Question about Mitsubishi WD-52525 52" Rear Projection HDTV

2 Answers

Mitsubishi wd-65831 one night worked fine next day nothin..

I turned the set on the next morning and there was sound but no picture..then it turned itself off and the steady red (replace lamp) light came on..pulled the lamp cartridge and it looked fine,,replaced cartridge no problems...powered on tv..you can hear a faint whine like a fan spool up then the color wheel spools up and both go up and down then tv just shuts off ..now i have to reset it to get it to come back on..and as i said worked perfect last night.......someone please help

Posted by on

  • theroseberry Dec 09, 2008

    I also took the lap cover off and propped the door switch down...upon powerup the lamp flickers about 10 times then cycles again when the color wheel spools up the fan also comes on and off with these then it sits there with everything off for about 10 seconds and shuts off.....weird

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I.m having problem were to buy a Mitsubishi lamp cartridge TYPE 915P028010. how much it cost.

Posted on Oct 01, 2009

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 4 Answers

If you hear a whining noise, the odds are it is the color wheel, the bearings are bad in it and will need to be replaced as a whole unit, kinda pricey, my suggestion, sale the bulb and all boards in it and which should fetch about 400+ and invest in a new TV, a color wheel is pricey unless you can find a deal

Posted on Dec 23, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wd-65831 status light constantly blinks


have you tried a new lamp? part# 915P049020
web site: http://www.shopjimmy.com/dlplamps?tv_brands_select=Mitsubishi&tv_models=Mitsubishi+WD-65831

I strongly recommend the original part# as many replacements will not work properly in a Mitsubishi.

May 16, 2015 | Mitsubishi Diamond WD-65831 65" Projection...

1 Answer

Just replaced the lamp after 2 years. TV worked


Make sure that the lamp cage is seating well .. then make sure the door is closed properly. there is a door switch and if the door dont close right the switch may be telling the set the lamp is out.

Oct 23, 2009 | Mitsubishi WD-62531 Projection Television

1 Answer

The input function is not working and the t.v. is on but no picture. Blank screen. Was working last night just fine we tried to hook up Xbox and when the input button was pressed screen went blank. any...


Perform Reset From Front panel of Tv, wait until green light stops blinking, set is running self diagnostic. If that doesn't work, it could be something in the DMD Panel containing the Digital Micromirror Device

Oct 10, 2009 | Mitsubishi Diamond WD-65831 65" Projection...

2 Answers

Mitsubishi 65831


sounds like the projector globe is gone. i think you will need to replace it. if you are lucky there should be a pannel on the side or rear of the tv that allows you to replace the globe. pricey though.

good luck

smeags

Dec 31, 2007 | Mitsubishi Diamond WD-65831 65" Projection...

1 Answer

Mitsubishi WD-62327 no pix and no sound


First do the self diagnosis test, search threads here or go to www.ctechnicians.com

Dec 03, 2007 | Mitsubishi WD-62327 62" Rear Projection...

Not finding what you are looking for?
Mitsubishi WD-52525 52" Rear Projection HDTV Logo

251 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Projection Televisions Experts

matt martin
matt martin

Level 3 Expert

1191 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

The Knight
The Knight

Level 3 Expert

68250 Answers

Are you a Mitsubishi Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...