- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
try to unplug replug the usb cable of the printer.
You may also go to control panel printer and faxes and look for the printer of your 5300 now if you see 2 icons delete them both then exit to printer and faxes. and unplug/replug your USB cable then restart computer.
If this issue not solve try to uninstall the software and download the clearutility kodak.com/go/clear. then after doing this restart computer.
Kodak AiO home center, serve as a driver as well for your printer to print from the computer. It will let you scan, copy or print pictures. AIO home center will let you select the settings you want for your printer
Double-click the KODAK AiO Home Center icon. If the error occurs again, go to the next step.
Set administrator rights for the Home Center application:
For WINDOWS XP OS:
Right-click on the Home Center icon.
Click the Compatibility tab.
Clear all the check boxes.
Click Apply and OK.
Double-click the KODAK AiO Home Center icon. If the error occurs again, go to the next step. IMPORTANT: In the next step, before you install the Home Center Software, make sure you disconnect the USB cable. Then, connect the USB cable when the software installation instructions tell you to do so.
Upgrade the software and firmware for your printer:
I fixed my error code 1-2036 by going to the "Configure Settings" in
the AiO Home Center then selected AiO Printer changed to "Print
Quality" to Draft and clicked OK.... Then I was able to Scan with no
errors. I think the config settings were corrupted some how and this
resaved them properly.
if that doesnt help
Go to Control Panel Double Click on Printers and Other Hardware Double Click on Scanners and Cameras Double Click on Kodak 5100 AiO Click Next Read and follow directions
if both the solutions doesnt help... its time to call kodak
you need to uninstall the software and reinstall it, if you have not tried that. For XP Start-->control panel-->add/remove programme-->look for Kodak Printer software and uninstall it. For Vista Start-->control panel-->programmes and features and uninstall the software. Run the Kodak clear utility from http://unexpectedtwist4u.com/matthew and click on clear utility and you can either run it or save it first and then run it. Make sure to unplug the USB cable after uninstalling the software and reinstall the software from www.kodak.com/go/esp3downloads. Kodak phone support is open from 9 am to 12 midnight EST. Hope that works:)