Question about Polar AW200 Activity Watch

1 Answer

After resetting, display shows "Error 9999"

After using "stop" button , I can scroll "up" or "down" to "internal test", "default settings", "activate sleep", "usage counters", "monitor".
Time mode is not accesible.
Changing battery does not help.
I can put it into sleep mode and wake it up.
That is it.
Thank you.

Posted by on

  • richiebennet
    richiebennet Jan 08, 2013

    I know this is a really old question, but I'm having the same problem and the link to the answer posted here no longer works. Any help would be appreciated. Thanks

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 74 Answers

This link will answer all your questions...scroll down about halfway to customer info click on and then scroll the rest os thw way down....I hope this helps.

http://www.heartratemonitorsusa.com/Pages/TRANSMITTERS/T31-coded.html

Posted on Dec 23, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I change language settings on my Dell V313 printer


Incorrect language appears on the display

If the "Before you troubleshoot" checklist does not solve the problem, then try one or more of the following:


CHANGE THE LANGUAGE USING THE PRINTER MENUS


1 From the printer control panel, press .


2 Press the arrow buttons to scroll to Defaults, and then press .


3 Press the arrow buttons to scroll to Set Defaults, and then press .


4 Press the arrow buttons to scroll to Use Factory, and then press .


5 Complete the initial printer setup.


CHANGE THE LANGUAGE USING A BUTTON COMBINATION (IF YOU CANNOT READ THE CURRENT LANGUAGE)


1 Turn the printer off.


2 Press and hold down and , and then press to turn the printer on.

The printer resets and starts the initial printer setup.


3 Complete the initial printer setup.
HANGE THE LANGUAGE USING THE PRINTER MENUS
1 From the printer control panel, press .
2 Press the arrow buttons to scroll to Defaults, and then press .
3 Press the arrow buttons to scroll to Set Defaults, and then press .
4 Press the arrow buttons to scroll to Use Factory, and then press .
5 Complete the initial printer setup.
CHANGE THE LANGUAGE USING A BUTTON COMBINATION (IF YOU CANNOT READ THE CURRENT LANGUAGE)
1 Turn the printer off.
2 Press and hold down and , and then press to turn the printer on.
The printer resets and starts the initial printer setup.
3 Complete the initial printer setup.
Printhead error

Apr 22, 2013 | Dell V313w AllInOne InkJet Printer

1 Answer

Mp730 says waste ink near full


To reset waste tank full error in MP730.

1. Press the "menu": Key
2. Press "Copy" Key
3. Press "#" Key

4. Scroll thru the menu headings until you come to "Test Mode" - 12th heading or select (-) as a short-
cut to the last setting.
4a. Press "Set" and the display shows:
Test Mode [1] - [8]
CF-FH3 :WLD-11-02

4b. Press "8" and the display changes to:
Test Mode [1] - [8]
Please wait

***note*** you have to wait until the display changes

Then the display changes to:
8: PRINTER TEST
[2]---[8]

5. Then Press the "3" button and the display shows:

8 - 3 : EEPROM Clear

*** the display scrolls to [0] : INK COUNT
[1] : 2PURGE FLAG

6. Press "0" button - for INK COUNT
7. Press the "Stop" button
8. Press Off then On to set new changes.
9. Printer feeds a blank page after it is turned on again.

This should Reset the printer and remove the WRONG CARTRIDGE error and save you a few dollars.

Aug 03, 2011 | Canon MultiPASS MP730 All-In-One InkJet...

