Question about Sony CCD-TRV238E Camcorder
Everything I tried according to the guide did not do any thing
Any error code on LCD ?
Any light on ?, can you charger the batteries with AC adaptor
If no light on may be the AC adaptor faulty or the system control inside CAM defective in any case you need a Tech qualifier trained from Sony to repair it
Posted on Dec 10, 2008
Tips for a great answer:
Jul 25, 2011 | Sony Handycam DCR-SR82 Camcorder
If the touch screen of the Camcorder is not working, please
follow the troubleshooting steps.
Please make sure that you're using fully charged batteries.
Turn off the Camcorder and turn ON again and check the operation.
Try resetting the Camcorder by pressing the reset button behind the LCD panel.
Note: Please make sure that the Camcorder is turned ON while pressing the reset button.
If the issue persists again, please perform LCD screen Calibration and check if that helps.
Please follow the steps below to perform the LCD Calibration
Perform a power resetting of the Camcorder. To perform power resetting, please remove the battery pack, turn the Power switch to Play/EDIT/ON for more than 15 seconds, turn the Power switch to OFF position and then reinsert the battery pack.
If the issue persists even after performing all the above-mentioned steps, service is required.
I hope this information will help you to resolve the touch screen issue of the Camcorder.
Feb 22, 2011 | Sony Handycam DCR-HC20 Mini DV Digital...
Aug 22, 2010 | Samsung SC-DC173 DVD Camcorder
Jul 26, 2010 | JVC Cybercam GR-D93 Mini DV Digital...
Jun 13, 2010 | Sony Handycam DCR-PC9E Mini DV Digital...
Jan 19, 2009 | Sony Handycam DCR-TRV530 Digital Camcorder
Dec 12, 2008 | Canon ZR900 Mini DV Camcorder
Sep 10, 2007 | Canon DC210 DVD Camcorder
64 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: