Question about NorStar Meridian M7310 Phone

1 Answer

Trying to set time

I am trying to set the time on my office's meridian M7310 phones. The code **8463 does not work. I can enter **23646 and it does go to password but when I try entering 23646 as my password it will not take it and just stays on the password screen. What am I doing wrong?

Posted by on

  • 7 more comments 
  • squire_inari Dec 09, 2008

    Here is everything on the barcode on the back



    A0409175 NT8B20AF-93

    M7310

  • squire_inari Dec 09, 2008

    Here is everything on the barcode on the back



    A0409175 NT8B20AF-93

    M7310

  • squire_inari Dec 09, 2008

    Here is everything on the barcode on the back



    A0409175 NT8B20AF-93

    M7310

  • squire_inari Dec 09, 2008

    Here is everything on the barcode on the back



    A0409175 NT8B20AF-93

    M7310

  • squire_inari Dec 09, 2008

    A0409175 NT8B20AF-93

    M7310 REL 16A

    9447 960500



    NNTM0400A3GZ

  • squire_inari Dec 10, 2008

    where would i find the system model number for the phone?

  • rwbrahm Feb 03, 2009

    I'm having the same issue. When I hit "Feature" then "**8463" it takes me to a screen that says "Password: " with retry on the bottom right.



    I try to type in 266344 and nothing happens. Heck i've tried everything I know and it just sits there. The only thing I can do is hit rls(Release).



    If anyone can help please drop a line.



    Thanks.



    U.S. Coast Guard Kodiak.

  • Carl Navarro
    Carl Navarro May 11, 2010

    Oops, I think your mouse is broken too :-)



    The phone is part of a SYSTEM and all phones are cabled to it. A phone has no programming in it, it's part of the system. Please try to find the model number of the SYSTEM.



  • Carl Navarro
    Carl Navarro May 11, 2010

    Why would I guess that you might have a BCM-50? Either that, or the password has been changed. Try finding the part number on the cabinet and post back.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Try using password 266344

Posted on Dec 12, 2008

  • jk2k Dec 12, 2008

    another password is BASIC = 22742

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Cannot acces AdminSystem using **23646 what can I do? I do NOT want **266344, I need ADMIN SYSTEM. HELP!!!


Have you tried (F)**ADMIN ?

What specifically are you trying to do? (F)**CONFIG usually gives access to everything including the lower levels like Admin, Time, etc.

Feb 10, 2015 | NorStar Meridian M7310 Phone

1 Answer

Code for date & time


Depends on which system you have. M7310 is just the phone model which is compatible with all norstar meridian systems.

The easiest way (which only works on one of the phone system models) is to dial Feature ** TIME
and use 23646 as the password. If feature **TIME doesn't work for you, it might be best to do it with someone over the telephone since it can be slightly tricky.

May 10, 2011 | NorStar Meridian M7310 Phone

1 Answer

How do I set or change time on display


C'mon. Seriously. Have you heard of Google?
Go to Google, and type in, meridian m7310 phone setting time date.
Too hard?
Here's a link then: http://www.alphatelecom.ca/norstar_date_time_program.htm
Still too hard?
Then it's,
1. feature **8463 (as in "time")
2. password 23646 (as in "admin")
3. hit "change" or "next" and change time components as needed until it displays "end of list"
4. hit "rls" button

Hope that helps. (~face palm~)

Feb 09, 2010 | NorStar M7310 Corded Phone

1 Answer

Norstar 7324 time change


Programming should be done from the M7310, M7324 or the T7316E set. Administration access code: Feature * * 266344 which also is Feature * * config.
If asked for a password enter 23646.

When in programming2.gif just press the next button(lower right arrow) until you see what you want to change. Then press show ( top right arrow) ,then change if you want to change it. If you pass it, just press back (lower left)
Example: To change the Time & Date Press next until you see Time & Date. Then show Then change Then change again, change it if you need to, Then next again until you see what you need to change. For example; only the hour needs to be changed for day light savings time. Just press next until you come to the Hour. Then Change it. Then press release RLs when your done.

