During BIOS update PC unplogged & also I forgot clear CMOS before update .PC starts & all electrical parts work . POSTworks good .but no boot please guide me & also is there a bill that show the compatibility of parts ?FOR EX. : vt8235 instead of vt8230 My MB known as MV43V v7.3 but it has a active lan port !
SOURCE: AN35N Ultra not wanting to boot past BOIS screen
remove your power socket from motherboard and short the pin green and black if the smps is working the problem is with power supply in your motherboard
SOURCE: MV43V motherboard by shuttle
Here are your MB specs:
MV43V/N
- Supports Socket 478 Intel Pentium 4, Celeron with 400/.533 MHz FSB
- VIA P4M266A + VT8235 Chipsets
- DDR 200/266 SDRAM, 2 x 184 – pin DIMM, Up to 2 GB
- 2 x ATA 133
- 4 X AGP device, 2 PCI slots, 1 CNR slot
- Onboard AC97 audio two channels
- Onboard S3 Pro-Savage 3D Graphics
- Onboard VIA VT6103 10/100 Fast Ethernet (MV43VN only)
- 6x USB 2.0
- Micro ATX Form Factor
The your motherboard has an ethernet adapter all you need to do is download the drivers for the ethernet adapter and install them. here is the link : http://members.driverguide.com/driver/detail.php?driverid=206328 do a free subscription first. cheers
T
YE
SOURCE: My AK32E doesn't boot-up. I
See my published guide on the matter, it is entitled My Computer is not turning on!!! Is it dead!!! No POST!!!
This is a common case of mainboard failure.
Take care!
damnor01
59 views
Usually answered in minutes!
×