- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Over the past few months I have seem more of this issue. I am beginning to think that there may be Microsoft updates that could be conflicting with the wireless network adapter config. But this is only a speculation.
In the mean time, you may have a faulty wireless card. If the unit is under warranty, have Dell replace it. If not, you could disable the internal one and purchase a Linksys Wireless G or N USB adapter from Staples....just to rule it out.
Disable and renable wireless card, even try unistalling the wireless card and reinstall it. update driver for wireless card. then if those fail, put pc next to router if signal still bad then card needs replaced. If your ISP didnt have you power off the router for 30 sec then do so.
Sometimes the built-in Windows Wireless Configuration Utility fouls up. You may have to install and use the Client Manager Application for the TrueMobile 1150 Wireless Network Card.
This is better explained at
Hope this be of some help/idea. Pls post back how things turn up or should you need further information.
Good luck and kind regards.
Assuming you initially set up the router using the wired lan adapter and lead, enabled DHCP in the settings.
First stand right next to your router; Dells wireless is a little tempremental, go to control panel and in there should be Dell wireless monitor, open this up refresh it and see if it finds any wireless networks, if so try to connect.
Dissable your wired network lan adapter.
Go to the properties of your wireless card and on the TCP/IP line click properties again and ensure that obtain an ip address automatically is selected, press ok and restart the pc.