Sep 21, 2009 | NorStar Meridian M7310 Phone

1 Answer

Change number of rings


To change # of rings you have to go into programing OK press feature * * on the main set and config (266344) then the password admin (23646) this goes to terminals and sets hit show and enter the set you want to change go to capabilities this will allow you to chang # of rings on that set

Mar 17, 2009 | NorStar Meridian M7310 Phone

3 Answers

Change name on a Nortel M7324


1. Press the Rls button then ** FEATURE 266344 (CONFIG)
2. Password is 23646 (ADMIN) The display reads Terminals & Sets
3. Press SHOW ans enter the Extension for which you want to enter a name.
4. Press SHOW, again
5. Press the NEXT key until the display reads NAMES at the top left corner.
6. The bottom right corner reads CHANGE, press the far right soft key.
7. To move from one letter to the next use the far right and far left soft keys or the # key.
8. When you are finished Press next.
9. Press the HEADING key to get back to TERMINALS & SETS and start again!

Navigation Keys: Line 1 = HEADING Speed Dial = SHOW
Line 2 = BACK Last No. = NEXT

This can only be done from the main handset and only one at a time. The Soft Keys are the three small buttons right bellow the screen.

Jan 28, 2009 | NorStar M7324 Telephone

1 Answer

Can't get into admin mode


Have you tried downloading the manual to see if there is a way to reset the master admin code? If what you tried didn't work, maybe it's easier to go back to square 1.

But be prepared, a master reset may render the system useless until various operating perameters have been re-entered.

Jan 24, 2009 | Nortel Meridian M7208 Corded Phone

1 Answer

Setting date & time on M7310


Normal 0 TIME CHANGE PROCEDURE: DONE FROM THE MAINPHONE
Press FEATURE **8463 – Display shows PASSWORD:
Then type in 23646 (Note this number will not show on display)
The display will shoe hours.
Press CHANGE (or NEXT if you do not need to change the hour).
Enter the hour (00 to 23). If number is less than 13, the display shows AM.
Press CHANGE to select PM.
Press NEXT. The display shows minutes.
Press CHANGE (or NEXT if you do not need to change the minutes).
Enter the minutes (00 to 59).
Press NEXT. The display shows year.
Press CHANGE (or NEXT if you do not need to change the year).
Enter the last two digits of current year.
Press NEXT. The display shows month.
Press CHANGE (or NEXT if you do not need to change the month).
Enter the month (01 to 12).
Press NEXT. The display shows day.
Press CHANGE.
Enter the day of the month (10 to 31)
Press RLS (release) to exit.

let me know how you get on


Sep 15, 2008 | NorStar M7310 Corded Phone

2 Answers

Changing Time and Date


i had this problem a while ago, you have to set the time from the main phone

Press FEATURE **8463 – Display shows PASSWORD:
Then type in 23646 (Note this number will not show on display)
The display will show hours.
Press CHANGE (or NEXT if you do not need to change the hour).
Enter the hour (00 to 23). If number is less than 13, the display shows AM.
Press CHANGE to select PM.
Press NEXT. The display shows minutes.
Press CHANGE (or NEXT if you do not need to change the minutes).
Enter the minutes (00 to 59).
Press NEXT. The display shows year.
Press CHANGE (or NEXT if you do not need to change the year).
Enter the last two digits of current year.
Press NEXT. The display shows month.
Press CHANGE (or NEXT if you do not need to change the month).
Enter the month (01 to 12).
Press NEXT. The display shows day.
Press CHANGE.
Enter the day of the month (10 to 31)
Press RLS (release) to exit.


Apr 16, 2008 | NorStar M7310 Corded Phone

Not finding what you are looking for?
NorStar Meridian M7310 Phone Logo

Related Topics:

233 people viewed this question

Ask a Question

Usually answered in minutes!

Top NorStar Lands Phones Experts

george  peters
george peters

Level 3 Expert

858 Answers

kakima

Level 3 Expert

98762 Answers

dan4261

Level 1 Expert

14 Answers

Are you a NorStar Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...