Question about Hitachi Televison & Video

1 Answer

HITACHI ULTRAVISION 60" MODEL # 60SX10B COLOR NOT IN SINC

I HAVE A 1996 HITACHI ULTRAVISION MODEL #60SX10B, THE BLUE COLOR IS ABOUT 2" TO THE LEFT OF THE RED AND GREEN. SO FAR I HAVE READ THIS TO BE A COLOR CONVERGENCE PROBLEM AND THE PARTS (2 OF THEM STK 392-110) WOULD NEED TO BE REPLACED. IT WAS SUGGESTED TO REPLACE THEM WITH STK 392-150. DOES THIS SOUND TO BE THE CORRECT SOLUTION? IF SO WHERE ARE THESE PARTS LOCATED? I CAN'T CALL A REPAIRMAN TOO MUCH $$$. ANY HELP ON THIS MATTER WOULD BE DEEPLY APPRECIATED. CALLING HITACHI WAS NO HELP. THANKS

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Hitachi Master
  • 5,138 Answers

Yes replace both STKs, I always use the 392-180s they are the king of ICs ,also look for burt or open low ohm resistors you may have a few bad ones . you can go to www.electroix.com they have the parts you need 1-800-223-3205 if you need anymore help let me know.

Posted on Dec 09, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HITACHI ULTRAVISION DIGITAL TV.MODEL NO: SP60WS lamp light is red


The lamp should be replace to fix the no picture since the lamp light is red.
Download the user's guide and see pages # 69-72 for lamp replacement.

Jul 10, 2010 | Hitachi 60V710 60" Rear Projection HDTV

2 Answers

I have a hitachi ultravision and the blue is off center.


your convergances amps ics have failed and need to be replaced alone with the 2 burnt resistors you will find then run magic focus

Nov 30, 2009 | Hitachi 53UDX10B 53" Rear Projection...

5 Answers

50 inch Hitachi Ultravision LCD Rear Projection Television


Hitachi has had problems with their light engines. Very expensive. Contact Hitachi as they may give you consideration even if this is out of warranty.

Apr 15, 2009 | Hitachi UltraVision CineForm 55VG825 55"...

1 Answer

Hitachi UltraVision Projection TV #60SX10B- Need Help


Main system control memory IC fault. This is a very small IC; have 8 solder terminals, and can be located very near to the main system control-chroma IC. Check and replace it. Be sure to replace it with the same number printed on it; in all respect. Otherwise, it won't go. http://electronicshelponline.blogspot.com/ Before replacing it, try a reset to this set, and then check.

Mar 26, 2017 | Televison & Video

1 Answer

HITACHI ULTRAVISION 60" COLOR NOT IN SINC


Look for the board that has 2 big black ics with STK printed on them.

Dec 09, 2008 | Televison & Video

1 Answer

PROJECTION TV HITACHI ULTRAVISION COLOR CONVERGENCE PROBLEM


it sounds like your blue convergence ic is getting weak you need to replace the ic's STK392-110 and you should replace both because when 1 is bad the other will go real soon. They are inexspensive at the sight I posted and you will also get free tech online support if you purchase them there.
http://servicemanuals.vstore.ca/

Apr 12, 2008 | Hitachi 53UDX10B 53" Rear Projection...

3 Answers

Hitachi ultravision 60" LCD with red glow in center


I emailed Hitachi and they sent a new light engine to my local electronics store that they do business with. All I had to pay for was the installation which was today. I did not have to pay for the part or shipping. My tv is just like new again and the red glow is gone. I did not realize how bad it had gotten. Do not call the regular customer service because they cannot or do not want to help.

Oct 17, 2007 | Hitachi UltraVision CineForm 55VG825 55"...

1 Answer

Hitachi 60 inch ultravision


KIT10 $29.50
Repair Kit for Hitachi convergence Chassis DP-14G
KIT10 Includes 2 pcs STK392-150 , 1 each of the following 1W axial lead fusible resistors:


http://www.digitalhome.ca/forum/showpost.php?p=564268&postcount=220
http://cmpalmer.blogspot.com/2006/11/fixing-my-own-tv-part-ii.html

Oct 15, 2007 | Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

151 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Televison & Video Experts

Jaime Hernandez

Level 3 Expert

2318 Answers

The Knight
The Knight

Level 3 Expert

74468 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Hitachi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...