Question about Lexmark X2350 All-In-One InkJet Printer

1 Answer

Difficulty installing When I tried to install the printer according to their set-up sheet there was a big "threat" issued as to a virus. So I stopped and disconnected everything.Now I can use it as a copier as it is not connected to the computer...Any reason??

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert that has over 500 points.

  • Expert
  • 309 Answers
Re: Difficulty installing

Hi should be easy enough to setup. it might be the virus checkers just being fussy and picking it up as a virus but to be on the safe side download the drivers from here then disconnect the lexmark if its connected to the pc. then run the file you downloaded, until it asks you to plug in the printer. once u get the message plug it in and switch on the printer. it should set it up with no problems. if it asks for any drivers you just direct it to where u extracted the downloaded file too.. Hope you get it working.. All the best John

Posted on Mar 02, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

We bought a e-studio 181 copier , when we power it on after 20 sec the indicator shows us Err and no indicator lightening

first press CLEAR/STOP BUTTON and key 8 and hold it together.
If there is any error code, it will show. i.e. C26 or similar. So get back with error code!!!

But, one wild guess for the solution... Before you turn the copier On, did you install the developer inside and follow the procedure according the installation sheet?
If NO, go trough the installation sheet and follow the developer installation and initialization.

Hope that helps!

Jun 18, 2011 | Toshiba E-STUDIO 211C Copier

1 Answer

I've just bought a new kodak printer ESP3250 last week, and installed everything and got it set up fine. It was printing fine after I installed it but suddenly stopped after I had printed a few sheets. The...

Sounds like there is a sheet of paper jammed in it. Try taking off the roller access panel in the back (not the access panel by the cartridges). Make sure to only use clean sheets with proper humidity level to avoid jams. Also fan the sheets before feeding to disperse any static.

Mar 28, 2011 | Kodak ESP 3 Multifunction Printer/ Copier/...

1 Answer

My printer continually feeds more than one paper through at a time, with whatever is being copied printing the document in part on one sheet and the remaining document on the other. HELP!!!

Software related problem, try to remove driver installed and download latest version of driver, watch out for an error while installing and or try to run anti virus for possible virus infection.

Mar 21, 2010 | HP PSC 1510 All-In-One InkJet Printer

1 Answer

Scanner won't scan. printer works fine

This could be a driver issue, but it could have other causes as well. (The printer and scanner use different drivers.) Best to check that your installation is complete, according to the instructions in your user guide. Also be aware that there are firmware upgrades for your printer, which you may need to install, available here.
If the Canon software is fully installed, and updated, and you continue to have difficulty, please go here and type 'scanner won't work' into the search bar and work through each of the possible solutions offered as response.

I hope this information allows you to resolve this issue. If you need further assistance, please post back with a comment to this thread.
If I've managed to answer your question or solve a problem, please take just a moment to rate this post....thanks!

Aug 05, 2009 | Canon PIXMA® MP530 All-In-One Printer

2 Answers

Need driver for HP officejet 6110 all-in-one

You can download drivers and manual from the page below.

HP Officejet 6110 All-in-One Printer

After driver setup has finished unplug printer USB and install drivers, the software will tell you when to plug back the printer.
Set your printer as default when asked during installation.


Feb 25, 2009 | HP OfficeJet 6110 All-In-One InkJet...

1 Answer

Installing CD software for Lexmark X-75

the virus might not be removed properly.ok buddy you try the kespersky antivirus and make it updated. and scan your computer for threats. if it doesn't work send me response i will try my best if it works then also response at my id

Jan 23, 2009 | Lexmark X75 All-In-One InkJet Printer

1 Answer

Canon pixma mp160 flashing E2

Found this on our site:
How to clear Error Code Canon printers MP150 MP160

E2-2 No paper (ASF)
E3-3 Paper jam
E4 No ink
E5-5 The ink cartridges are not installed or a non-supported ink cartridge is installed ,
or the ink cartridges are not installed properly
E8 Waste ink absorber full, or platen waste ink absorber

E9 The connected digital camera / video camera does not support Camera
Direct Printing
E14 The Ink cartridges whose destination are wrong
E15 Ink cartridge is not installed E16 - Ink remaining is unknown
E16 -E19 Failed to scan head alignment sheet
E22 Carriage error
E23 Paper feed error
E24 Purge unit error
E25 ASF(cam) sensor error
E26 Internal temperature rise error
E27 Waste ink absorber full or platen waste ink absorber full
E28 Ink cartridge temperature rise error -
E29 EEPROM error
E33 Paper feed position error
E35 15 USB Host VBUD overcurrent error - USB
E37 17 Abnormal motor driver error
E40 20 Other hardware error
E42 22 Scanner error

try this method:

1) With the printer powered off but connected to a power source, press the Power button while pressing and holding
the Stop/ Reset button.
2) When the Power LED is lit, press the Stop/Reset button two times while pressing and holding the Power button.
3) When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a
service mode. (Waiting for menu selection)
4) When the LED lights in green, press the Stop/Reset button the specified number of time(s) according to the
function listed in the table below.(Each time the Stop/Reset button is pressed, the LED
lights alternately in
orange and green, starting with orange.)
The number of the Reset
button pressing
LED Function Remarks

0 time Green Power off
1 time Orange Service pattern print
2 times Green EEPROM print
3 times Orange EEPROM reset
4 times Green Waste ink counter reset See waste ink counter reset
procedures below.
5 times Orange Destination setting See Destination setting
procedures below.
6 times Green Print head deep cleaning
11 times Orange Button / LCD checking
12 or more times Returns to a menu selection
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe

Nov 23, 2008 | Canon PIXMA MP160 All-In-One InkJet...

2 Answers

Installation issues

Hi, On the driver installation, you may want to try: 1. Boot your PC without the printer connected; 2. go to Start, Printers & Faxes; 3. Uninstall all instances of your printer (might be 2); 4.Shutdown; 5. Connect your printer and power up the printer and the PC; 6. Allow Windows to autodetect and auto-install. On the number of pager per minute printing, 36 ppm black, 27 ppm color are only possible in Fast Draft mode according to HP printer Data sheet. Hope this be of some help/idea. Good luck and kind regards.

Aug 25, 2007 | HP Deskjet 6940dt InkJet Photo Printer

Not finding what you are looking for?
Lexmark X2350 All-In-One InkJet Printer Logo

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Printers & Copiers Experts

Roopesh S
Roopesh S

Level 2 Expert

228 Answers

Sanath Kumar V

Level 3 Expert

684 Answers


Level 3 Expert

18258 Answers

Are you a Lexmark Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides