Question about Hayward Navigator Pool Cleaner

1 Answer

Swimming pool cleaning robot doesn't move

My swimming pool cleaning robot doesn't move - it seems to work but won't "walk". Any ideas how to fix it?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

Sound like your filter is dirty. Try backwashing if you have a sand filter, or clean your cartridges if that's what you have. A dirty filter will reduce water flow, which in turn affects the Nav.

Posted on Jan 02, 2009

  • De Wheels May 22, 2013

    I actually just need to know ho to turn on the skimmer as it wasn't turned on when opened today.

  • rrwest May 22, 2013

    If your pump is running (properly), there must be a source of water other than the skimmer. Perhaps a dedicated drain line or other suction. If that is the case, you could have a valve on the front of the pump which needs to be opened, or there is a closure of some sort in the bottom of the skimmer. If the pool was just opened, you might find a plug in the bottom of the skimmer that was put there in the fall.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

It tries to fire once and fails. heater service lite then comes on. The LED red lite on the Fenwl Box blinks 3 times indicating ignition lock out. What do we do to fix this problem?


Hot Tub Spa - Heater Troubleshooting Guide - PoolAndSpa ...

www.poolandspa.com/page596.htm
The World's Oldest & Largest Web Site For Swimming Pool & Hot Tub Spa .... close to the element, and the pump suddenly quits - it's dry fire time in just a minute or two. ...We think it's a safe bet to say that one of the major causes of heater failure ... It's much easier to describe what doesn't cause it than to attempt to explain ...

Spa and Pool Heating Problems - Swimming Pool Information


Jan 05, 2016 | Pool & Spa

1 Answer

Pool heater won't heat water


How big a pool? You normally will not notice a temperature rise immediately. On average, swimming pools will see a one degree rise in temperature every 45 - 90 minutes.

Jan 22, 2013 | Jandy Laars LX Pool Heater / 400,000 BTU /...

1 Answer

IMy heater does not turn on, I getting a "F1" code.


I looked up the manual for this heater and it doesn't document the "F1" code. For this reason I would call Haywardtechnical support at 908-355-7995 and they should be able to help you resolve this issue.

Please let me know how this works out. Thank you.

Sep 02, 2011 | Hayward H350fdn Low Nox Nat Gas Swimming...

1 Answer

I have a Hayward H100IH pool heater. With the pool filter on the heater starts to heat up when I turn up the thermostat, but the heat turns off after a few seconds.


That doesn't sound fun. You could call the Hayward technical support number at 908-355-7995 and they might be able to figure this out. I hope this helps.

Please vote for this answer. Thank you.

Aug 23, 2011 | Hayward Gas Swimming Pool Heater 100k Btu...

1 Answer

My Hayward H400FDN heater will not switch out of "STANDBY" mode when I press the mode button. Any Ideas on how to fix?


Try resetting it by turning off the breaker that supplies power to the heater. This should be located in the power box at the pool equipment. It is probably a 15 amp breaker.

Apr 18, 2011 | Hayward 400fdn Low Nox Nat Gas Swimming...

3 Answers

Swimming pool heater


try removing and cleaning flame sensor with fine steel wool.its located in lower end of burner box,usually opposite side of ignitor

Sep 02, 2009 | Teledyne Laars Laars Lite 2 Pool Heater...

1 Answer

My Glow bouy does not hold a charge also have no idea where to get it fixed.


If it is failing to hold a charge, the rechargable batteries have probably worn out. As far as I know, you are not able to replace the batteries in this light. You can call backyardcitypools.com, which sold this particular light, and they might be able to tell you how to do it. If not, they can give you some options for replacing the swimming pool light.

Jul 13, 2009 | NRS CANTAR GLOW BUOY FLOATING POOL LIGHT...

Not finding what you are looking for?
Hayward Navigator Pool Cleaner Logo

Related Topics:

651 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hayward Pool & Spa Experts

Jay Finke
Jay Finke

Level 3 Expert

1224 Answers

john h

Level 3 Expert

7409 Answers

Pj Kiley
Pj Kiley

Level 1 Expert

21 Answers

Are you a Hayward Pool and Spa Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...