- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The reason you are having this problem is that the maximum size memory card supported by this camera is 2GB. Any card with a larger capacity - like your 4 GB card - can not be initialised by the camera.
The S700 as it came from the factory CANNOT use a 4 gig card. You must go to the Fuji USA website and download the firmware update. You will need to have the program that came with the camera installed, and the cable that also came with the camera. Make sure that you have fresh batteries in the camera. Instructions are on the Fuji website along with the download for the firmware. You are actually going to "flash" the firmware in the camera just as if you were doing a BIOS flash in your computer. Personally, I only use smaller cards and remove the pics soon after I take them. A 2 gig card will hold about 150 full rez pics. Get them out of the camera....don't save them forever on the card!
The longer answer entails fat16 vs fat32 abilities, and the posibility of reformatting your card on the computer in an attempt to possibly get the s7000 to recognise it with mixed success. Since the s7000 is fat16, it can recognise only 2Gb of data.
The xD cards max out at 2Gb. CF goes much higher, but only 2Gb will be recognized.
On a related note, if you do continuous shooting or movies and use an xD card, make sure you get the H-type (not M or M+) as this is higher speed and will avoid timing issues. All of the newer CF cards are plenty fast already.
S7000 is only rated for 1Gb compact flash cards. It apparently works with 2Gb ones but as I and a lot of others have discovered no matter how you tweak around sectors and clusters it won't read the thing.
what OS are the PC's using - did you use the same card reader on all PC's
can you copy the pictures off the CF card using the camera connected to the PC - rather then connect to the PC
then reformat the CF card in the camera with the camera software - see if that helps