Asus P5B - 965 Intel ChipSet Win XP Sp2 Running in both the HDD of 160 GB each. When I connect it separately both of them run well. But when I run togathe with an option to boot from one,the system restarts and restarts ............always. Please help me
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
dont support sata devices
and this is common problem
that if unsupported device is forcefully bieng tried to work its goona happen
sata support started from865 chipset
u are lucky that ur hdd is getting detecting
A new Os (XP) will allow the second drive even if the old one will not. Of course you can always add a USB hard drive and a USB PCI card to make it all work. What are you using this pc for seems a little old for todays applications. Suggestion If your going to use this that you Replace the main hard drive with a 120GB or larger, new video card at least 256MB if not 512 and at least 1 gig of memory as I believe it will only take a max of 1 gig. you cannot use vista as it requires more resources than this Pc can give to support the OS. you may want to try XP LITE as well one you get XP installed to speed it up a bit!
check the bios settings first. if you can see your sata hdd and dvd rom drive then you can install it with no problem. or else try to replace the cables of the hdd if the hdd is not showing up in the bios. also check that the hdd is set to master drive and dvd also set to master as they are on different connections.
hi im josh in cebu phils. it is very simple frnd. you try to install windoxs xp sp2 or sp3 so that you will not need to install driver for sound. or just get an update of your xp professional. good luck!
Hi rafiqbrush, let me go over a few things for the P5B MB. There is a total of 5 serial ATA SATA drive ports on the board & one ATA IDE/PATA port. The 4 main SATA ports are numbered, 1 - 4. Your primary SATA drive must be connected to SATA port 1. Your second SATA drive must be connected to SATA port 3. See page 2-26 in your manual. All SATA drives are seen as master drives. Once the two SATA drives are connected (As per manual), boot to the bios main menu. At the main bios menu make sure your bios shows both SATA drives. Than go to the bios title "Boot". Make sure your primary SATA drive 1 is listed in the boot order. Save & exit the bios. (SATA drive 1 must have windows installed on it). Link to Asus P5B web site; http://support.asus.com/download/download.aspx?modelname=P5B&SLanguage=en-us
Good luck rafiqbrush! Thank you for using fixya. Mike
make sure the jumper on the hard drive has 1 set to master and the 2nd one to slave. or set them both to cable select. i bet you have them both set to master and thats why it only boots when you have just one hooked up
you need to go in bios and set sata to legacy for no F6 driver. if its on native it need a driver from floppy on xp cd boot . if its not detected in windowws as a slave. u need to run diskmgmt.msc and fin the unalocated drive and create part then format it ntfs
Check the SATA/RAID controller setting.
It could have been set to [Disabled]
Refer to your user?s manual for a detailed description on how to enable the onboard SATA/RAID controller by adjusting the jumper or BIOS settings.