Question about Konica Minolta PagePro 1350W Laser Printer

Open Question

Each time I turn on the printer, it prints configuration page

I bought Minolta PagePro 1350EN printer yesterday. It works fine, but it prints Configuration page (with all the settings and counter information in it) each time I turn the power switch on.

How can I disable it? Soon I will need to get a new toner this way...

Thanks in advance!

Posted by on

  • jrohacek Dec 16, 2008

    Problem is solved.



    In customer support they told me to install the printer as a network printer and then configure it via web interface (using printer's IP address in web browser). There is an option/setting to print a test page when printer is switched on, which I disabled. The setting is only available when installed as a network printer, but then the printer remembers it, even if reinstalled again as a local printer.



    Now my printer is not wasing toner. :)

  • Jeannete Feb 28, 2009

    How did you find which Web Browser to use? Where is it?

×

1 Suggested Answer

  • 35 Answers

SOURCE: Konica Minolta Pagepro 1350 page count or Print Config sheet?

please go printer utilty option on your pc then you can print a testpage

Posted on Feb 16, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Konica minolta pagepro 1350w not feeding full page but get stuck at half page.


check the size of the document make sure the print drivers and the printer are correct and matching you might also need to replace the fuser unit or the transfer roller and or image unit

Feb 16, 2014 | Konica Minolta PagePro 1350W Laser Printer

1 Answer

Konica Minolta Pagepro 1350 page count or Print Config sheet?


please go printer utilty option on your pc then you can print a testpage

Feb 10, 2010 | Konica Minolta PagePro 1350W Laser Printer

1 Answer

I have a Konica Minolta pagepro 1350W printer. I


Please diregard. Since I was using an aftermarket toner cartridge, I took a chance and bought an OEM cartridge and... voila... it's working fine. Apparently, all I had was a bad cartridge.

Oct 07, 2009 | Konica Minolta PagePro 1350W Laser Printer

1 Answer

Konica Minolta PagePro 1350W laser printer. Have


your carteidge OPC duram is faulty .
so change cartedige

Apr 25, 2009 | Konica Minolta PagePro 1350W Laser Printer

2 Answers

Pagepro 1350w install/print problem, vista document stuck in queue,error


Go to control panel, printers, right click the pagepro and select properties. Click the ports tab and make sure that the port is set to a USB port. This did it for me.

Mar 17, 2008 | Konica Minolta PagePro 1350W Laser Printer

2 Answers

PagePro 9100 says "1 active job" but won't print


I found out that it was some (vector) snowflakes we had in the art that had gradients that caused the printer to freeze.

We removed (in Adobe Illustrator® CS3) all of art work then replacing it on piece at a time, printing OK until we added the snowflakes. Turning the gradients into just halftones was our solution. The printer representative is going to give our printer a memory upgrade for free.

Feb 20, 2008 | Minolta QMS PagePro 9100 Laser Printer

Not finding what you are looking for?
Konica Minolta PagePro 1350W Laser Printer Logo

Related Topics:

697 people viewed this question

Ask a Question

Usually answered in minutes!

Top Konica Minolta Printers & Copiers Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

5695 Answers

David Burkhart
David Burkhart

Level 2 Expert

207 Answers

George Mclaughlin

Level 2 Expert

330 Answers

Are you a Konica Minolta Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...