Question about Hotpoint Aquarius WD63 Front Load Washer/Dryer

1 Answer

Hotpoint DW440 flashiing lights

Hi,
My Hotpoint washer/Dryer DW440 stopped working with the On/Off button flashing fast and the first button (Drying High heat) and the fourth button (Time Saver) are flashing at a slower rate.

What could have gone wrong with the machine?

Your help is very much appreciate.

Regards,

Jafar

Posted by on

  • coopercoops2 Dec 13, 2008

    DW440 flashiing lights problem any ideas why

  • LLow Dec 14, 2008

    I have exactly the same problem. Lights started flashing yesterday and haven't stopped.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have just seen the same problem on a neighbours WD440G. I have tracked down the problem to the main circuit board at the back, bottom of the machine. Transistor/FET Q9 has exploded. There was water at the bottom of the machine and the wiring in the vicinity of the nearby connector was wet.
This neighbour is in no financial position to be able to buy a new board, or get an official Hotpoint engineer to confirm what we already know. Anyone know where I can get a schematic diagram for the board?

Posted on Jan 07, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Hotpoint aquarius wd440. Flashing lights


press and hold on off button till the display panel lights up.Then press and hold the on/off button and the start /cancel button together.You will now reset the washing machine settings.And just pick your cycle again

Oct 04, 2009 | Hotpoint Aquarius WD63 Front Load...

1 Answer

Hotpoint washer dryer lights flashing


Check first the thermal fuse.

Test heating element to ensure is not grounded, and staying always on. Test the fan and ventilation system.

If you find no fault in there , then test the timer control board.

Enter the model number on one of two websites below to get parts and diagrams for your appliance:


Appliance Parts From PartSelect

Appliance Parts Pros

Apr 23, 2009 | Hotpoint Ariston Aquarius WD420 Front Load...

1 Answer

The on/off button and saver time buttoon are flashing


Yes I have the same problem but the Drying High Heat is also flashing

Feb 22, 2009 | Hotpoint Ariston Aquarius WD420 Front Load...

2 Answers

My hotpoint aquarius wd440 washing machine - flashing lights ?


I have a fairly new Hotpoint Aquarius machine (out of guarantee).
When it is switched on, all of the red lights flash and it will not operate.
Can you help please ??

Oct 18, 2008 | Hotpoint Aquarius WD63 Front Load...

1 Answer

Hotpoint BWD129 1200 spin - unwanted drying cycles


This is more a workaround than a solution. When you choose the washing programme (say "D") and push the on/off button, two lights will flash, the "door locked" and the "drying" one. Now turn the "drying programme" button until the "drying" light stops flashing (in my case, this is true when I set the drying programme to 40°C). Then start the washing mashine.

Seems like the function of the drying programme button has shifted against the settings written on the button...don't ask me why! Of course, no guarantee but works for me. Please let me know if it does for you.

Oct 13, 2008 | QuietLine WD-9900 Front Load Washer /...

1 Answer

ON/OFF & Time saver Button keeps flashing


For mine, it started flashing the on/off light along with the "drying high heat" and the "reduce crease".
Unplugging the unit for 30 minutes appears to have reset the machine and it is now working.

Aug 18, 2008 | Hotpoint Aquarius WD640 Front Load...

1 Answer

Problem during drying cycle


THERE COULD BE TWO POSSIBLE TYPE OF FAULTS FIRST IT COULD BE A FAULTY HEATER THERMOSAT.SECOND THE HEATER HOUSING UNIT MAY NEED TO BE CLEAN OR THE TIMER IS FAULTY

Apr 05, 2008 | Hotpoint Aquarius WD63 Front Load...

2 Answers

I have a BWD 129 Hotpoint intagrated washer dryer and lights 1 2 and 4 are flashing what does this mean and do I need a new machine it will not do a drying cycle?


Filter blocked, disconnect hose from under sink connection and drain into bucket. Hotpoint does not want you to change filter, contact Service Engineer.

Apr 03, 2008 | Washing Machines

1 Answer

Hotpoint WD440G


I SWITH ON THE MACHINE AND F 01 APPEARS

Aug 27, 2007 | Hotpoint Aquarius WD63 Front Load...

Not finding what you are looking for?
Hotpoint Aquarius WD63 Front Load Washer/Dryer Logo

328 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machines Experts

hungoverrr

Level 1 Expert

5 Answers

puggy666

Level 1 Expert

47 Answers

gbob59

Level 3 Expert

2963 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...