Question about Linksys VOIP VONAGE PHONE ADPTR 2-PORT PAP2 Router

4 Answers

3rd light from top not on

It's affecting my Dish network program download. All plugs are secure and in the same place the computer guy put them in. No changes to anything. 3rd light just went out a few days ago. No problems with internet or Vonage. I have a brand-new adaptor fresh out of the box and when I plugged that in, only the top two lights went on (checked after 30 minutes), so I switched back to old adaptor.

Posted by on

4 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

The first and second light burning, but the third and the fourth is not burning this two pieces of what to do The first and second light burning, but the third and the fourth is not burning this two pieces of what to do

Posted on Apr 07, 2011

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 399 Answers

Just disconnect all the connections and then refit them again at proper places as some of the connections has come up loose.

Posted on Dec 10, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 275 Answers

Try restarting your computer when you plug in the new adaptor

Posted on Dec 10, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 734 Answers

Hi,I would suggest you to first trying unplugging/ switching off your device for 5 minutes. This restores and refreshes the device. Go for it
Let me know if this works, if it doesn’t then I’ll provide some other alternative solution.
Thanks


Posted on Dec 10, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I cannot find the place to put in my facebook code supplied by dish network


Hi, I just came across your post and I would be happy to assist you. So to intergrate your Hopper and your facebook account, You can press the Blue Hot key on your DISH remote and then scroll to & select the facebook app. Now select "Create User" and then a link and code will appear. If you follow that link on a computer, the area to enter the code should appear top link the accounts. If you are still having issues and need additional assiatcance, please feel free to PM DISH directly on facebook here: http://goo.gl/dgbNL Thank you!

Mary Catherine Brady
Team Lead- Social Media
DISH, L.L.C.
Sunday-Wednesday 2:45pm-11:15pm, Thursday 1:30pm-10:00pm (MST)

Mar 25, 2014 | DISH Network Hopper Whole-Home HD DVR

2 Answers

I can't find a code for my BOSE Solo on the Dish network Hopper remote. Can anyone help?


Don't go and search for IR codes as you'll waste your time. Use the learning method. Take your bose remote and put it on a flat surface and point it toward the little square receiver on the dish remote (located on the top left side). Then press the "aux" mode button on the dish remote until all the mode buttons light up and the aux mode light starts to blink. Then press the record button on the dish remote for 3 seconds until the aux mode button lights up and stays lit (it then stays lit during the whole learning program). On the dish remote press the button you want to learn but don't hold it down (I started with the up volume) . Then press the corresponding button on the bose remote but hold that down until the aux mode button blinks once and comes back on (if the mode button blinks three times the dish remote did not learn the command and you should try changing the batteries on the dish remote if it happens repeatedly that it fails to learn). Program the remaining commands by repeating the process of pressing a button on the remote, then pressing and holding the corresponding button on the bose remote. Don't be afraid to do it with the mute and the power buttons too. During this process if you don't press a button for more than 30 seconds it will time out and nothing will be recorded and you will need to start again. To end the programming press the aux mode button. When you are using the bose solo using the dish remote you just need to remember to press the aux mode button first so it flips to command the bose solo.

Dec 30, 2012 | DISH Network IR Remote Control

3 Answers

Does anyone know the remote code for a sanyo tv model dp42647 on a dishnetwork remote


Remote Codes ' MyDISH ' DISH Customer Support

https://www.mydish.com/support/remotecodes
Remote Control Manuals · Program Remote to TV/Other .... remote, product type, and manufacturer below to see the current known remote codes you should try.

My Dish remote needs programming for Sanyo TV ... - Directly

https://www.directly.com/.../dish-network-my-dish-remote-needs-progra...
My Dish remote needs programming for Sanyo TV, Model DP226649. My Dish ... Needcode. Alta asked this ... Dish Network • 16808 answers • 95% helpful. Code is ... Test volume control, if it works you're set ... try 590 it should work. tivosat.

How do I program my dish remote to work for my Sanyo TV.

https://www.directly.com/.../dish-network-how-do-i-program-my-dish-re...
Dish Network. How do I program my dish remote to work for my Sanyo TV. ... entercode 590 press pound then sat Then try to turn tv on and off then try volume.

