Question about Beverage-Air Beverage Air DW49-S Horizontal Bottle Cooler
I am looking at purchasing a used unit. I need to know the approx. age of unit. The model number is DW 49 SRL #2218919. Any help at all would be appreciated
Call Beverage-Air and provide both model and serial # to the parts department and they should be able to identify the year the unit was manufactured - 800-845-9800
Matt - coolergaskets.com
Posted on Jan 03, 2014
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: bev air cooler
Bill, the main reason I've noticed for higher than normal temps in these boxes is filthy condenser coils (this will affect pressures in your sealed system). Remove the front lower panel and inspect your coils. Use a coil brush or a dust broom to thoroughly clean them up, don't use water. You can also pick up some condenser coil cleaner in a spray can from your local appliance parts store, but it's not necessary (the fumes are strong and may be objectionable to your customers... it gets 'em really clean, though!) After cleaning the coils, allow 24 hours for temps to stabilize. If they don't, here is a site for Beverage-Air, contact your local servicer with you exact model and serial number for pressure specifications. http://www.beverage-air.com/technical.service.html Hope this helps! Let us know, will ya?
Posted on Aug 13, 2007
SOURCE: fan runs all the time
The inside fan has to run all the time. It turns off it will not keep things cold. Not the fan outside in the air it shoulc cycle with the compressor.
Posted on Apr 01, 2009
Normally thermal overloads have a button like appearance on the compressor. Designed to open circuit when temp has caused distortion to the bi-metal contacts. Upon cooling will close again. Disconnect power before checking continunity on the overload terminals.
Posted on Nov 18, 2011
Tips for a great answer:
Aug 25, 2013 | Beverage-Air BM23
Jun 28, 2013 | Kenmore 35 Bottle Capacity Wine Cellar
Sep 13, 2011 | Kelvinator Refrigerators
Jul 08, 2011 | Beverage-Air MT45 Beverage Cooler...
Apr 27, 2011 | Beverage-Air MT35 Beverage Cooler...
Jan 02, 2011 | Beverage-Air Beverage Air ''Prestige...
Sep 05, 2010 | Beverage-Air MT45 Beverage Cooler...
Jun 09, 2009 | Carrier Beverage-Air UR30GEFD Beverage...
Dec 24, 2008 | Beverage-Air Beverage Air DW49-S...
175 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: