Question about Samsung HP-R5072 50 in. Plasma HDTV

1 Answer

50" Samsung Plasma HP-R5072

Hello! I posted a problem a couple nights ago, but I should prolly ask this first, before I get to the black screen issue. The TV, 50" Samsung Plasma HP-R5072, has been stored on its side for 9 days now (power disconnected, of course). Its laying vertically against the wall, as to not put all the weight on the speakers attached to the bottom. I have read that doing this will not kill the TV, but that when I go to turn it on next, I should lay it standing horizontally (as it would be displayed on a wall) for 24 hours or so before turning it back on, to let the gas all spread out. Is this true? Or have I killed the TV? Or do I not need to wait at all? Please advise all you tech gurus! Thanks a lot!

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 21 Answers

It is a myth about how the tv is positioned, if you have audio but no video then it is probably the y-main bopard or the y-scan board, if you replace the y-scan buffer then you have to replace the y-main at the same time, if the tv is in warranty call 1-800-samsung

Posted on Dec 28, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is zsus board located


Samsung 50 Plasma Parts ' eBay

www.ebay.com/bhp/samsung-50-plasma-parts

eBayFind great deals on eBay for Samsung 50 Plasma Parts in TV Boards, Parts and ...Samsung 50" PN50C430 LJ92-01728A Plasma Y-Main YSUS Board Unit Motherboard.... Part Number: LJ92-01705C (Partial PBA number (705C) can be found on a ...Samsung HP-R5072 50" Plasma HDTV Main Board BN41-00632A ...

Samsung Buffer Board Test and repair Part 1 - YouTube

? 11:20
https://www.youtube.com/watch?v=5hVi5gd0aec
Oct 5, 2010 - Uploaded by z28r2fast4u
I checked two buffer boards and found 11 out of the 12 ic's bad.... my samsung, I post the video here, do you know how to test YMAIN and ZSUS ? .... Samsung PN50C450 with a bad Plasma Panel Shows how to replace the ...

Jan 18, 2016 | Samsung HP-R5072 50 in. Plasma HDTV

1 Answer

Where is Zeus board located


Samsung HP-R5072 50 in. Plasma HDTV Board ysus lg ...

www.fixya.com > ... > Samsung HP-R5072 50 in. Plasma HDTV
Samsung HP-R5072 50 in. ... LG 50PX1D, YSUS and ZSUS board replacement ... andZSUS boards and have found conflicting information. So... YSUS = .

Samsung HP-R5072 50 in. Plasma HDTV Ysus - Questions ...

www.fixya.com > ... > Samsung HP-R5072 50 in. Plasma HDTV
LG 50PX1D, YSUS and ZSUS board replacement 1. ... right away I found a bad fuse on the ysus board and replaced it. if i unplug ysus board the unit stays on.

Jan 18, 2016 | Samsung Flat Panel Televisions

1 Answer

I have 2 vertical black line in the left botton, space by an inch and they are going un to mid screen


Hi.

It is probably a defective buffer board. In that case the lines will be positioned in correspondence of the buffer board connection to plasma panel. In less frequent cases the problem can also be a defective plasma panel. There are more faults that can cause the problem. The TV must be tested.

Here parts for this set: Samsung HP-R5072 shopjimmy.

Regards.

Ginko.

Dec 06, 2010 | Samsung HP-R5072 50 in. Plasma HDTV

1 Answer

HP-R5072 50 in. HDTV Plasma Television: i have one red dot on plasma screen. it is always ...


Unless you see more red dots, this kind of "defect" is under specifications for this size of PDP, if you do not like it, the PDP module must be changed

May 17, 2010 | Samsung HP-R5072 50 in. Plasma HDTV

1 Answer

Samsung 50' Plasma HP-R5072


if it is in warranty, call 1-800-samsung for service, if the tv has backlights, then it could be the power supply or main board, if it does not have backlights then its probably the inverter board or T-con booard

Dec 09, 2008 | Samsung HP-R5072 50 in. Plasma HDTV

1 Answer

Samsung HP-R5072 50' Plasma. Has sound, but no picture.


the Y-main board is going out, or the Y-scan buffer, but probably the Y-main

Dec 09, 2008 | Samsung HP-R5072 50 in. Plasma HDTV

1 Answer

Samsung Plasma 42" TV - 2006


Hi, this is quite a common problem for plasma screens and LCD screens. The fluroscent backlight is more than likely faulty and would need replacing. The best thing to do is to take it to a service centre because there are no user servicable parts inside the plasma.

Nov 01, 2008 | Samsung HP-R5072 50 in. Plasma HDTV

1 Answer

HP-R5072 50in.


If the band is vertical in nature and it goes from top to bottom then you might just have a bad address board. This requires a technician to look at it and replace it.

Jun 17, 2008 | Samsung HP-R5072 50 in. Plasma HDTV

2 Answers

Black out on screen


could be the plasma screen itself or the Y-main board along with the Y-scan buffers

Jun 15, 2008 | Samsung HP-R5072 50 in. Plasma HDTV

Not finding what you are looking for?
Samsung HP-R5072 50 in. Plasma HDTV Logo

138 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Flat Panel Televisions Experts

xxxxxx xxx

Level 3 Expert

4706 Answers

Steve McIntosh

Level 1 Expert

11 Answers

Boo to u

Level 1 Expert

28 Answers

Are you a Samsung Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...