How do you program a dish network remote to my sanyo tv? ' Ya


Jan 09, 2012 | Sanyo 42 in. LCD TV

2 Answers

Lost my Dish network remote for the upstairs tv (LG) - which has NO box. Is there anyway to program my TV remote, so I can access the TV staions - turn on the network basically???????


No,the Dish Network satalite box signals require it own remote for it INFER RED INPUT and INFER RED OUTPUT signals.Call Dish Network customer service ask for a another original Dish Network remote.U pay $5 or $6 dollars a month for the satalite box as rental.They should wave the fee or charge u very little for a another remote.

Sep 05, 2011 | Universal Remote Control Dish Network...

1 Answer

NEED A CODE TO PROGRAM DISH NETWORK 5.4IR REMOTE TO OPERATE PHILIPS HTS3565D


Hello! My name is Becki, with DISH Network. Programming the remote to the TV is a pretty easy process. I have given some codes that should work to program the remote. If not, please let me know!

1. Hold down the clear TV button until all lights light up at the top of the remote
2. Punch in a 3 digit code (provided below)
3. Press the # (POUND) button
4. Try powering the tv on/off, and the volume. If one or more of these functions do not work, start over from step 1 with a different code

566
828
824

Becki Barned
DISH Network Customer Service
becki.barned@dishnetwork.com

Jul 13, 2011 | DISH Network IR Remote Control

1 Answer

The front green light is on. I want to reset my dish vip 211 k receiver.


Hi jo_If,my name is Mike Houston of DISH Network and if you want to reset your receiver unplugit for 10 seconds and plug it back in. It will power up and acquire the signaland download the program guide.

Mar 15, 2011 | DISH Network ViP 211 DTV Receiver

1 Answer

How do i program my new vizio tv with its original remove using dish network as the cable provider.


Hello, my name is Tommy Faust with DISH Network. I'm sorry you're having problems programming the remote, I would be happy to help.

What you would want to do to program the remote is this:
1. Hold the TV button until all buttons on top light up.
2. Release and it will be blinking.
3. Point the remote at the TV and enter 505 and press #
If it's working hit SAT and you're good to go! If not repeat the steps but try putting 627 instead of 505. If still not working try 756.

Hope this helps you! If you have any questions feel free to post here or reach me at thomas.faust@dishnetwork.com

Dec 08, 2010 | DISH Network IR Remote Control

1 Answer

My UHF por controller is not running my secondary tv.


davidauriti

If none of the lights light up on the top of the remote when you press/release Select, check to make sure the batteries are placed correctly in the remote. If they are, you may need to readdress the remote to the receiver. I have provided instructions on how to program the remote to your receiver. I hope this helps.

Program remote, step 5:
http://www.dishnetwork.com/SupportSection/remote-setup
Ray Calo
DISH Network

Jul 11, 2010 | DISH Network 142923 Remote Control

1 Answer

TV 2 remote, have to use the TV remote instead of Dish remote for the volume control


You will need to program your dish remote to your tv, find the 3 digit code for your tv and on your dish remote press the TV button till all lights light up at the top of the rem, then enter the 3 digit tv code and then press pound. this will now programm that rem to your tv. be sure to press the SAT button to put back into SAT mode to operate your Dish programming.

Nov 01, 2009 | DISH Network IR Remote Control

1 Answer

Viewsat platinum receiver


Hi mokad whenthe receiver has the problem of the screen "shiver" what you need to do is makesure all connections are tight and secure. Then you will want to press thebuttons of MENU-6-1-1, you will then select Check Switch and TEST and after thetest is complete you will clear out of all menus and the receiver will resetand require the signal, download the program guide and you will have your clearTV programs. MikeHouston of DISH Network

Oct 26, 2007 | Televison & Video

Not finding what you are looking for?
Linksys VOIP VONAGE PHONE ADPTR 2-PORT PAP2 Router Logo

72 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

mark

Level 2 Expert

105 Answers

Are you a Linksys Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...