WRONG IP ADDRESS

You can assign Different Ip-address manually,Or use the Proxy to change the ip-address,by hiding the Original Ip-address or contact the ISP get the Dynamic Ip-address and Change the Ip-address,You can check the Ip-address at here
http://www.ip-details.com/

To open the set up page of the router of the router , one of your computer should be able to go online through the router.
It could be a wired computer or wireless computer.
If it is a wireless computer then make sure that the computer is connected to your own wireless network.
Do not change any wireless settings on the router using a wireless computer.
OK ! Now you have a computer online through the router and you want to open the set up page of the router.

First step is check the IP address of the computer.
Check the IP address and the Default gateway on the computer.

For Windows XP

START ==> RUN ==> type in cmd in the RUN box==> click OK or Hit ENTER . You will see a black window that is a command prompt . In the black window type in " ipconfig " ==> and Hit ENTER on your key board .

For Windows Vista and Windows 7

click on START ==> type in cmd in the start search box ==> enter ==> you will see the black window. Type in " ipconfig "you will see a lot of information. Try to find out the local area connection IPv4 address .

Note down the Default gateway number.

For MAC OS

Click APPLE icon in the right top corner of the computer. Go to System Preferences ==> go to Network ==> you will find the option Built in Ethernet or Airport whichever is connected. If you go to that you will find the Ip address and router Address.

The default gateway is the IP address of your router.

This IP address of the router will be used to open the set up page of the router

Now you got the IP address of the router.Open the Internet Browser ( Internet Explorer, Firefox, Safari )

In the Address bar of the browser Type the IP address of the router.

Do not type http:// or www just type in the IP address only.

It will ask you for the user name and the password of the router.

This is the User name and the password of the router and NOT the wireless password. On a wireless router, there are 2 passwords. One is to access the router and the other one is for the wireless network.

For most of the routers the default password will be " admin " . for some routers the default password is " password ". For Linksys router the default password is admin and no user name.

To open the set up page of the router of the router , one of your computer should be able to go online through the router.
It could be a wired computer or wireless computer.
If it is a wireless computer then make sure that the computer is connected to your own wireless network.
Do not change any wireless settings on the router using a wireless computer.
OK ! Now you have a computer online through the router and you want to open the set up page of the router.

First step is check the IP address of the computer.
Check the IP address and the Default gateway on the computer.

For Windows XP

START ==> RUN ==> type in cmd in the RUN box==> click OK or Hit ENTER . You will see a black window that is a command prompt . In the black window type in " ipconfig " ==> and Hit ENTER on your key board .

For Windows Vista and Windows 7

click on START ==> type in cmd in the start search box ==> enter ==> you will see the black window. Type in " ipconfig "you will see a lot of information. Try to find out the local area connection IPv4 address .

Note down the Default gateway number.

For MAC OS

Click APPLE icon in the right top corner of the computer. Go to System Preferences ==> go to Network ==> you will find the option Built in Ethernet or Airport whichever is connected. If you go to that you will find the Ip address and router Address.

The default gateway is the IP address of your router.

This IP address of the router will be used to open the set up page of the router

Now you got the IP address of the router.Open the Internet Browser ( Internet Explorer, Firefox, Safari )

In the Address bar of the browser Type the IP address of the router.

Do not type http:// or www just type in the IP address only.

It will ask you for the user name and the password of the router.

This is the User name and the password of the router and NOT the wireless password. On a wireless router, there are 2 passwords. One is to access the router and the other one is for the wireless network.

For most of the routers the default password will be " admin " . for some routers the default password is " password ". For Linksys router the default password is admin and no user name.

To open the set up page of the router of the router , one of your computer should be able to go online through the router.
It could be a wired computer or wireless computer.
If it is a wireless computer then make sure that the computer is connected to your own wireless network.
Do not change any wireless settings on the router using a wireless computer.
OK ! Now you have a computer online through the router and you want to open the set up page of the router.

First step is check the IP address of the computer.
Check the IP address and the Default gateway on the computer.

For Windows XP

START ==> RUN ==> type in cmd in the RUN box==> click OK or Hit ENTER . You will see a black window that is a command prompt . In the black window type in " ipconfig " ==> and Hit ENTER on your key board .

For Windows Vista and Windows 7

click on START ==> type in cmd in the start search box ==> enter ==> you will see the black window. Type in " ipconfig "you will see a lot of information. Try to find out the local area connection IPv4 address .

