Question about Heating & Cooling

Open Question

Control cord (mattress cover)

Missing an electric control cord for a mattress pad/cover. The model is MP54SQ...that's all I have. Can't go back to seller.....(bereaved family...estate sale) Tried several mfgs. on web but nobody claims this particular model. Please...can someone help.

Posted by on

2 Suggested Answers

  • 1015 Answers

SOURCE: Greetings, I purchased a full size heated mattress

I don;t think there is any repair that is possible and you will need to replace your mattress pad. I would recommend you contact sunbeam directly at sunbeam.com and see if this model has a lifetime guarentee.I tried but they wanted to know how old it was and other info that I could not provide.
If you have had this good of service from their product then I would let them know and maybe they will work with you.
I have had good results contacting companies and praising their products and it don't cost much to try. Thank you

Posted on Jan 16, 2011

SOURCE: Sunbeam dual control heated mattress

Here's a discussion on the issue ::

http://www.fixya.com/support/t1520727-f2_fault_code_heating_pad


Charlie

Posted on Feb 22, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a older Carrier heat pump, model 38YKC060. Does anyone know how cold it will continue to work at?


Heat pumps are of little or no value at temps around 40 degrees or below. And if you use the strips it will cost a small fortune if you have relatively high electric rates as most folks do.

Jan 04, 2017 | Heating & Cooling

2 Answers

Replaced ac unit with new compressor. Fires up as usual but compressor wont start.No fault code coming on controller. Whats the problem?


possible causes include
excessive gas
low gas
relay not working,
faulty thermostat
faulty start/run capacitor
bad circuit board

Jan 03, 2017 | Heating & Cooling

1 Answer

I HAVE A MODEL HOE-HT-L2 THE INSRTUCTIONS ARE NOT CLEAR AS TO SET THE TEMP CONTROLS


Greeting Cyril Hrachovy,

"Say" 22 is an example... You should input whatever temperature where you are comfortable ...

Our master bed room has it's own controls... but usually the vents have been blocked shut... or have magnetic diverters (plastic shields) on the vents... where the thermostat is all warm & happy across the room while I'm freezing against the glass...

A happy medium has to be struck
- between the IVORY-TOWER instruction writer... and
the sun soaked rain drenched REAL WORLD in which
we live (I'm just saying).

Programmable THERMOSTATS are get (fun)... but in reality
the automatic features are soon abandoned... (harmony)
and the REMOTE favors the fickle.

Carnac the Magnificent

Jan 01, 2017 | Heating & Cooling

1 Answer

70 series boiler model #70-148. I need the pionts/box that controls the thermosstat. It runs but it does not matter what the thermosstat is set at. I was told by a pro that the points are sticking. I


Be sure the thermocouple is still working, clean the contact points with crocus cloth and be sure the voltage going in to the controller is correct.

Jan 21, 2015 | Heating & Cooling

1 Answer

How can i get customer service to return a reply to me and take care of my heater?


hi ! Lonnie...I have had great success dealing with this type of problem......I send a letter or email of complaint to the General Manager, with copies to eg State Manager ; City Manager ; Sales Manager ; Service Manager.....make sure that it clearly lists all those people ,so that they all see themselves listed........press the Send button & sit back & wait......Oh! Brother!.........jimbanjo

Jan 08, 2015 | Heating & Cooling

1 Answer

Where can I purchase a venmar supra control 40320v-2


Not sure what this has to do with cars or trucks, but when I google the item you listed, there are many suppliers that pop up.

Dec 02, 2014 | Heating & Cooling

1 Answer

I have a Coleman Evcon electric furnace, the blower fan runs constantly and I have to shut the breaker off inside the front cover to turn it off. The switch is on auto and it runs even when the thermostat...


It could be a thermostat problem. Also it will seem to run constantly as it tries to heat and one of the elements are working which could be a sequencer problem.

Nov 28, 2013 | Heating & Cooling

1 Answer

My deLonghi dehumidifier no longer dehumidifies. The device appears to be functioning OK but is not taking a drop of moisture into the tank. Previously, it filled in about 48 hours.


Hi, Soorry for the delay in the respones but I was stuck in a factory job the last few days.
When this happens usuall either the compressor is not running or the unit is packed with dirt. Can you tell me if you hear the compressor kicking on? I will look up this model and cover all the bases for you. The sysytem is slow on resposnes right now but I will keep on top of this with you till se get it going. Alsocheck the tank for a pluggage in the drain tube.

Feb 06, 2012 | Heating & Cooling

Not finding what you are looking for?
Heating & Cooling Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Heating & Cooling Experts

paulcarew

Level 3 Expert

2047 Answers

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Cris Sparks
Cris Sparks

Level 2 Expert

338 Answers

Are you a Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...