1 Answer

Send me sumsung champ all secret codes ....??? m nt getting exact codes pls help me soon


General Diagnostics: * *#0*# - LCD Test Menu. * *#06# - Show the IMEI number. * *#367# - DB Profile Setting Menu. * *#1234# - Displays the Firmware Version * *#9324# - Phone Monitor. Press up and down to display more. * *#0228# or *#9998*228# - (BAT) Battery statistics. Press up and down to display more. * *#0289# or *#9998*289# - (BUZ) Buzzer test. * *#0638# or *#9998*638# - (NET) SIM network ID. * *#0746# or *#9998*746# - (SIM) SIM Information. * *#0778# or *#9998*778# - (SST) SIM Service Table. Press up and down to display more. * *#0782# or *#9998*782# - (RTC) Real Time Clock Display. Press the "#" key to refresh * *#0842# or *#9998*842# - (VIB) ******** test. * *#1111# or *#9998*1111# - Displays the Software Version. * *#1234# - Displays the Firmware Version. * *#2222# or *#9998*2222# - Displays the Hardware Version. * *#4357# or *#9998*4357# - (HELP) Code help screen. Press up and down to display more. * *#4777*8665# - GPRS Test and Configuration Menu. * *#5002*8376263# - Additional handset information. Press up and down to display more. * *#9998*76# - (PN) Production Number. * *#9998*377# - (ERR) NVM error log. Press up and down to display more. * *#9998*667# - (MMS) MMS Debug. * *#9998*968# - Yamaha test. * *#9998*982# - Edit IM settings * *#9998*2576# - (BRKN) SIM Error. * *#9998*3323# - (DEAD) Forced Crash. * *#9998*5282# - (JAVA) Java Profile Menu. The "Install MIDlet" password is "235282′ * *#9998*5646# - (LOGO) GSM Logo set. Press up and down to set.

WAP Configuration: * *#82# - Display WAP User Agent. * *#92782# - Edit the WAP User Agent. Default setting is "SEC-SGHD807/1.0 TSS/2.5′ * *#827# - Display WAP UA Profile. * *#927827# - Edit WAP UA Profile. Default is setting "http://wap.samsungmobile.com/uaprof/d807_10.xml"\

Digital Audio Interference: * *#3243948# - Digital Audio Interference (DAI) OFF (Resets Phone) * *#32436837# - Digital Audio Interference (DAI) ON

Bluetooth Configuration: * #*3888# - Bluetooth test mode * *#232337# - Displays Current Bluetooth MAC address * *#7263232337# - Changes Bluetooth MAC address. A random number is chosen and you will lose all your previous bluetooth connections. Use with caution!

Reset Codes: Data in the phone will be deleted! * *2767*3855# - Full reset * *2767*2878# - CUST reset * *2767*927# - WAP reset * *2767*667# - MMS reset * *2767*36245# - Email reset

Feb 28, 2011 | Cell Phones

2 Answers

Low tire pressure light wont go out


The Low Tire Pressure Indicator must be reset using the Radio. This can only be performed if you have the factory radio installed in the vehicle. This vehicle does not come with an active tire pressure management system, and as such, this light must be reset manually.
1.) Turn Radio Off 2.) Hold down disp button for 10 seconds 3.) Setup Menu should display 4.) Scroll through menu to view "Tire Pressure" (use seek buttons) 5.) Select the Tire Pressure option (Press Radio Button 1) 6.) Reset should be displayed on screen (Press disp button) 7.) Tire Pressure Light should reset

Nov 29, 2010 | 2000 Chevrolet Impala

2 Answers

Digital control reads REM off and we connot seem to reset the control. What should we do?


Press and hold the "temp up, temp down and mode" buttons at the same time for 5-7 seconds...The display should show REMon or REMoff... You have REMon probably. Toggle with the up/down buttons to show REMoff... This should default back to original display. If not, push the mode button....

Aug 18, 2010 | Raypak Free Hydraulic Lift Gate Delivery -...

1 Answer

The waste ink tank is near full


Hi
I found this in a forum you can try it see if it work for you.

To reset waste tank full error in MP730.

1. Hit the "menu": Key
2. Hit "Copy" Key
3. Hit "#" Key
4. Scroll thru the menu headings until you come to "Test Mode" - 12th heading
5. Hit the "3" button- this will bring up Eprom Clear
6. Hit "0" button
7. Hit the "Stop" button



Also I found this.

