Question about Safe International Digital Electronic Safe Lockbox Gun Jewelry Lock Box Tool

10 Answers

Forgot pin code to unlock my hardline digital safe

I then used the override key to unlock so need to reset the pin code can you help with instructions on how setup a new code. e-mail:victormathole@gmail.com

Posted by on

  • 6 more comments 
  • Anonymous Dec 29, 2008

    hardline digital electronic safe, battery down, so cannot enter pin.  what should I do

  • JakkalsM Jan 06, 2009

    I just bought a safe and do not have the pin code to open the safe. Does anyone know ehat the default pin is?




  • OliverLee Jan 09, 2009

    does anyone know the default pin to unlock the hardline electronic safe? Please! Email: Oliverlee7@gmail.com.
    THANX (*_*)

  • pillayr61 Feb 04, 2009

    I have two of these safes and have lost both the pin codes

    please can you help.



    Tel: 031-201 8065

    email: admin@jordins.co.za

  • BigBadChad Apr 02, 2009

    I lost the key to the hardline digital safe and the battery is flat! I need to get another key - I have the seril number - wher do I get another key from?

  • Anonymous Apr 11, 2009

    To Whom this may concern,



    We are not sure on how to reset the code on our Hardline, Digital Electronic Security Sage: S2120



    Kindly advise with specific instructions.



    Warm regards,

    Elize Wentzel

    Crystal Lagoon Lodge

    022 7720550

  • zuluherbs Apr 15, 2009

    I locked the key for my Hardline Digital Security Safe including its manual in the safe, I dont have the unlocking code and I need a default code.

  • Anonymous Apr 22, 2009

    i have lost both spare keys and the batteries are flat is there any thing i can do

×

10 Answers

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I have pin code but batteries went flat while I was on holiday, how do I unlock my Hardline digital safe? I do not have override key

Posted on Dec 27, 2010

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I HAVE FORGOT THE UNLOCK CODE OF MY ELECTRONIC SAFE, THEIR IS NO KEY SYSTEM, I HAVE THE COMPANY ORIGINAL CODE WHICH I HAVE TRIED BUT IT DIDNT OPEN CAN YOU SUGGEST ME WHAT TO DO.

Posted on Apr 12, 2009

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

User override key to open safe.
Then:
a. Inside the open door you would find hidden a red button press this button, the yellow light will be on, input the user code in 30 seconds try 1,5,9 then press A or B to finish

b. If the yellow light keeps flashing with beeps the code is wrong( revere to user manual)

c. To change code repeat step a.

Test your new code before closing safe.

PCS Solutions Montana, Zambezi, Pretoria
012 548 4191

Posted on Feb 26, 2009

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 1 Answer

I have forgotten the pass code to my amsec dl4000 safe and have no idea where the key is, is there any overide code that i can use?? i think my passport is in it!!

Posted on Sep 05, 2011

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I have normal nutool eletronic digital safe SF20-2, i forgot pass code and i dont have key to open what can i do? please help

Posted on Dec 01, 2009

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Can you show my code

Posted on May 31, 2009

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Answer to break code for pro series safe box digital codes.
1.forget key code use key to open first and press red button(door hidden)then press green button show this sign (#) when for 2 seconds you will see the dash ----------- punch 1234.will solve the solution.thank so much.

Posted on Sep 03, 2010

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Filmmaker:

    Uploaded 5 video answers.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 22 Answers

IF YOU HAVE FORGOTTEN THE CODE AND WANT TO BREAKTHROUGH THE SAFE IN THAT CASE YOU FIND THIS LINK HELPFUL:
http://www.youtube.com/user/harisonkeys?feature=mhee

Posted on Nov 30, 2012

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a electronic digital safe im putting right code in and green lights coming on to open the door but it won't , iv also tryed my key and that won't work either, what can I do I need my pass

Posted on Apr 06, 2014

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have the key but i dont known how to use the key!! help me!!!

Posted on Nov 03, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I changed my pin code to get into my zte prelude phone. Is there a default code (s) that will let me in my phone???


well michelle, if you forgot your pin to unlock your phone you might need to factory reset it if you ever want to use it again there are a number of ways of unlocking an android phone which are included in the link to enter factory mode/recovery mode press and hole volume down and the power on key at the same time when the phone is off and hold these keys until you see the logo of your phone. Instructions are available at the site below :
www.joyofandroid.com/how-to-unlock-android-phone/#
Just copy and paste in the url bar of your browser

Jul 07, 2015 | ZTE Cell Phones

1 Answer

How do you master reset a gravity touch


If your Samsung Gravity T (T669) is stuck on the PIN lock screen and you do not have the code to unlock, you can try a master unlock code... 73683139 to override and then go to settings and turn off lock feature. When you reactivate lock feature it will prompt you to select a new PIN.

If your phone requires the T-mobile PUK code to unlock (you get a message that says call support PIN is locked) the PUK unlock for this phone is **05*22998214*0000*0000#. This will unlock device and reset PIN to 0000.

Enjoy.

Jan 24, 2011 | Samsung Gravity Touch T669

1 Answer

Hello I am seeing a blue screen and a lock on the bottom left corner. I am unable to change channels or input. Please advise.


Hello

Your Apex Tv is locked. You must unlock it and reset all the V-chip settings once more. To unlock it do the following.

Apex TVs use a four digit code to control the v-chip. The override code for many models is 6688. Other sets may not have one, or may have a default code of 1225 instead of an override code.

