Question about Car Audio & Video Accessories

2 Answers

KENWOOD KDC - W312SAY BUTTON MEMORY 1 - 6 NOT WORKING

JUST INSTALLED THIS RADIO / CD. FOUND AFTER STORING RADIO STATIONS INTO THE MEMORY WHEN SWITCHING OFF THE IGNITION THE STROED MEMORY STATIONS ARE ALL LOST. KEEP HAVING TO GO BACK AND SAVE RADIO STATIONS AGAIN. PLEASE CAN YOU HELP

Posted by on

  • Anonymous Dec 19, 2008

    JUST INSTALLED THIS RADIO / CD. FOUND AFTER STORING RADIO STATIONS INTO THE MEMORY WHEN SWITCHING OFF THE IGNITION THE STROED MEMORY STATIONS ARE ALL LOST. KEEP HAVING TO GO BACK AND SAVE RADIO STATIONS AGAIN. PLEASE CAN YOU HELP

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

It sounds like you have not connected the B+ Battery backup wire so it retains all memory (radio stations & CD track info). There are 2 power wires (RED & YELLOW). 1 of them labelled B+ need to be connected to a permanent 12V supply and the wire labelled ACC needs to be connected to the ignition switch.

Posted on Apr 03, 2009

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 27 Answers

What is the problem but if you want to memoris your station you just search for the station and press and hold the burton number #you wish to program it on

Posted on Dec 11, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can I program the kenwood kdc252u to turn on and off with the ignition? As of now the unit stays on after I turn the vehicle off, or stays off after I turn it on.


you have wires crossed or not hook up ignition switch for radio stereo power wire connects to cars ignition.stereo memory (yellow or orange wire) connects to constant power for radios memory(rad stations /clock)

Feb 26, 2014 | Kenwood KDC-252U

1 Answer

Have a kdc-x596, just installed and in the seek mode for AM does not pick up any stations. Locks on to FM fine. What gives?


Sounds like you didn't have the BLUE power antenna wire hooked up. Pull out the radio to confirm. The BLUE wire (from aftermarket radio) will turn on an antenna booster if there is one in the car. What car is this in?

Dec 23, 2012 | Kenwood Excelon KDC-X596

1 Answer

Unable to store a radio station. When i switch cd player off and on again stations are lost.


Check power wires for blown fuse. Should have 2 (minimum) and one is main power, other is for memory.

Feb 20, 2010 | Kenwood Car Audio & Video Accessories

1 Answer

Can find the stations on the radio but can not keep them on there after the radio has gone from standby


Hi,
You need to "store" the stations when you find them by depressing and holding down a channel preset button to store. If they do not stay stored after turning off the radio or the ignition, then the memory wire(yellow wire) may not be connected, or the fuse blown. It should be connected to power that never disconnects... that is straight to the battery. Check ot out and get back to me if you need more assistance.
regards robotek

Jan 17, 2010 | Kenwood Car Audio & Video Accessories

1 Answer

Kenwood kdc-mp239 car stereo overheating


Did you change the speakers, usually this happen because of the Ohms. Let me explain you, The factory radios are usally 8 Ohms and must of the aftermarket speakers are 4 Ohms or less so if you put 4 Ohms in a radio designed to work with 8 Ohms of coures is going to get hot first and them you burn it out.

Jan 04, 2010 | Car Audio & Video Accessories

1 Answer

CD will not eject from unit.Word'IN' keeps


you can try either pushing the reset switch (which will be a small indentation either on the face or the subpanel behind the face) or disconnect power to the radio for a few seconds.

Nov 30, 2009 | Car Audio & Video Accessories

1 Answer

My kenwood 5016 wont take my code mind u i dont no what botton 2 push as have no book on how it works


Kenwood KDC 5016 Code Entry

After switching on the unit the display will show 'ENTER' followed by 'CODE - - - -'

Press preset [ 1 ] repeatedly for the first digit
Press preset [ 2 ] repeatedly for the second digit
Press preset [ 3 ] repeatedly for the third digit
Press preset [ 4 ] repeatedly for the third digit

Followed by pressing [DISP/NAMES] button to enter.

The radio will display 'ALL OFF' once the code is entered.

Press [SRC] button to switch on.

The set will now operate. 


Nov 10, 2009 | Kenwood Car Audio & Video Accessories

1 Answer

Hi I've got a Kenwood KDC 2020 car radio. How do I tune / set local radio stations?


oh this easy i couldnt figure it out for a while but ill teach u.
first you pik a station by searching and den when you have found the one you want all u do hold the numbe u want thestation on.
example: 104.1 on number 1, 96.9 on number 2

Oct 07, 2009 | Kenwood Car Audio & Video Accessories

1 Answer

I have a kenwood w313 car cd player and it wont store anything


Check you wiring. There are going to be 2 powers in the back of the radio. The yellow wire is the constan/memory wire. Make sure you have it hooked up to constant power.

Sep 03, 2009 | Car Audio & Video Accessories

Not finding what you are looking for?
Car Audio & Video Accessories Logo

Related Topics:

199 people viewed this question

Ask a Question

Usually answered in minutes!

Top Car Audio & Video Accessories Experts

xxxxxx xxx

Level 3 Expert

4706 Answers

yadayada
yadayada

Level 3 Expert

60667 Answers

David Burbee
David Burbee

Level 2 Expert

1868 Answers

Are you a Car Audio and Video Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...