Question about Ideazon Zboard Keyboard

1 Answer

Zboard the letter on my zboard gaming keyset has stopped working, how can i fix it?

Posted by on

  • 5 more comments 
  • unsmited1 Dec 10, 2008

    sorry that was meant to say the letter E has stopped working

  • Anonymous Dec 28, 2008

    Im using my on-screen key board because I have the same problem with my zboard's key not working what so ever....

  • tall41 Jan 04, 2009

    i have the same thing but the no "2" and the right arrow dont work.

    it seems to be the key set as the rubber buttons work if you remove the key board.also the game keyset works ok.

    any ideas?

  • magikrose Jan 22, 2009

    I have the same problem. Last night my space bar would not work. Then the F key, and next the shift. I woke up this morning and more keys were not working. Any fixes or is this just bugged out?

  • Anonymous Feb 22, 2009

    I have the same problem with my zboard's key not working any ideas?

  • bigtrev85 Mar 22, 2009

    I just bought a zboard and when i have the gaming set on (with the red arrows) the no"1" key comes up as " ; " when i hit it so i can't log into world of warcraft. can anyone help



  • Anonymous Apr 19, 2009

    Having a very similar problem, started with the A/left arrow key on the gamepad, then all the keys went dead. zEngine still recognizes the device, but none of the buttons work, please help

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I have had this problem for a while. there about about 20 or so screws on the bottom side of your board. take out your keyset, then unscrew all of those. be careful removing it because of the plastic inside, and all the hardwired buttons on the top will fall out and one of mine broke. Now when you get it open, rip out the rubber keys, they'll just fall off. go wash them. I guarantee they're disgusting. now gently blow out between the plastic sheets, and replace them. make sure they're lined up right. you'll be able to figure out how to line it up. once you finished cleaning it all, you might also want to take a rag and wipe down all the plastic of the casing. put it all back together, and it'll work.

Like I said, I've had this problem multiple times and this always fixes it.

Posted on May 11, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Zboard button malfunction


re-install your driver for your z board and make sure the wow keyset is fitted corectly.

Jun 22, 2009 | Ideazon World of Warcraft Zboard Keyboard...

1 Answer

Where is the Enable button on a Bc zboard?


There isn't one, you have to use the Zboard software to enable the keyboard if it is disabled.

May 31, 2009 | Ideazon World of Warcraft Keyset for...

3 Answers

My zboard is writing z when i press the y button and y when i press the z button!! Please help me!


Open your Ideazon program menu. There will be a virtual display of a keyboard. You can drag and drop the keys to assign them to different locations. Drag and drop the Y button to where it belongs and the Z button to where it belongs then click save. This should fix your problem :) 

Mar 07, 2009 | Ideazon World of Warcraft Keyset for...

1 Answer

Zboard


I had the same problems as you and found this answer on blizzard forums.



First, the disc that comes with your ZBoard is now too old to use. The drivers on the disc were made by Ideazon before Steelseries took over, whereas the WotLK keyset was made afterwards. Steelseries seem to have completely reworked the drivers in the interim.

How to Fix
Step 1. Uninstall your ZBoard.
Step 2. Go to http://www.steelseries.com/downloads/#keyboards and DL the Z Engine.
Step 3. Make sure your ZBoard is plugged in with the standard keyset.
Step 4. Install the new Z Engine.
Step 5. Switch to your WotLK keyset.
Step 6. Run WoW.

I used this solution last night with some success.
Most of the gamer keys now work but some still don't work correctly such as, all the chat buttons default to say.
Hope this helps

Feb 19, 2009 | Ideazon World of Warcraft Keyset for...

3 Answers

ZBoard setup for WoW keyset not working.


go to

www.steelseries.com/downloads

select the USB zboard keyboard and download the relevant patch/software

I have done this, and my WoW ZBoard and all the special functions buttons work

The problem is, ideazon was bought out by steelseries, but this information was no included when you bought the board.

Dec 27, 2008 | Ideazon World of Warcraft Keyset for...

1 Answer

WOTLK Keyset not enabling


http://www.steelseries.com/downloads/#keyboards.

click usb zboard update. open file when downloaded. run the installation and you're set.

Dec 24, 2008 | Ideazon World of Warcraft Keyset for...

4 Answers

WOW Wrath of the Lich King Keyset for ZBoard


I had the same problems as you and found this answer on blizzard forums.

Steelseries took over from Ideazon and Ideazone no longer exist so none of their websites work any more.

First, the disc that comes with your ZBoard is now too old to use. The drivers on the disc were made by Ideazon before Steelseries took over, whereas the WotLK keyset was made afterwards. Steelseries seem to have completely reworked the drivers in the interim.

How to Fix
Step 1. Uninstall your ZBoard.
Step 2. Go to http://www.steelseries.com/downloads/#keyboards and DL the Z Engine.
Step 3. Make sure your ZBoard is plugged in with the standard keyset.
Step 4. Install the new Z Engine.
Step 5. Switch to your WotLK keyset.
Step 6. Run WoW.

I used this solution last night with some success.
Most of the gamer keys now work but some still don't work correctly such as, all the chat buttons default to say.
Hope this helps

Dec 15, 2008 | Ideazon World of Warcraft Keyset for...

2 Answers

Ideazon World of Warcraft on Zboard


Uninstall the zengine reboot then go to http://www.steelseries.com/downloads/#keyboards
Then download the newest version. The light probably wont work work but the keys should. Good luck

Feb 10, 2008 | Ideazon World of Warcraft Keyset for...

Not finding what you are looking for?
Ideazon Zboard Keyboard Logo

Related Topics:

2,835 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ideazon Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18385 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you an Ideazon Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...