? I'm not sure when it happens during cycle.


It seems the only solution any one has is to pull the plug. If this doesn't solve problem replace board. Seems to me if so many people have this same problem with fairly new washers its a design flaw and should be addressed by whirlpool. $600 for a new board seems outrageous for a new washer.

Jan 19, 2009 | Whirlpool Gold Duet GHW9400P 3.8 Cu. Ft....

1 Answer

ERROR CODE F71


The following list of codes indicates an electronics communication problem with the washer:
Duet HT® washer - F01, F03, F06, F11, F23, F24, F27, F28, F29, F30, F31, F32, F35, F42, F61, F62, F63, F64, F65, F70, F71, and F99
Duet® washer - F05, F07, F09, F10, F11, F13, F14, F15, F21, F22, and FdU
Duet SportTM washer - F01, F11, F23, F24, F27, F28, F29, F30, F31, and F33

To remove the error display, press Pause/Cancel twice.
hcz_003_web_env1.gif
If Pause/Cancel does not work:
  1. Unplug washer or disconnect power for one minute.
  2. Plug in washer or reconnect power.
  3. Re-select the cycle and press Start.
NOTE: If the error remains on the display, call for service.

Dec 11, 2008 | Whirlpool Duet GHW9150P Front Load Washer

Not finding what you are looking for?
Whirlpool Duet GHW9150P Front Load Washer Logo

477 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...