Question about Pioneer PureVision PDP-5030HD 50 in. HD-Ready Plasma Television

1 Answer

No picture on Pioneer plasma

I was watching my Pioneer plasma when it made a sharp crack and then the screen went black. I am not sure of the model number of monitor but the control box is a PDP RO3U. Now when I turn on the monitor the LED turns red and blinks 5 times over and over. Thanks for any help.

Posted by on

  • Anonymous Jan 14, 2009

    the tv model is the pioneer pdp 5030hd...... i found out that it is a power supply board and pioneer had a defective part list on this model.... complain as I did to pioneer and they may fix it for free........

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 479 Answers

First of all check out the fuse that mostly get blowned out in this problems.if the fuse is perfect then it could be the faulty capacitor issue check out on the main board with the help of the multimeter and replace the faulty ones and it should work properly.

Posted on Dec 10, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 42 LG Plasma TV with a broken screen


NO....You must pay attention to all numbers on the back of the TV. Verify these with your tech or contact your LG customer support for the correct board numbers. If the screen was broken I doubt if you can repair this for less than it cost to replace. The screen for this one runs at about $650.00. Good Luck and good advice!

Oct 01, 2009 | LG 42PG20 42 in. Plasma HDTV

5 Answers

Where can I sell a pioneer pdp 5070pu plasma tv for parts?


HI, the best way to do this is to disassemble the set and post all the individual internal parts like the power board and main PCB logic and v boards, on line on a e-bay type of sale forum. this way, you can make more money. if you post the entire plasma screen with the crack as is, you will not get many hits. is will be assumed that it is damage goods.

Breaking this set down and, posting the internal circuitry piece by piece will make you more money in this case. The power supply board will sale for at least 289.00. and the main logic(PCB) will sale for 300 to 350. i would go this route to maximizes your gain.

May 20, 2009 | Pioneer PDP-5070HD 50 in. Plasma...

1 Answer

Plasma screen has spider cracks...can it be fixed or replaced?


The short answer would be No to both questions, screens are highly technical in their manufacture and as a result make up between half and three quarters of a devices cost of TV's.

It will get worse sadly and end up as scrap or spares, screens do exist but mostly for say monitors or hand type devices (Tablets etc) but most I have seen are salvaged or "new" seconds that failed quality tests in some way.

Check your contents insurance for damage cover? to offset getting a new one.

Hope this helps............

Aug 02, 2017 | Pioneer PDP-5020FD 50 in. Plasma HDTV

1 Answer

Broken plasma


The screen will cost more than a brand new set.. Scrap the boards and sell them on ebay to recover some funds. A new panal is just way too much money.

Sep 06, 2008 | Samsung HP-R5072 50 in. Plasma HDTV

1 Answer

Samsung 42" Plasma spn-4235 Went black


SOMETHING IS LOADING DOWN THE POWER SUPPLY...COULD BE THE Y-SUS BOARD OR UPPER OR LOWER Y-DRIVE BUFFERS...TAKE THE BACK OFF SET..GIVE IT THE SMELL TEST AND EYEBALL THE FLAT I.C.`S ON THE THIN BOARDS TO THE LEFT OF Y-SUS BD. IF NO BURNING SMELL AND NO CRACKS ON THE FLAT I.C.`S ...TRY REPLACING THE Y-SUS BOARD...NUMBER ONE PRIME SUSPECT...DO NOT POWER UP SET WITH BACK OFF UNLESS YOU ARE QUALIFIED SERVICE TECH...JOE ACE

May 13, 2008 | Samsung SPN4235 42 in. Plasma HDTV

2 Answers

Haier Plasma Tv Screen went black


This model has several defective boards and eprom chip. There is an upgrade kit. I'll attach the kit part number and upgrade instructions. http://service.haieramerica.com/documents/SB-TV-0003.pdf

Feb 20, 2008 | Haier 42EP24S 42 in. EDTV-Ready Plasma...

1 Answer

Pioneer pro800hd plasma just made a loud pop and then went to black the power button(red led) is flashing. power supply??, flyback xformer??? any ideas. worth fixing??


The affected models of consumer plasmas are listed below. Anyone who owns or uses one of these models may contact Pioneer through its toll free hotline at 800-421-1404 to arrange for the free, in-home upgrade. If a consumer model is not listed below, no power supply replacement is needed and no further action needs to be taken. If consumers are not sure if their plasma is affected, they should call the toll free hotline for confirmation.
Consumer Plasma Models (13 listed): PDP-505HD PDP-4330HD PDP-503PU PDP-4300 PDP-5030HD PDP-4304 PDP-5031HD PDP-4310 PRO-1000HD PRO-800HD PRO-1000HDI PRO-800HDI PDP-433PU

Dec 30, 2007 | Pioneer PureVision Pro-800HD 43 in. Plasma...

1 Answer

Plasma flat display


in plasma tvs when the screen is all black the most common fix is your y-sus board. if your tv still turns on ( led in front of tv comes on) and you have all of your voltages coming from the smps board then i would get a new y-sus board.

Oct 10, 2007 | Sony FWD-50PX1 50 in. HD-Ready Plasma...

1 Answer

Plasma tv blues


Sorry to here your problems Pat. But just remember life may not be what we want it, but there is always someone over head looking at us! I guess I'm saying it always could be worse, We could have been in New York on Sep.11 in one of the trade buildings. But enough of that. Hope I can help. Now you say Pioneer but no Model number. Well black screen don't always mean power supply. It sounds like a lamp or engine or even Horizontal or Vertical area. Just need to get model straight first. A pop don't sound good but may not be all you think. For as 4Closure, tell me about it. I'm out of a job too and my ex- is a Home Loan Processor in Detroit.

Sep 13, 2007 | Pioneer PDK-50HW3 50 in. Plasma Television

Not finding what you are looking for?
Pioneer PureVision PDP-5030HD 50 in. HD-Ready Plasma Television Logo

722 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pioneer Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74617 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Jaime Hernandez

Level 3 Expert

2322 Answers

Are you a Pioneer Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...