First Clean and Dry the Print Head:
I used a cotton swab dipped in 70% isopropyl alcohol (rubbing alcohol). Do not use too much alcohol.
Then dry the heads, again using dry cotton swab. Be careful not leave any cotton threads on the print heads.
Then I padded dry the spongy Ink Absorbers (one for black ink and the other for color ink) using
Separate cotton swabs for each absorber. Do not displace the absorbers. Or you can replace the ink absorbers at this point if you do not want to pad them dry.

Then Proceed to the Waste Tank Reset procedure below:

To reset waste tank full error in MP730.

1. Press the "menu": Key
2. Press "Copy" Key
3. Press "#" Key

4. Scroll thru the menu headings until you come to "Test Mode" - 12th heading or select (-) as a short-
cut to the last setting.
4a. Press “Set” and the display shows:
Test Mode [1] – [8]
CF-FH3 :WLD-11-02

4b. Press “8” and the display changes to:
Test Mode [1] – [8]
Please wait

***note*** you have to wait until the display changes

Then the display changes to:
8: PRINTER TEST
[2]---[8]

5. Then Press the "3" button and the display shows:

8 – 3 : EEPROM Clear

*** the display scrolls to [0] : INK COUNT
[1] : 2PURGE FLAG

6. Press "0" button – for INK COUNT
7. Press the "Stop" button
8. Press Off then On to set new changes.
9. Printer feeds a blank page after it is turned on again.

This should Reset the printer and remove the WRONG CARTRIDGE error and save you a few dollars.


Please all I ask is call back and just gave a vote, it will gave me some satisfaction to know am helping some one, so I will keep on helping.
All The Best: Pineworks

Feb 05, 2010 | Canon MultiPASS MP730 All-In-One InkJet...

2 Answers

I replaced the shuttle and need to do the phasing adjustment. Can you tell me how?


IMPORTANT The printer must be printing the Phase pattern of “H’s” when the Phasing Value is changed, or the New Phasing Value will not be written into NVRAM. If the value is changed when not printing, the printer will return to its default phasing
value when powered off then back on.
1. Install the ribbon.
2. Load full width (136 column) paper.
3. Power on the printer and set top of form.
4. Press Stop to put the printer into NOT READY mode.
5. Press Scroll + Scroll to unlock the Enter key.
6. Press Scroll + Scroll + Return + Enter to enter the CE Tests menu. (Press all four keys at the same time.)
7. The display will show “SERVICE / PRINTER MECHANISM TESTS”, the first menu item. Press Enter to enter the
mechanism tests menu.
8. Press Scrollor Scrolluntil
“PRINTER MECHANISM TESTS / HAMMER PHASING” is on the display.
9. Press Enter. The printer begins printing all H’s, each line preceded by the phasing index number.
10. Press Return. The display will show
“SERVICE / PRINTER MECHANISM TESTS”.
11. Press Scroll or Scroll until “SERVICE / HAMMER PHASE VALUE” is on the display.
12. Press Enter. The top line of the display will show
“HAMMER PHASE VALUE” and the bottom line will show the current phasing index number.
13. Press Enter. The phasing index (followed by an asterisk) will move up to the top line of the display.
14. Press Scroll or Scroll to increase or decrease the phasing index, then press Enter to activate the value as it prints.
Continue to increase or decrease the phasing index until the pattern of H’s appears.

15. When the print pattern is acceptable, press Stop. Printing stops, and the printer automatically enters the current phase
index value into NVRAM. The display shows “NOT READY”.
16. Press Scroll + Scroll to lock the Enter key.
17. Close the printer cover. Press Start to put the printer into READY mode.
NOTE: If you changed the phasing value, power down the printer, remove the shuttle cover, and write the new phase value on
the aluminum shuttle casting.

