Question about Cannon Printers & Copiers

1 Answer

Can't load driver onto computer because disc is for windows 2000 and the computer has windows xp for a cannon c3500 multipass printer

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 149 Answers

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Driver Canon Multipass L60 For Xp


According to Canon the Multipass L60 is not compatible with Windows 2000 or XP.

The trick is using the Multipass 6000 driver for windows 2000. This printer is compatible with the MPL60. You need to edit the driver-inifiles (both copies of mpmaster.ini). as follows:

[Setup]
ModelName=MultiPASS L60
SGModelName=Canon MultiPASS L60
BaseName=MultiPASS
PrinterName=Canon MultiPASS L60 Printer
Version=3.01
NTonly=1
[DeviceID]
MFG=Canon
MDL=MultiPASS L60

Please rate me

Nov 19, 2010 | Canon MultiPASS L60 Laser Printer

1 Answer

Cannon multipass f50 printer will not install driver in windows 7


"Replace printhead" to correct the subject issue? Only in your dreams!

May 15, 2010 | Canon MultiPASS F50 All-In-One InkJet...

2 Answers

I NEED DRIVERS FOR MY CANON MP390


cannon have a web site to download drivers. if you have lost the insterlation disk.

Mar 25, 2009 | Canon MultiPASS MP390 All-In-One InkJet...

1 Answer

Canon multipass c3500 installation


I agree that you you will have to go into the Registry and remove the c3500 Printer from it so you canre-install the software without difficulty. If I could connect up with you I could get into the Registry and fix it. for you. The Registry is not for the inexperienced. Bud

Dec 04, 2008 | Printers & Copiers

1 Answer

DOWNLOAD INSTALLATION DISC FOR MULTIPASS C555


Unless you're installing the software on Mac OS9, or Windows 2000 or earlier, the original installation disc isn't going to do you any good. Drivers are available here for Windows XP and earlier and Mac OS9 (there are no drivers available for Mac OS X). Be sure and read all notes (when you click on a driver download link), and get the upgrades for Windows 2000 or Windows XP SP2 if you're installing on either of these systems. Good luck!

Nov 10, 2008 | Canon Printers & Copiers

1 Answer

Canon MultiPASS F60 failure to communicate


Go to this web site. In the search window in the center of the screen, type "windows xp drivers" and click on the Search button. Select the first answer that shows, and you will receive instructions for downloading and installing drivers which were developed for using the MultiPASS F60 with Windows XP SP2.

Sep 26, 2008 | Canon MultiPASS F60 All-In-One InkJet...

3 Answers

Canon Multipass c20 driver for XP


MULTIPASS C20/C50 ON WINDOWS 2000/XP This device is not compatible with Windows 2000 and Windows XP as a multifunctional device. For this product, Canon advertises compatibility with the following operating systems: Windows 95, 98, Millennium Edition (Windows ME).

Printing functionality may be possible by following the steps below.
Step 1 – Install a compatible printer driver.

1. Start the ‘Add Printer Wizard’ from the Printers folder (Windows 2000) or the Printers and Faxes folder (Windows XP).
2. Ensure that the ‘Automatically detect my plug and play printer’ tick-box is not ticked. Press next.
3. When prompted, ensure the printer port is selected on to LPT1. Press Next
4. When the list of manufacturers and models is displayed, click on Canon, and then BJC4200. Press next until the installation is completed.
5. The printer driver should now be installed.

If you are using the BC22e photo cartridge, you will need to download the BJC4200 driver from the www.canon.com.au website.

Step 2 – Setting the Multipass machine to Printer Mode.

1. On the Multipass keypad, press Function, followed by 0.
2. Press the left arrow key until you see Dos Printing.
3. Press Start twice.


If you have successfully completed the above instructions, you may now find that you are able to print to the Multipass machine. To restore the Multipass back to its original mode, press Function, and then Printer Reset.
MULTIPASS C20/C50 ON WINDOWS 2000/XP This device is not compatible with Windows 2000 and Windows XP as a multifunctional device. For this product, Canon advertises compatibility with the following operating systems: Windows 95, 98, Millennium Edition (Windows ME).

Printing functionality may be possible by following the steps below.
Step 1 – Install a compatible printer driver.

1. Start the ‘Add Printer Wizard’ from the Printers folder (Windows 2000) or the Printers and Faxes folder (Windows XP).
2. Ensure that the ‘Automatically detect my plug and play printer’ tick-box is not ticked. Press next.
3. When prompted, ensure the printer port is selected on to LPT1. Press Next
4. When the list of manufacturers and models is displayed, click on Canon, and then BJC4200. Press next until the installation is completed.
5. The printer driver should now be installed.

If you are using the BC22e photo cartridge, you will need to download the BJC4200 driver from the www.canon.com.au website.

Step 2 – Setting the Multipass machine to Printer Mode.

1. On the Multipass keypad, press Function, followed by 0.
2. Press the left arrow key until you see Dos Printing.
3. Press Start twice.


If you have successfully completed the above instructions, you may now find that you are able to print to the Multipass machine. To restore the Multipass back to its original mode, press Function, and then Printer Reset.
MULTIPASS C20/C50 ON WINDOWS 2000/XP This device is not compatible with Windows 2000 and Windows XP as a multifunctional device. For this product, Canon advertises compatibility with the following operating systems: Windows 95, 98, Millennium Edition (Windows ME).

Printing functionality may be possible by following the steps below.
Step 1 – Install a compatible printer driver.

1. Start the ‘Add Printer Wizard’ from the Printers folder (Windows 2000) or the Printers and Faxes folder (Windows XP).
2. Ensure that the ‘Automatically detect my plug and play printer’ tick-box is not ticked. Press next.
3. When prompted, ensure the printer port is selected on to LPT1. Press Next
4. When the list of manufacturers and models is displayed, click on Canon, and then BJC4200. Press next until the installation is completed.
5. The printer driver should now be installed.

If you are using the BC22e photo cartridge, you will need to download the BJC4200 driver from the www.canon.com.au website.

Step 2 – Setting the Multipass machine to Printer Mode.

1. On the Multipass keypad, press Function, followed by 0.
2. Press the left arrow key until you see Dos Printing.
3. Press Start twice.


If you have successfully completed the above instructions, you may now find that you are able to print to the Multipass machine. To restore the Multipass back to its original mode, press Function, and then Printer Reset.

Feb 06, 2008 | Canon MultiPASS C20 InkJet Printer

2 Answers

Failure to Communicate


try re installing the drivers for this printer check all cable connections once again. did the printer work well at ur frens place? and wat os did he use??

Aug 29, 2007 | Canon MultiPASS F60 All-In-One InkJet...

Not finding what you are looking for?
Printers & Copiers Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cannon Printers & Copiers Experts

Cosma Papouis
Cosma Papouis

Level 3 Expert

404 Answers

Cindy Wells

Level 3 Expert

4754 Answers

Ray Smith

Level 2 Expert

124 Answers

Are you a Cannon Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...