Question about Frigidaire GLEQ2152ES Electric Dryer

1 Answer

Drive belt on Zanussi TD520

Can anyone help my husband with the instructions on how to fit a drive helt to our Zanussi TD520 Tumble Dryer?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

You will need to take the drum out of the rear bearing by undoing one of the sides and the back panel. Use selotape to hold the new belt in place and use a longish 'philips' screwdriver so that it does not cut the belt if it slips and ease the belt over the pulley with grooves that is near the fan. It is tricky!

Posted on Dec 09, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I keep asking but dont get answers help please


There is a video here on how to replace a belt on a dryer. I have done this before and most dryers are the same. You have to take them apart. It is not a real easy job. Hope this helps. Scroll down to the bottom of page to see video.

http://www.espares.co.uk/part/tumble-dryers/zanussi/td4112w/p/1088/332/0/553236/501196/tumble-dryer-drive-belt.html

Dec 02, 2011 | Zanussi TD4112W Electric Dryer

1 Answer

How to fit a drive belt to a indesit g511v tumble dryer


http://www.apart4u.co.uk/video-tutorials/tumble-dryer-repairs/how-to-replace-a-belt-on-a-tumble-dryer-stretch-type.html

Hi the above web page is a good general instruction video on how to change a tumble dryer belt, should help, if it does please remember to rate me

Feb 24, 2011 | Dryers

2 Answers

How to change a belt on hotpoint tdl54 tumble dryer


The belt goes around the pulley of the motor after fitting it around the drum first.

Mar 23, 2010 | Hotpoint Dryers

1 Answer

Fit new drive belt to tumble dryer


I need to know more. like how to instal belt or how to find what belt fits your dryer . need more info like mod # there 5 different belts for hotpoint . and several different ways to install them so model # ______________ needed . **** . pls .

Jan 02, 2010 | Dryers

2 Answers

Zanussi TC470 Belt Tensioner


Do you have it fitted correctly to the idler pulley?

May 19, 2009 | Dryers

1 Answer

Zanussi tumble dryer. no.TC7114W


loop the belt around the drum.
slide the belt down the drum directly over the motor pulley
loop the belt around the motor pulley
pull the tensioner pulley hard to the end of its travel against its spring
wrap the belt around the tensioner pulley
release the tensioner so the spring pulls it against the belt
rotate the drum by hand to ensure the belt is aligned and does not pull offf the pulleys
reassemble case
dry clothes
its easier than it looks seeing a broken belt in the bottom of the case.
e072eb2.jpg

Aug 07, 2008 | Zanussi TC7114W Electric Dryer

2 Answers

Fitting tumble dryer drive belt


Looking from rear of dryer,one spring on motor is for tension,therefore put belt around drum(groove to the drum surface).Then rotate the motor firmly clockwise tensioning the spring,take belt from right of drum over tension wheel then put grooves of belt on shaft of motor.Release motor to tension spring,job done !!!!!

Mar 28, 2008 | Dryers

Not finding what you are looking for?
Frigidaire GLEQ2152ES Electric Dryer Logo

Related Topics:

257 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Electrolux
Electrolux

Level 3 Expert

4342 Answers

Tim Whalen

Level 3 Expert

3056 Answers

Are you a Frigidaire Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...