Note down the Default gateway number.

For MAC OS

Click APPLE icon in the right top corner of the computer. Go to System Preferences ==> go to Network ==> you will find the option Built in Ethernet or Airport whichever is connected. If you go to that you will find the Ip address and router Address.

The default gateway is the IP address of your router.

This IP address of the router will be used to open the set up page of the router

Now you got the IP address of the router.Open the Internet Browser ( Internet Explorer, Firefox, Safari )

In the Address bar of the browser Type the IP address of the router.

Do not type http:// or www just type in the IP address only.

It will ask you for the user name and the password of the router.

This is the User name and the password of the router and NOT the wireless password. On a wireless router, there are 2 passwords. One is to access the router and the other one is for the wireless network.

For most of the routers the default password will be " admin " . for some routers the default password is " password ". For Linksys router the default password is admin and no user name.

You may have to reset the router first there will be a button on the back get a paper clip and push it in for 5 seconds.

To open the set up page of the router of the router , one of your computer should be able to go online through the router.
It could be a wired computer or wireless computer.
If it is a wireless computer then make sure that the computer is connected to your own wireless network.
Do not change any wireless settings on the router using a wireless computer.
OK ! Now you have a computer online through the router and you want to open the set up page of the router.

First step is check the IP address of the computer.
Check the IP address and the Default gateway on the computer.

For Windows XP

START ==> RUN ==> type in cmd in the RUN box==> click OK or Hit ENTER . You will see a black window that is a command prompt . In the black window type in " ipconfig " ==> and Hit ENTER on your key board .

For Windows Vista and Windows 7

click on START ==> type in cmd in the start search box ==> enter ==> you will see the black window. Type in " ipconfig "you will see a lot of information. Try to find out the local area connection IPv4 address .

Note down the Default gateway number.

For MAC OS

Click APPLE icon in the right top corner of the computer. Go to System Preferences ==> go to Network ==> you will find the option Built in Ethernet or Airport whichever is connected. If you go to that you will find the Ip address and router Address.

The default gateway is the IP address of your router.

This IP address of the router will be used to open the set up page of the router

Now you got the IP address of the router.Open the Internet Browser ( Internet Explorer, Firefox, Safari )

In the Address bar of the browser Type the IP address of the router.

Do not type http:// or www just type in the IP address only.

It will ask you for the user name and the password of the router.

This is the User name and the password of the router and NOT the wireless password. On a wireless router, there are 2 passwords. One is to access the router and the other one is for the wireless network.

For most of the routers the default password will be " admin " . for some routers the default password is " password ". For Linksys router the default password is admin and no user name.

hi there,

Flip the router over,you would see the IP address.

or

Click on start and select run( if you are using Windows XP) and type in ipconfig and hit enter.
Default gateway is your routers ip address.

Type in ipcofig in Quick search and hit enter, if you are using windows vista or windows 7.
Default gateway is your routers ip address.

try resetting your modem, not the router. Unplug it, wait a bit and plug it back in. the modem needs to see the routers ip address so it allows connectivity. Right now the modem has your computers ip address and doesn't see the router, until you reset it. try it, it should work.

the other persons tip is trash mines better ;)

you can go to your routers website and enter it manually. Type 192.168.1.1 this might be it or try 192.168.2.1 or 192.168.1.100

when it shows your routers info write it down and then put it in your xbox's network by entering it manually. btw the secondary DNS is just 0.0.0.0 if it doesn't give you two. the gateway is just your routers ip address.

what else you can do is do port forwarding.
But the xbox is not a static ip address so it'll change. what you can do is when it says to put your ip address in your xbox put all the numbers the same as the routers ip address BUT DON'T USE THE SAME LAST NUMBER! so like if your routers ip address is 192.168.1.1 you can use 192.168.1.23 i use 192.168.2.15 but you may not have the 2 in yours.

http://portforward.com/english/applications/port_forwarding/XboxLive360/XboxLive360index.htm
a website that'll help

http://support.microsoft.com/kb/908874
list of ports you have to open

any other ?'s email me at mbish1993@yahoo.com

Please open your router page and open the DMZ page give an IP address.
Then open X-box page and force the same ip address it will allow your x-box to communicate with the router.

assign a static ip address in teh x-box in teh range of ur router and login to teh router inter face and put that static ip address which u assigned for ur x-box in DMZ and reboot teh router and x-box that will work
it might be a port blocking or fire wall action so try this
thx rate me solved if its helps