1. To use the override code:

2. Hit the MENU key to get to the menus.

3. Go down to the SYSTEM menu and hit the right arrow on the remote control.

4. Once in the SYSTEM menu, go to PARENTAL GUIDE. It will ask for your code.

5. Enter the override code listed above. From here, you can turn on and off different rating restrictions, as well as set a new code.
No matter what the V-chip code is set to, the override code will still work. If you have a blank screen with a red key on the bottom left, simply press the (function or F) button and the mute button at the same time. This will unlock the screen and allow you to view the channel as desired
OK.

Jan 11, 2011 | Apex Digital Televison & Video

1 Answer

I have gotten and hdtv from a friend and when I turn tv on it says I need a pin number to enter. I can not get a hold of them to get pin. Is there anyway I can override this in the settings program?


The Factory code number is 0 0 0 0 If the code has been changed, You can select to reset it using the Setup Code either under the channel blocking or setup code section.
Once there, Press 0 7 1 1
You will be given a message "INCORRECT ACCESS CODE" Press 0 7 1 1 on the remote again
Next, "enter your new access code" shows on screen.
Now you can enter a new 4 digit code. (write it down somewhere)

Dec 03, 2010 | Philips Televison & Video

1 Answer

Bought a electronic deadbolt at Rona (Rona Collection). Installed it and i can open/close it with the remote control or a key. Can't open it by entering a code. I thought the factory code was 1234, but...


Rona Electronic Deadbolt Lock Instructions:
Default Master Code:123

Resetting Master PIN:
  • Remove batteries and put them back. You will hear a long beep and a short beep.
  • Press and hold the 0 button until you hear 3 long beeps and the LED flashes red for 3 seconds. You are now in program mode.
  • Within 10 seconds, key in a new master PIN (up to 12 digits) and press the UNLOCK button.
  • Key in the master PIN again and press the UNLOCK button. The LED will flash green for 1 second and the resetting is complete.

Adding a PIN:
  • Key in master PIN and press UNLOCK button
  • Press and hold 0 button until you hear 2 short beeps and the LED flashes for 3 seconds.
  • Release 0 button and you are in the Add PIN mode
  • Within 10 seconds, enter a new PIN and press the UNLOCK button. You will hear one beep.
  • Key in the new PIN again and press the UNLOCK button twice. When the LED stops flashing the PIN has been added.

Sep 23, 2010 | Deadbolt Locks & Locksmithing

1 Answer

Forgot my pin


Wedll if this is not a stolen GPS Then the matter is simple. Take it back to the exact coordinates that you set the pin in. Then you will be able to access the pin setup and reset it to a new password. Your only other choice is to send it to Garmin, but if it has been listed as stolen, then expect the cops! No one forgets their pin or fails to remember the instructions for setting and recovering their pin.


Unfortunately, even if you perform master reset on Garmin GPS unit, it does not reset Garmin Lock security feature, which password-protect most Garmin electronic devices to deter theft. If you forget the PIN or password unlock code to unlock the Garmin unit, the best solution is to bring it to Garmin to get unlocked. “

Please rate my help++++Thanks for using FIXYA

May 23, 2010 | Garmin nuvi 260W GPS Receiver

2 Answers

HELP to unlocked tv


You will need the original remote control to unlock this set. Apex TVs use a four digit code to control the v-chip. The override code for many models is 6688. Other sets may not have one, or may have a default code of 1225 instead of an override code.
  1. To use the override code:
  2. Hit the MENU key to get to the menus.
  3. Go down to the SYSTEM menu and hit the right arrow on the remote control.
  4. Once in the SYSTEM menu, go to PARENTAL GUIDE. It will ask for your code.
  5. Enter the override code listed above. From here, you can turn on and off different rating restrictions, as well as set a new code.
No matter what the V-chip code is set to, the override code will still work. If you have a blank screen with a red key on the bottom left, simply press the (function or F) button and the mute button at the same time. This will unlock the screen and allow you to view the channel as desired.

Mar 07, 2008 | Apex Digital AT2002S 20" TV

3 Answers

Apex tv pf2030 child lock


I'm afraid you will need the original remote control hand unit folks. Apex TVs use a four digit code to control the v-chip. The override code for many models is 6688. Other sets may not have one, or may have a default code of 1225 instead of an override code.
  1. To use the override code:
  2. Hit the MENU key to get to the menus.
  3. Go down to the SYSTEM menu and hit the right arrow on the remote control.
  4. Once in the SYSTEM menu, go to PARENTAL GUIDE. It will ask for your code.
  5. Enter the override code listed above. From here, you can turn on and off different rating restrictions, as well as set a new code.
No matter what the V-chip code is set to, the override code will still work. If you have a blank screen with a red key on the bottom left, simply press the (function or F) button and the mute button at the same time. This will unlock the screen and allow you to view the channel as desired

Jan 19, 2008 | Apex Digital PF2025 20" TV

4 Answers

Tv guardian


I have the manual for the dwm-380 sanyo dvd with tvg.
Go to setup. Then Parental controls. Then scroll down to where you can enter a 4 digit code. To unlock and reset, enter 788444. I know this is 6 digits punch in all 6 then hit enter. This will unlock it. Next, you enter in your 4 digit number. This is your personal code. This may or may not work on other models. Take care.

Jan 13, 2008 | Sanyo DWM-380 DVD Player

Not finding what you are looking for?
Safe International Digital Electronic Safe Lockbox Gun Jewelry Lock Box Tool Logo

19,097 people viewed this question

Ask a Question

Usually answered in minutes!

Top Safe International Locks & Locksmithing Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

john h

Level 3 Expert

8286 Answers

Jay Finke
Jay Finke

Level 3 Expert

1224 Answers

Are you a Safe International Lock and Locksmithing Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...