Question about InFocus IN24 Multimedia Projector

3 Answers

Projector has no power

My projector has no power

Posted by on

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,236 Answers

If you have no leds lit, the power supply could be bad. there is a fuse on it that you could check.

Posted on Aug 04, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 82 Answers

Please check out fixmyprojector.com

this unit most likely has internal issues that are not designed for consumers to fix.

Posted on Jul 26, 2009

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 32 Answers

Switch power on

Posted on Jul 10, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does my Dell 1510X Projector not shut off when I push the off button ?


This projector as with most high power projectors will have a cool down period for the lamp once the power button is pushed from on to off. For this model, the cool down period is 120 seconds after which the unit will fully power down. You can override this cool down period by pushing and holding the power button for 1 seconds. If you use this procedure though, you should not power up the projector again for at least 60 seconds to allow the internal temperatures to stabilize.

Feb 27, 2015 | Dell 1510X Projector Projector

1 Answer

My viewSonic PJD6241 Projector Model VS12476 DLP is not connected by power


1,is the power line is OK?
2,if the power line is ok, it means that the projector is defective
3,the mainboard or main power of the projector is defective?

Feb 09, 2014 | ViewSonic PJD6241 3D DLP Projector

1 Answer

Runco CL710 projector. Had power outage and projector won't turn on. Project was plugged into surge protector. Surge protector is working, green light is on. Checked all electrical breakers, they are...


The capacitors on the power supply need to be replaced. When you take apart the projector, and then remove the power supply (it's the section that the power cord goes to) and open it up. Look for the little can capacitors and see if any of them are bulging on top. That is the sign that they've blown. Replace the big ones (about 5) for about $5 in parts. Reassemble and test by turning it on. Search for YouTube video for this.

Aug 25, 2013 | Runco CL-410 Multimedia Projector

1 Answer

Projector posted error, "replace bulb" Projector


Your projector need replacement of lamp unit if you don't want yet you just reset the lamp counter

procedure:
Power on projector
press MENU key
Press right arrow key to select Option
Press down arrow key to select lamp Hours
Press and hold down the ENTER key 5 second (lamp hour counter show red)
press POWER button to turns off the projector
now you power on your projector and no error displaed and no itself turn off after 15 minutes

Apr 13, 2011 | Panasonic PT-L785U Multimedia Projector

1 Answer

This projector was given to me by a friend. The control buttons on the top of the projector do not seem to work. The projector seems to work fine otherwise. Any idea what the problem could be?


The projector was in security mode B which lock all of the projectors controls. I found the solution to this problem in an online manual for the projector. The solution is this button sequence: power-- enter-- power--enter-- power--- enter-- menu. This sequence unlocks the projector controls by resetting the security password.

Dec 17, 2009 | Sharp Notevision PG-M20X Multimedia...

1 Answer

Projector powers down and re starts over and over


the colorwheel, the ballast, or the power supply are not working properly.

Apr 16, 2009 | Eiki LC-XB20 Projector Multimedia...

1 Answer

PROJECTOR WILL NOT POWER ON


1-bad power cable 2-blown fuse 3-defective power supply.4-serious trouble in main board.

Mar 06, 2008 | Toshiba TDP-MT200 Multimedia Projector

2 Answers

Projector


Other than the usual stuff (power cord etc.), check that the lamp cover (not the lens cover) is securely covered. There's a safety mechanism preventing projectors from powering up if it isn't.

Jan 13, 2008 | Panasonic PT-AE700U Multimedia Projector

2 Answers

LCD shutting off automatically


Hi there

Check if your blowerfan that cools the lamp - sits in front of Projector is running.

Nov 06, 2007 | BenQ PB2140 Multimedia Projector

Not finding what you are looking for?
InFocus IN24 Multimedia Projector Logo

Related Topics:

490 people viewed this question

Ask a Question

Usually answered in minutes!

Top InFocus Multimedia Projectors Experts

Juan Carlos Pacheco

Level 1 Expert

36 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

5612 Answers

Are you an InFocus Multimedia Projector Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...