Question about Toys

2 Answers

My gemmy light show box keeps popping the fuse

We've had it for 2 weeks now, the first night we hooked it up it blew, replaced it and it keeps popping. What am i doing wrong? or do i have a defective box?

Posted by on

  • Anonymous Dec 14, 2008

    yup same problem

  • armidadallas Dec 14, 2008

    what kind of fuse did you buy, I think I am missing the fuse completly. All I get is a buzzing noise in the speakers.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Go to planetchristmas.com there are SO many knowledgeable people there. There are forums just for the Gemmy and I suspect you are exceeding too many amps per outlet. But read the forums, you will find your answer and more. Do a search for "Gemmy", Jason Rose has alot of info for this.

Posted on Dec 28, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

No, I have a problem. Speaker hums, but no lights or sound

Posted on Nov 28, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ignition feed fuse 16 blows when i turn on the key


Hi,
You have a 'short circuit' in the system or a bad ground somewhere. Go online and search on the Dodge/Plymouth/Chrysler forums for this issue. I've read about myself but don't recall the common cause.

GL,
Td

Oct 03, 2012 | Plymouth Voyager Cars & Trucks

1 Answer

Where to start looking for a short in a 1992 ford ranger. keeps blowing the fuse that runs the dash lights and the tail lights ..first it blew .i replaced .was fine till next night .turned on lights...


connector under the truck, near the trans
cannot remember specifics at this time but remember starting there every time one cam into the dealer with tail light issues and blown fuses

Jun 17, 2010 | 1992 Ford Ranger

2 Answers

Gemmy inflatable band light show 10ft


Is the fuse inside the sound box .. does it look like the fuse in the end of the plug .. Thanks

Dec 02, 2009 | Gemmy Inflatable Polar Bear on Motorcycle

1 Answer

Dash lights don't work


Sounds like its most likely just a blown fuse. It happened to me last week.
In the fuse box down on the driverside floor, pull the one that is on the top row closest too you (I think it shows for 'tail' on the diagram.
There should be a fuse puller in the fuse box as well as a replacement fuse down on the bottom of the box. If not, they're easy to find.

Aug 26, 2009 | 2002 Kia Sportage

8 Answers

My gemmy brand light show christmas tree not working........


When you press the reset button on the controller box, then you need to press the small recessed button on the back of the remote control. You'll need a pen to get in there, or better yet a paper clip. That will reset the remote.

Dec 13, 2008 | Toys

3 Answers

Gemmy light show lollipops not working right


The gemmy light shows are amazing when working correctly. BUT that may be for one season only. I bought the white trio set of Christmas trees after one season the trees turned brown, tried to get in touch gemmy. Two days later my reply was I improperly stored my trees. All the other set of trees I've seen turn brown after one season. As far as I know gemmy quit making the white trees. Long story short they did't warranty my trees, as for the lollipops 4 or 5 light systems aren't interchangeable, I tried to replace the led in my 5 light system with a led from a 4 light system the led worked but wouldn't sync. When trying to make repairs you must use parts from alike sets of the same year models, alike models from different years don't work. Also when changing led circuit boards solder the wires the way you take them off or you'll short the board out. If you have bad sets of lights you can make repairs if they are alike.

Nov 18, 2008 | Sport & Outdoor - Others

Not finding what you are looking for?
Toys Logo

Related Topics:

930 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toys Experts

kakima

Level 3 Expert

101406 Answers

yadayada
yadayada

Level 3 Expert

67757 Answers

ray gallant

Level 3 Expert

40423 Answers

Are you a Toy Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...