Oct 06, 2009 | IBM 6400 Matrix Printer

1 Answer

I cannot scan or fax after multiple tries. Can you assist


Hi

Thanks for using FixYa. Try to reset the printer by power cycling it for 4-5 min.s. Also tell me if you are able to print and not fax/scan. Make sure that all the cables are plugged in well. Also tell me if you are getting any error messages on the printer as well as on the computer.

Try and reset it & check if it works. To reset the printer go in the configuration menu where you can reset the printer back to factory defaults.
  • Press and hold the Start and Stop buttons and turn on the printer.
  • Hold the buttons down until “Performing Self Test” is displayed on the LCD.
  • Release the buttons and “Configuration Menu” is displayed.
  • Scroll to the RESTORE FACTORY DEFAULTS item on the menu and press select.
  • Now scroll to RESTORE BASE and press select this should reset your network card password.
  • There is also a RESTORE NETWORK, this will erase the network configuration but will not reset the password.


Please do accept the solution if the issue is resolved or else revert for further assistance.



Thanks

Rylee

Sep 24, 2009 | Lexmark X5470 All-In-One InkJet Printer

1 Answer

Error ##334 show up on display. what is it meant exectly ?


1. Press the "menu": Key
2. Press "Copy" Key
3. Press "#" Key

4. Scroll thru the menu headings until you come to "Test Mode" - 12th heading or select (-) as a short-
cut to the last setting.
4a. Press “Set” and the display shows:
Test Mode [1] – [8]
CF-FH3 :WLD-11-02

4b. Press “8” and the display changes to:
Test Mode [1] – [8]
Please wait

***note*** you have to wait until the display changes

Then the display changes to:
8: PRINTER TEST
[2]---[8]

5. Then Press the "3" button and the display shows:

8 – 3 : EEPROM Clear

*** the display scrolls to [0] : INK COUNT
[1] : 2PURGE FLAG

6. Press "0" button – for INK COUNT
7. Press the "Stop" button
8. Press Off then On to set new changes.
9. Printer feeds a blank page after it is turned on again.

This should Reset the printer and remove the WRONG CARTRIDGE error and save you a few dollars.

Replace all the Ink Absorbers.
QA4-1012-000
QA4-1013-000
QA4-1014-000
QA4-1015-000
QA4-1055-000
Reset the counter to zero.

Replace the printhead. QY6-0042-000 (now QY6-0064-000)
Should cost you about $54 if in the US.

This will only work a few times. Eventually, it will fail to reset
and you will have to replace the Printhead. I hope this helps.

Nov 13, 2008 | Canon MultiPASS MP390 All-In-One InkJet...

1 Answer

When i try to take a picture nothing happens, the power is on fresh battery, the display window on top of camera blinks fEE and 279 blinks when i push the trigger to take a photo, when i hit display it...


Well there are some cameras, if you press it half way, it shows you some things, and when you press it fully, it takes the picture.

Make sure that you are pressing the button all the way.

Also, try to reset the settings by pressing the 'menu' button on the back near your LCD display.

Press the left button near the 'OK' button to make sure you have the left side of the menu highlighted on the LCD display.

Use the up and down buttons near the 'OK' to scroll to the 'pencil' icon.

When the 'pencil' icon is highlighted, press the right button near the 'OK' to highlight the right side.

Scroll up and down until you have 'Reset' highlighted, then press 'OK'.

Scroll down one to 'yes', and press 'OK'.

Your default factory settings are now back to when you originally purchased your Nikon D40 camera

Hope it works.

Aug 20, 2008 | Nikon Cameras

Not finding what you are looking for?
Polar AW200 Activity Watch Logo

1,275 people viewed this question

Ask a Question

Usually answered in minutes!

Top Polar Exercise & Fitness Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18386 Answers

buzz flewhart
buzz flewhart

Level 3 Expert

655 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Are you a Polar Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...