Question about Hitachi 43UWX10B 43" Rear Projection Television

1 Answer

No picture this was sudden. The red power light blinks

Posted by on

  • 1 more comment 
  • kreadey Dec 14, 2008

    no picture - red light blinks and makes a "chirping" sound

  • cartyned Dec 20, 2008

    The red light turns
    on,but there is no picture or sound. projection tv hitachi 43"

  • lsucrawdaddy Dec 27, 2008

    Same problem - tv pulses (blinks continuosly) when power is turned on. I have had this problem 2 x before. This time the TV shut down on me while operating. The previous 2 x it happened on a cold start. Had it "repaired" by a Hitachi authorized rep but it continues to occur. Promised myself I would not spend any more $ on this 500lb brick.....



×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 20 Answers

You may need to replace your Tvs convergence board. Go to www.partstore.com and type in your Tv model #. It is a simple swap procedure with no soldering. It costs about $80 or more. It takes 30 to 45 minutes to replace. I just replaced my convergence board on my Akai, which had the same problem and it worked.

Posted on Dec 11, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Will not power up. Red power light only blinks.


If you have sound and no picture, it's time for a new lamp.

In the manual check under LED indication, It explains the blinking lights, unless your outside at night looking up!

May 03, 2010 | Toshiba TZ43V61 43" Rear Projection...

1 Answer

Picture tube


Ur tv tube it still good.It ur deflection board have burn capacitors and transttors.The Fly back transformer is dead also,that where the noise came from.

Dec 07, 2009 | JVC HD-61Z575 61" Rear Projection...

1 Answer

Red power light continuously blinking. no picture no sound.


It could be the lamp went out and needs replacement. The Toshiba website states when this happens to unplug the televison for 10 minutes then plug back in. If that does not work then try another power outlet. If that does not work then call for service

Sep 12, 2009 | Toshiba 57H81 57" Rear Projection...

3 Answers

Screen went dark


Ur video ic inverter board is dead.
U need a new one.

Aug 25, 2009 | Televison & Video

1 Answer

HELP!! PT-53TW53G Panasonic Projection wont power on


5 blinks means your lamp is bad. You can order the part here.http://promotions.partstore.com/Brand-Landing-Pages/Sony/Sony-A.html?s=overture&OVRAW=Sony%20Part&OVKEY=sony%20part&OVMTC=standard&OVADID=31511369012&OVKWID=212386201512

Feb 14, 2009 | Panasonic PT-53TW53 53" Rear Projection...

1 Answer

Red Lights on the Power button blink and picture goes dark


60PL9200D/37 When I unplug it for a while and turn it back on, the picture starts to come on, but it turns dark. And the red lights on the left and right side of the power button blink. Sound but no picture.

Feb 02, 2009 | Philips 60PP9202 60" Rear Projection...

1 Answer

No Picture - Lamp Indicator Blinking


This may be the main power supply, or the lamp supply. This is providing that the new lamp is okay.

The service tech will swap out the modules to service the set.

Jerry G.

May 15, 2008 | Sony Grand WEGA KDF-55WF655 36" Rear...

1 Answer

Sudden shutdown - Red light blinking 3 times


Replace both convergence Ic's Stk392-110 and personally I'd use STK392-150's for greater reliability. Also check all 2.2 ohm 2w resistors for open or change in value and replace as many as needed...
Bill

Apr 18, 2008 | Panasonic PT-53WX52 53" Rear Projection...

2 Answers

No picture or sound - Power Save light blinks red 5 times - nothing on the screen


i also have the same problem with the flashing green light for a while then a different red light starts blinking on and off around 5 times....and i replaced my burnt bulb with a new one...still no picture.

Oct 24, 2007 | Sony Grand WEGA KF50WE610 50" Rear...

Not finding what you are looking for?
Hitachi 43UWX10B 43" Rear Projection Television Logo

Related Topics:

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69745 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

matt martin
matt martin

Level 3 Expert

1198 Answers

Are you a Hitachi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...