Question about Xerox Phaser 1235N Laser Printer

1 Answer

Looking for the manual for xerox phaser 1235. transfer belt looks bad .I need some part numbers.thw manual should solve my problem

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Mentor:

    An expert who has written 3 tips or uploaded 2 video tips.

  • Expert
  • 162 Answers

Ger it here :-)

http://www.support.xerox.com/go/results.asp?Xtype=download&prodID=1235&Xlang=en_US&Xcntry=USA&source=XOG&prodName=Phaser%201235

Posted on Dec 10, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a problem about transfer belt error 14


Error 14 is actually the transfer roller, error 16 is the transfer belt.

Error 14 is a transfer roller error and roller needs to be replaced. The part number is 059E05450 and can be ordered below:

http://www.iteminconline.com/059e05450_059e05450-xerox-6120-transfer-roller.htm

Jul 30, 2015 | Xerox Phaser 6120N Printer

2 Answers

OUR PHASER 6180 PRINTER IS SHOWING FUSER LIFE AND TRANSFER LIFE NEEDS REPACING SOON. WHAT ARE THEY AND WILL IT COST MORE TO REPLACE THAN BUY A NEW ONE


Go to this WEB site for fuser parts.
http://www.sparepartswarehouse.com/Xerox,Phaser,6180,6180N,Printer,Fusers.aspx
Go to this WEB site for transfer belt part.
http://www.fastprinters.com/ProductDetails.asp?PARTNO=XER-675K47088

May 16, 2011 | Xerox Phaser 6180N Laser Printer

2 Answers

My phaser 6180 transfer life repalce soon what is


If your Xerox Phaser 6180, 6180mfp, 6280, or 6280mfp is displaying "Replace Transfer Unit" or "Ready transfer Unit Life" you most likely need to replace the transfer unit.
For the 6180 and 6180mfp the part number is 675K47088. For the 6280 and 6280mfp the part number is 675K70583.Here is a video that shows you how to replace this part. It is very easy and requires no tools.

Mar 30, 2010 | Xerox Phaser 6180N Laser Printer

2 Answers

Xerox Phaser 7300 color misregistration


Apparently, turning the unit off for 30 seconds, then back on will force the Phaser 7300 to do a color alignment procedure (according to Xerox support).

Then, if the problem persists, you are instructed to follow a very detailed troubleshooting procedure which I will leave with you in the following link:

Xerox Phaser 7300 Misregistration Issues

I hope this helps!

Mar 15, 2010 | Xerox Phaser 7300DN Laser Printer

3 Answers

Is it possible to reset xerox phaser 6110mfp imaging units


The image unit can be reset.
This is done by use of a small program that Xerox certified engineers use. The process is really simple and only takes about 30 secs, if you have access to the program ( I do... :) ) It can also be used to reset transfer belt life etc ....

Mar 02, 2010 | Xerox Phaser 6110 Laser Printer

2 Answers

Xerox 1235 a dot is going round and round the display


so sure you have a message on the screen please read it for me to help you

May 20, 2009 | Xerox Phaser 1235N Laser Printer

1 Answer

Grainy image quality on my Phaser 7750


Try something, Send a job with 5 pages to it.
Shut the machine off as a page it halfway out of the exit area.. Open the machine and look at the jammed copies. Are they clear in the imaging unit areas but not upon exiting the machine?
If the image is clear around the drums and imaging unit, then the problem would be in the fuser. If the image is grainy and fuzzy in the image area, You could have a bad second BTR roller, the soft black roller on the left side door. One of the developer housings could be bad. You have to remove the imaging units and look in the opening with a flashlight to see if the developer housing brush is thick on the developer roll.
Could have a bad transfer belt or one of the color housings could be bad.
Less likely is a bad laser. But have you taken the wand that is on the front cover and cleaned the laser exposure slots?

May 14, 2009 | Xerox Phaser 7750DN Laser Printer

1 Answer

Xerox phaser6110MFP transfer belt error cant


Transfer Belt Error Aproblem has occurred transfer belt in the machine. Unplug the power cord and plug it back in.If the problem persists
Cleaning the inside of the sensor of the belt and then not change you change the blet assembly moz-screenshot-1.jpgmoz-screenshot.jpg

Apr 22, 2009 | Xerox Phaser 6110MFP All-In-One Laser...

Not finding what you are looking for?
Xerox Phaser 1235N Laser Printer Logo

Related Topics:

106 people viewed this question

Ask a Question

Usually answered in minutes!

Top Xerox Printers & Copiers Experts

Whit
Whit

Level 1 Expert

185 Answers

iteminconline

Level 2 Expert

110 Answers

Philip Hughes

Level 2 Expert

63 Answers

Are you a Xerox Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...